Makita TD111D User manual

TD111D
EN Cordless Impact Driver INSTRUCTION MANUAL 4
ID Obeng Ketok Listrik Tanpa
Kabel PETUNJUK PENGGUNAAN 11
VI Máy bắt vít chạy pin TÀI LIỆU HƯỚNG DẪN 18
TH   25

1
2
3
Fig.1
1
2
Fig.2
1
Fig.3
1
Fig.4
1
Fig.5
1
AB
Fig.6
4
1
2
3
5
Fig.7
Fig.8
2

12
Fig.9
13
2
Fig.10
3
2
1
Fig.11
Fig.12
1
2
Fig.13
Fig.14
Fig.15
3

4ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: TD111D
Fastening
capacities
Machine screw 4 mm - 8 mm
Standard bolt 5 mm - 14 mm
High tensile bolt 5 mm - 12 mm
No load
speed
Hard impact mode 0 - 3,000 min-1
Soft impact mode 0 - 1,300 min-1
Impacts
per minute
Hard impact mode 0 - 3,900 min-1
Soft impact mode 0 - 1,600 min-1
Rated voltage D.C. 10.8 V - 12 V max
Overall length 135 mm
Battery cartridge BL1016, BL1021B BL1041B
Net weight 0.97 kg 1.1 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsandbatterycartridgemaydifferfromcountrytocountry.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Cd
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings and
all instructions. Failure to follow the warnings and
instructionsmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical Safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of

5ENGLISH
electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool. Carrying power tools with
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.
4. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
resultinpersonalinjury.
5. Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
6. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing, and gloves
away from moving parts.Looseclothes,jewel-
lery or long hair can be caught in moving parts.
7. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Power tool use and care
1. Do not force the power tool. Use the correct
power tool for your application. The correct
powertoolwilldothejobbetterandsaferatthe
rate for which it was designed.
2. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
3. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
4. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
5. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
Battery tool use and care
1. Recharge only with the charger specied by
the manufacturer. A charger that is suitable for
onetypeofbatterypackmaycreateariskofre
when used with another battery pack.
2. Use power tools only with specically desig-
nated battery packs. Use of any other battery
packsmaycreateariskofinjuryandre.
3. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nalstogethermaycauseburnsorare.
4. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, ush with water. If
liquid contacts eyes, additionally seek medical
help.Liquidejectedfromthebatterymaycause
irritation or burns.
Service
1. Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
2. Follow instruction for lubricating and chang-
ing accessories.
3. Keep handles dry, clean and free from oil and
grease.
Cordless impact driver safety
warnings
1. Hold power tool by insulated gripping sur-
faces, when performing an operation where
the fastener may contact hidden wiring.
Fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
2. Always be sure you have a rm footing.
Be sure no one is below when using the tool in
high locations.
3. Hold the tool rmly.
4. Wear ear protectors.
5. Do not touch the bit or the workpiece immedi-
ately after operation. They may be extremely
hot and could burn your skin.
6. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.

6ENGLISH
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical atten-
tion right away. It may result in loss of your
eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any con-
ductive material.
(2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
(3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
ow, overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50 °C (122 °F).
7. Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
out. The battery cartridge can explode in a re.
8. Be careful not to drop or strike battery.
9. Do not use a damaged battery.
10. The contained lithium-ion batteries are subject
to the Dangerous Goods Legislation require-
ments.
For commercial transports e.g. by third parties,
forwarding agents, special requirement on pack-
aging and labeling must be observed.
For preparation of the item being shipped, consult-
ing an expert for hazardous material is required.
Please also observe possibly more detailed
national regulations.
Tape or mask off open contacts and pack up the
battery in such a manner that it cannot move
around in the packaging.
11. Follow your local regulations relating to dis-
posal of battery.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causingres,personalinjuryanddamage.Itwill
also void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
FUNCTIONAL
DESCRIPTION
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing or removing battery
cartridge
CAUTION: Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION: Hold the tool and the battery car-
tridge rmly when installing or removing battery
cartridge. Failure to hold the tool and the battery
cartridgermlymaycausethemtoslipoffyourhands
and result in damage to the tool and battery cartridge
andapersonalinjury.
►Fig.1: 1. Red indicator 2. Button 3. Battery cartridge
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
CAUTION: Always install the battery cartridge
fully until the red indicator cannot be seen. If not,
itmayaccidentallyfalloutofthetool,causinginjuryto
you or someone around you.
CAUTION: Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.

7ENGLISH
Battery protection system
The tool is equipped with a battery protection system.
This system automatically cuts off power to the motor to
extend battery life.
The tool will automatically stop during operation if the
tool and/or battery are placed under one of the following
conditions:
Overloaded:
The tool is operated in a manner that causes it to draw
an abnormally high current.
In this situation, turn the tool off and stop the application
that caused the tool to become overloaded. Then turn
the tool on to restart.
If the tool does not start, the battery is overheated. In
this situation, let the battery cool before turning the tool
on again.
Low battery voltage:
The remaining battery capacity is too low and the tool
will not operate. If you turn the tool on, the motor runs
again but stops soon. In this situation, remove and
recharge the battery.
Indicating the remaining battery
capacity
Only for battery cartridges with “B” at the end of the
model number
►Fig.2: 1. Indicator lamps 2. Check button
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
light up for few seconds.
Indicator lamps Remaining
capacity
Lighted Off
75% to 100%
50% to 75%
25% to 50%
0% to 25%
NOTE: Depending on the conditions of use and the
ambient temperature, the indication may differ slightly
from the actual capacity.
Switch action
►Fig.3: 1. Switch trigger
CAUTION: Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the “OFF” position when released.
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop.
NOTE: The tool automatically stops if you keep pull-
ing the switch trigger for about 6 minutes.
Lighting up the front lamp
CAUTION: Do not look in the light or see the
source of light directly.
►Fig.4: 1. Lamp
►Fig.5: 1. Button
Pull the switch trigger to turn on the lamp. To turn off,
release it. The lamp goes out approximately 10 seconds
after releasing the switch trigger.
To keep the lamp off, turn off the lamp status. To turn off
thelampstatus,rstpullandreleasetheswitchtrigger.
And then press the button for one second within 10
seconds.
To turn on the lamp status again, press the button again
similarly.
NOTE:Toconrmthelampstatus,pullthetrigger.
When the lamp lights up by pulling the switch trigger,
the lamp status is ON. When the lamp does not come
on, the lamp status is OFF.
NOTE:Whenthetoolisoverheated,thelightashes
for one minute, and then the LED display goes off. In
this case, cool down the tool before operating again.
NOTE: Use a dry cloth to wipe the dirt off the lens of
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
Reversing switch action
►Fig.6: 1. Reversing switch lever
CAUTION: Always check the direction of
rotation before operation.
CAUTION: Use the reversing switch only after
the tool comes to a complete stop. Changing the
direction of rotation before the tool stops may dam-
age the tool.
CAUTION: When not operating the tool,
always set the reversing switch lever to the neu-
tral position.
This tool has a reversing switch to change the direction
of rotation. Depress the reversing switch lever from the
A side for clockwise rotation or from the B side for coun-
terclockwise rotation.
When the reversing switch lever is in the neutral posi-
tion, the switch trigger cannot be pulled.

8ENGLISH
Changing the impact force
►Fig.7: 1. Hard 2. Soft 3. A mode 4. Changed in three
steps 5. Button
You can change the impact force in three steps: hard,
soft, and A mode.
This allows a tightening suitable to the work.
Every time the button is pressed, the number of blows
changes in three steps.
“A mode (assist mode)” is an easy-to-use mode for
driving screws with good control.
In this mode, the tool drives a screw with low-speed
rotationatrst.Afterthetoolstartstoimpact,therota-
tion speed increases and reaches the maximum speed.
For approximately one minute after releasing the switch
trigger, the impact force can be changed.
Impact force grade displayed
on panel
Maximum blows Purpose Example of application
Hard 3,900 min-1 (/min) Tightening when force and
speed are desired.
Tightening wood screws,
tightening bolts.
Soft 1,600 min-1 (/min) Tightening with less force to
avoid screw thread breakage.
Tightening sash screws, tight-
ening small screws such as M6.
A mode 3,900 min-1 (/min) Tightening screws with better
control.
Tightening long screws.
NOTE: A mode is available only when the tool rotates clockwise. When rotating counterclockwise in A mode, the
impact force and speed are the same as hard mode.
NOTE: When all lamps on the switch panel go out, the tool is turned off to save the battery power. The impact force
grade can be checked by pulling the switch trigger to the extent that the tool does not operate.
NOTE: While pulling the switch trigger, the impact force grade cannot be changed.
ASSEMBLY
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Installing or removing driver bit/
socket bit
Optional accessory
►Fig.8
Use only driver bit/socket bit that has inserting portion
showninthegure.Donotuseanyotherdriverbit/
socket bit.
For tool with shallow driver bit hole
A=12mm
B=9mm
Use only these type of driver
bit. Follow the procedure
1. (Note) Bit-piece is not
necessary.
For tool with deep driver bit hole
A=17mm
B=14mm
To install these types of driver
bits, follow the procedure 1.
A=12mm
B=9mm
To install these types of driver
bits, follow the procedure 2.
(Note) Bit-piece is necessary
for installing the bit.
1. To install the driver bit, pull the sleeve in the direc-
tion of the arrow and insert the driver bit into the
sleeve as far as it will go.
Then release the sleeve to secure the driver bit.
►Fig.9: 1. Driver bit 2. Sleeve
2. To install the driver bit, pull the sleeve in the direc-
tion of the arrow and insert the bit-piece and driver
bit into the sleeve as far as it will go. The bit-piece
should be inserted into the sleeve with its pointed
end facing in. Then release the sleeve to secure
the driver bit.
►Fig.10: 1. Driver bit 2. Bit-piece 3. Sleeve
To remove the driver bit, pull the sleeve in the direction
of the arrow and pull the driver bit out.
NOTE: If the driver bit is not inserted deep enough
into the sleeve, the sleeve will not return to its original
position and the driver bit will not be secured. In this
case, try re-inserting the bit according to the instruc-
tions above.
NOTE: After inserting the driver bit, make sure that it
isrmlysecured.Ifitcomesout,donotuseit.
Installing hook
►Fig.11: 1. Groove 2. Hook 3. Screw
The hook is convenient for temporarily hanging the tool.
This can be installed on either side of the tool. To install
the hook, insert it into a groove in the tool housing on
either side and then secure it with a screw. To remove,
loosen the screw and then take it out.

9ENGLISH
OPERATION
►Fig.12
The proper fastening torque may differ depending upon
the kind or size of the screw/bolt, the material of the
workpiece to be fastened, etc. The relation between fas-
teningtorqueandfasteningtimeisshowninthegures.
Standard bolt
N•m
(kgf•cm)
2
1
2
13
0
100
(1020)
120
(1224)
80
(816)
60
(612)
40
(408)
20
(204)
M12
M14
M10
M12
M14
M10
M8
M8
3
1. Fastening time (second) 2. Fastening torque
3. Proper fastening torque corresponding to each bolt
diameter
High tensile bolt
32
1
N•m
(kgf•cm)
210
80
(816)
60
(612)
40
(408)
20
(204)
3
100
(1020)
120
(1224)
M10
M12
M12
M8
M8
M10
1. Fastening time (second) 2. Fastening torque
3. Proper fastening torque corresponding to each bolt
diameter
Holdthetoolrmlyandplacethepointofthedriverbit
in the screw head. Apply forward pressure to the tool to
the extent that the bit will not slip off the screw and turn
the tool on to start operation.
NOTICE: If you use a spare battery to continue
the operation, rest the tool at least 15 min.
NOTE: Use the proper bit for the head of the screw/
bolt that you wish to use.
NOTE: When fastening M8 or smaller screw, choose
aproperimpactforceandcarefullyadjustpressureon
the switch trigger so that the screw is not damaged.
NOTE: Hold the tool pointed straight at the screw.
NOTE: If the impact force is too strong or you tighten
thescrewforatimelongerthanshowninthegures,
the screw or the point of the driver bit may be over-
stressed, stripped, damaged, etc. Before starting your
job,alwaysperformatestoperationtodeterminethe
proper fastening time for your screw.
The fastening torque is affected by a wide variety of
factors including the following. After fastening, always
check the torque with a torque wrench.
1. When the battery cartridge is discharged almost
completely, voltage will drop and the fastening
torque will be reduced.
2. Driver bit or socket bit
Failure to use the correct size driver bit or socket
bit will cause a reduction in the fastening torque.
3. Bolt
• Eventhoughthetorquecoefcientandthe
class of bolt are the same, the proper fasten-
ing torque will differ according to the diame-
ter of bolt.
• Even though the diameters of bolts are the
same, the proper fastening torque will differ
accordingtothetorquecoefcient,theclass
of bolt and the bolt length.
4. The manner of holding the tool or the material
of driving position to be fastened will affect the
torque.
5. Operating the tool at low speed will cause a reduc-
tion in the fastening torque.
Using holster
Optional accessory
CAUTION: When using the holster, remove a
driver bit/drill bit from the tool.
CAUTION: Turn off the tool and wait until it
comes to a complete stop before placing it in the
holster.
Be sure to close the holster securely with the
holster button so that it holds the tool rmly.
1. Thread a waist belt or similar through holster
holder.
►Fig.13: 1. Holster holder 2. Waist belt
2. Put the tool in the holster and lock it with the hol-
ster button.
►Fig.14
►Fig.15
You can keep two driver bits at the front of the holster.

10 ENGLISH
MAINTENANCE
CAUTION: Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
NOTICE: Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs,anyothermaintenanceoradjustmentshould
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injurytopersons.Onlyuseaccessoryorattachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Driver bits
• Socket bits
• Bit piece
• Holster
• Hook
• Plastic carrying case
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.

11 BAHASA INDONESIA
BAHASA INDONESIA (Petunjuk Asli)
SPESIFIKASI
Model: TD111D
Kapasitas
pengencangan
Sekrup mesin 4 mm - 8 mm
Baut standar 5 mm - 14 mm
Baut mutu tinggi 5 mm - 12 mm
Kecepatan
tanpa beban
Mode hentakan keras 0 - 3.000 min-1
Mode hentakan ringan 0 - 1.300 min-1
Hentakan per
menit
Mode hentakan keras 0 - 3.900 min-1
Mode hentakan ringan 0 - 1.600 min-1
Tegangan terukur D.C. 10,8 V - 12 V maks
Panjangkeseluruhan 135 mm
Kartrid baterai BL1016, BL1021B BL1041B
Berat bersih 0,97 kg 1,1 kg
• Karenakesinambunganprogrampenelitiandanpengembangankami,spesikasiyangdisebutkandisinidapat
berubah tanpa pemberitahuan.
• Spesikasidankartridbateraidapatberbedadarisatunegarakenegaralainnya.
• Berat, dengan kartrid baterai, menurut Prosedur EPTA 01/2003
Simbol
Berikut ini adalah simbol-simbol yang digunakan pada
peralatan ini. Pastikan Anda mengerti makna masing-
masing simbol sebelum menggunakan alat.
Bacapetunjukpenggunaan.
Cd
Ni-MH
Li-ion
Hanya untuk negara-negara UE
Jangan membuang peralatan listrik atau
paket baterai bersama-sama dengan
bahan limbah rumah tangga!
DenganmemerhatikanPetunjukEropa,
tentang Limbah Peralatan Listrik dan
Elektronik serta Baterai dan Akumulator
serta Limbah Baterai dan Akumulator dan
pelaksanaannya sesuai dengan ketentuan
hukum nasional, peralatan listrik dan
baterai dan paket baterai yang telah habis
umur pakainya harus dikumpulkan secara
terpisah dan dikembalikan ke fasilitas daur
ulang yang kompatibel secara lingkungan.
Penggunaan
Mesin ini digunakan untuk memasang sekrup pada
kayu, logam dan plastik.
PERINGATAN
KESELAMATAN
Peringatan keselamatan umum
mesin listrik
PERINGATAN: Bacalah semua peringatan
keselamatan dan semua petunjuk. Kelalaian
mematuhiperingatandanpetunjukdapat
menyebabkan sengatan listrik, kebakaran dan/atau
cedera serius.
Simpanlah semua peringatan
dan petunjuk untuk acuan di
masa depan.
Istilah “mesin listrik” dalam semua peringatan mengacu
padamesinlistrikyangdijalankandengansumberlistrik
jala-jala(berkabel)ataubaterai(tanpakabel).
Keselamatan tempat kerja
1. Jaga tempat kerja selalu bersih dan
berpenerangan cukup.Tempatkerjayang
berantakan dan gelap mengundang kecelakaan.
2. Jangan gunakan mesin listrik dalam
lingkungan yang mudah meledak, misalnya
jika ada cairan, gas, atau debu yang mudah
menyala. Mesin listrik menimbulkan bunga api
yang dapat menyalakan debu atau uap tersebut.
3. Jauhkan anak-anak dan orang lain saat
menggunakan mesin listrik. Bila perhatian
terpecah, anda dapat kehilangan kendali.
Keamanan Kelistrikan
1. Steker mesin listrik harus cocok dengan
stopkontak. Jangan sekali-kali mengubah

12 BAHASA INDONESIA
steker dengan cara apa pun. Jangan
menggunakan steker adaptor dengan mesin
listrik terbumi (dibumikan). Steker yang
tidak diubah dan stopkontak yang cocok akan
mengurangi risiko sengatan listrik.
2. Hindari sentuhan tubuh dengan permukaan
terbumi atau yang dibumikan seperti pipa,
radiator, kompor, dan kulkas. Risiko sengatan
listrikbertambahjikatubuhAndaterbumikanatau
dibumikan.
3. Jangan membiarkan mesin listrik kehujanan
atau kebasahan. Air yang masuk ke dalam mesin
listrik akan meningkatkan risiko sengatan listrik.
4. Jangan menyalahgunakan kabel. Jangan
sekali-kali menggunakan kabel untuk
membawa, menarik, atau mencabut mesin
listrik dari stopkontak. Jauhkan kabel dari
panas, minyak, tepian tajam, atau bagian
yang bergerak. Kabel yang rusak atau kusut
memperbesar risiko sengatan listrik.
5. Bila menggunakan mesin listrik di luar
ruangan, gunakan kabel ekstensi yang
sesuai untuk penggunaan di luar ruangan.
Penggunaan kabel yang sesuai untuk
penggunaan luar ruangan mengurangi risiko
sengatan listrik.
6. Jika mengoperasikan mesin listrik di lokasi
lembap tidak terhindarkan, gunakan pasokan
daya yang dilindungi peranti imbasan arus
(residual current device - RCD). Penggunaan
RCD mengurangi risiko sengatan listrik.
Keselamatan Diri
1. Jaga kewaspadaan, perhatikan pekerjaan Anda
dan gunakan akal sehat bila menggunakan
mesin listrik. Jangan menggunakan mesin
listrik saat Anda lelah atau di bawah pengaruh
obat bius, alkohol, atau obat.Sekejapsaja
lalai saat menggunakan mesin listrik dapat
menyebabkan cedera badan serius.
2. Gunakan alat pelindung diri. Selalu gunakan
pelindung mata. Peralatan pelindung seperti
masker debu, sepatu pengaman anti-selip, helm
pengaman, atau pelindung telinga yang digunakan
untuk kondisi yang sesuai akan mengurangi risiko
cedera badan.
3. Cegah penyalaan yang tidak disengaja.
Pastikan bahwa sakelar berada dalam posisi
mati (off) sebelum menghubungkan mesin
ke sumber daya dan/atau paket baterai, atau
mengangkat atau membawanya. Membawa
mesinlistrikdenganjariAndapadasakelarnya
atau mengalirkan listrik pada mesin listrik
yang sakelarnya hidup (on) akan mengundang
kecelakaan.
4. Lepaskan kunci-kunci penyetel sebelum
menghidupkan mesin listrik. Kunci-kunci yang
masih terpasang pada bagian mesin listrik yang
berputar dapat menyebabkan cedera.
5. Jangan meraih terlalu jauh. Jagalah pijakan
dan keseimbangan sepanjang waktu. Hal ini
memungkinkan kendali yang lebih baik atas mesin
listrik dalam situasi yang tidak diharapkan.
6. Kenakan pakaian dengan baik. Jangan
memakai pakaian yang kedodoran atau
perhiasan. Jaga jarak antara rambut, pakaian,
dan sarung tangan Anda dengan bagian mesin
yang bergerak. Pakaian kedodoran, perhiasan,
ataurambutpanjangdapattersangkutpada
bagian yang bergerak.
7. Jika tersedia fasilitas untuk menghisap dan
mengumpulkan debu, pastikan fasilitas
tersebut terhubung listrik dan digunakan
dengan baik. Penggunaan pembersih debu dapat
mengurangi bahaya yang terkait dengan debu.
Penggunaan dan pemeliharaan mesin listrik
1. Jangan memaksa mesin listrik. Gunakan
mesin listrik yang tepat untuk keperluan
Anda. Mesin listrik yang tepat akan menuntaskan
pekerjaandenganlebihbaikdanamanpada
kecepatan sesuai rancangannya.
2. Jangan gunakan mesin listrik jika sakelar
tidak dapat menyalakan dan mematikannya.
Mesin listrik yang tidak dapat dikendalikan
dengan sakelarnya adalah berbahaya dan harus
diperbaiki.
3. Cabut steker dari sumber listrik dan/atau paket
baterai dari mesin listrik sebelum melakukan
penyetelan, penggantian aksesori, atau
menyimpan mesin listrik. Langkah keselamatan
preventif tersebut mengurangi risiko hidupnya
mesinsecarataksengaja.
4. Simpan mesin listrik jauh dari jangkauan anak-
anak dan jangan biarkan orang yang tidak
paham mengenai mesin listrik tersebut atau
petunjuk ini menggunakan mesin listrik. Mesin
listrik sangat berbahaya di tangan pengguna yang
tak terlatih.
5. Rawatlah mesin listrik. Periksa apakah ada
bagian bergerak yang tidak lurus atau macet,
bagian yang pecah dan kondisi lain yang dapat
memengaruhi penggunaan mesin listrik. Jika
rusak, perbaiki dahulu mesin listrik sebelum
digunakan. Banyak kecelakaan disebabkan oleh
kurangnya pemeliharaan mesin listrik.
6. Jaga agar mesin pemotong tetap tajam dan
bersih. Mesin pemotong yang terawat baik
denganmatapemotongyangtajamtidakmudah
macet dan lebih mudah dikendalikan.
7. Gunakan mesin listrik, aksesori, dan mata
mesin, dll. sesuai dengan petunjuk ini, dengan
memperhitungkan kondisi kerja dan jenis
pekerjaan yang dilakukan. Penggunaan mesin
listrik untuk penggunaan yang lain dari peruntukan
dapat menimbulkan situasi berbahaya.
Penggunaan dan pemeliharaan mesin bertenaga
baterai
1. Isi ulang baterai hanya dengan pengisi daya
yang ditentukan oleh pabrikan. Pengisi daya
yangcocokuntuksatujenispaketbateraidapat
menimbulkan risiko kebakaran ketika digunakan
untuk paket baterai yang lain.
2. Gunakan mesin listrik hanya dengan
paket baterai yang telah ditentukan secara
khusus. Penggunaan paket baterai lain dapat
menimbulkan risiko cedera dan kebakaran.
3. Ketika paket baterai tidak digunakan, jauhkan
dari benda logam lain, seperti penjepit
kertas, uang logam, kunci, paku, sekrup
atau benda logam kecil lainnya, yang dapat
menghubungkan satu terminal ke terminal

13 BAHASA INDONESIA
lain. Hubungan singkat terminal baterai dapat
menyebabkan luka bakar atau kebakaran.
4. Pemakaian yang salah, dapat menyebabkan
keluarnya cairan dari baterai; hindari kontak.
Jika terjadi kontak secara tidak sengaja, bilas
dengan air. Jika cairan mengenai mata, cari
bantuan medis. Cairan yang keluar dari baterai
bisa menyebabkan iritasi atau luka bakar.
Servis
1. Berikan mesin listrik untuk diperbaiki hanya
kepada oleh teknisi yang berkualikasi dengan
menggunakan hanya suku cadang pengganti
yang serupa.Haliniakanmenjaminterjaganya
keamanan mesin listrik.
2. Patuhi petunjuk pelumasan dan penggantian
aksesori.
3. Jagalah agar gagang kering, bersih, dan bebas
dari minyak dan gemuk.
Peringatan keselamatan obeng
ketok listrik tanpa kabel
1. Pegang mesin listrik pada permukaan
genggam yang terisolasi saat melakukan
pekerjaan bila pengencang mungkin
bersentuhan dengan kawat tersembunyi.
Pengencang yang menyentuh kawat “hidup” dapat
menyebabkan bagian logam pada mesin teraliri
arus listrik dan menyengat pengguna.
2. Selalu pastikan Anda memiliki pijakan kuat.
Pastikan tidak ada orang di bawah Anda ketika
menggunakan mesin di lokasi tinggi.
3. Pegang mesin kuat-kuat.
4. Kenakan pelindung telinga.
5. Jangan menyentuh mata mesin atau benda
kerja segera setelah pengoperasian. Suhunya
mungkin masih sangat panas dan dapat
membakar kulit Anda.
6. Jauhkan tangan dari bagian yang berputar.
SIMPAN PETUNJUK INI.
PERINGATAN: JANGAN biarkan kenyamanan
atau terbiasanya Anda dengan produk (karena
penggunaan berulang) mengurangi kepatuhan
yang ketat terhadap aturan keselamatan untuk
produk yang terkait.
PENYALAHGUNAAN atau kelalaian mematuhi
kaidah keselamatan yang tertera dalam petunjuk
ini dapat menyebabkan cedera badan serius.
Petunjuk keselamatan penting untuk
kartrid baterai
1. Sebelum menggunakan kartrid baterai,
bacalah semua petunjuk dan penandaan pada
(1) pengisi daya baterai, (2) baterai, dan (3)
produk yang menggunakan baterai.
2. Jangan membongkar kartrid baterai.
3. Jika waktu beroperasinya menjadi sangat
singkat, segera hentikan penggunaan. Hal
tersebut dapat menimbulkan risiko panas
berlebih, kemungkinan mengalami luka bakar
atau bahkan terjadi ledakan.
4. Jika elektrolit mengenai mata Anda, basuh
dengan air bersih dan segera cari pertolongan
medis. Hal tersebut dapat mengakibatkan
hilangnya kemampuan penglihatan Anda.
5. Jangan menghubungkan terminal kartrid
baterai:
(1) Jangan menyentuhkan terminal dengan
bahan penghantar listrik apa pun.
(2) Hindari menyimpan kartrid baterai pada
wadah yang berisi benda logam lain
seperti paku, uang logam, dsb.
(3) Jangan membiarkan baterai terkena air
atau kehujanan.
Hubungan singkat baterai dapat menyebabkan
aliran arus listrik yang besar, panas berlebih,
kemungkinan mengalami luka bakar dan
bahkan kerusakan pada baterai.
6. Jangan menyimpan mesin dan kartrid baterai
pada lokasi dengan suhu yang bisa mencapai
atau melebihi 50 °C.
7. Jangan membuang kartrid baterai di tempat
pembakaran sampah walaupun benar-benar
rusak atau tidak bisa digunakan sama sekali.
Kartrid baterai bisa meledak jika terbakar.
8. Berhati-hatilah jangan sampai baterai jatuh
atau terbentur.
9. Jangan menggunakan baterai yang rusak.
10. Baterai litium-ion yang disertakan sesuai
dengan persyaratan Perundangan Makanan
Berbahaya.
Harus ada pengawasan untuk pengangkutan
komersial misalnya oleh pihak ketiga, ekspeditor,
persyaratan khusus terhadap pengemasan dan
pelabelan.
Diperlukan adanya konsultasi dengan ahli
mengenai material berbahaya untuk persiapan
barang yang akan dikirimkan. Perhatikan pula
peraturan nasional yang lebih terperinci yang
mungkin ada.
Beri perekat atau tutupi bagian yang terbuka
dan kemasi baterai dengan cara yang tidak akan
menimbulkan pergeseran dalam pengemasan.
11. Patuhi peraturan setempat yang berkaitan
dengan pembuangan baterai.
SIMPAN PETUNJUK INI.
PERHATIAN: Gunakan baterai asli Makita.
Penggunaan baterai Makita yang tidak asli, atau
baterai yang sudah diubah, akan mengakibatkan
baterai mudah terbakar, cedera dan kerusakan. Akan
menghilangkan garansi Makita pada pengisi daya
dan alat Makita.
Tip untuk menjaga agar umur
pemakaian baterai maksimum
1. Isi ulang kartrid baterai sebelum habis sama
sekali. Selalu hentikan penggunaan mesin dan
ganti kartrid baterai jika Anda melihat bahwa
mesin kurang tenaga.
2. Jangan pernah mengisi ulang kartrid baterai
yang sudah diisi penuh. Pengisian ulang yang
berlebih memperpendek umur pemakaian
baterai.
3. Isi ulang kartrid baterai pada suhu ruangan

14 BAHASA INDONESIA
10 °C - 40 °C. Biarkan kartrid baterai yang
panas menjadi dingin terlebih dahulu sebelum
diisi ulang.
DESKRIPSI FUNGSI
PERHATIAN: Selalu pastikan bahwa mesin
dimatikan dan kartrid baterai dilepas sebelum
menyetel atau memeriksa kerja mesin.
Memasang atau melepas baterai
PERHATIAN: Selalu matikan mesin sebelum
memasang atau melepas kartrid baterai.
PERHATIAN: Pegang mesin dan kartrid
baterai kuat-kuat saat memasang atau melepas
kartrid baterai. Kelalaian untuk memegang mesin
dan kartrid baterai kuat-kuat bisa menyebabkan
keduanya tergelincir dari tangan Anda dan
mengakibatkan kerusakan pada mesin dan kartrid
baterai dan cedera diri.
►Gbr.1: 1. Indikator berwarna merah 2. Tombol
3. Kartrid baterai
Untuk melepas kartrid baterai, geser dari mesin sambil
menggeser tombol pada bagian depan kartrid.
Untukmemasangkartridbaterai,sejajarkanlidah
kartrid baterai dengan alur pada rumah dan masukkan
ke dalam tempatnya. Masukkan seluruhnya sampai
terkunci pada tempatnya dan terdengar bunyi klik kecil.
Jika Anda bisa melihat indikator berwarna merah pada
sisi atas tombol, berarti tidak terkunci sepenuhnya.
PERHATIAN: Selalu pasang kartrid baterai
sepenuhnya sampai indikator berwarna merah
tidak terlihat. Jika tidak, bisa terlepas dari mesin
secaratidaksengaja,menyebabkanlukapadaAnda
atau orang di sekitar Anda.
PERHATIAN: Jangan memasang kartrid
baterai secara paksa. Jika kartrid tidak bergeser
dengan mudah, berarti tidak dimasukkan dengan
benar.
Sistem perlindungan baterai
Mesin ini dilengkapi dengan sistem perlindungan
baterai. Sistem ini memutus daya ke motor secara
otomatisuntukmemperpanjangumurpemakaian
baterai.
Mesin akan berhenti saat penggunaan saat mesin dan/
atau baterai berada dalam salah satu kondisi berikut ini:
Kelebihan beban:
Mesindijalankandengancarayangmenyebabkannya
menarik arus tinggi yang tidak normal.
Untuksituasiini,matikanmesindanhentikanpekerjaan
yang menyebabkan mesin mengalami kelebihan beban.
Kemudian, nyalakan mesin untuk kembali memulai
pekerjaan.
Jika mesin tidak menyala, baterai mengalami kelebihan
panas. Untuk situasi ini, biarkan baterai mendingin
sebelum kembali menyalakan mesin.
Tegangan baterai rendah:
Kapasitas baterai yang tersisa terlalu rendah dan mesin
tidak akan beroperasi. Jika Anda menyalakan mesin,
motor akan menyala lagi tetapi segera berhenti. Untuk
situasi ini, lepas dan isi ulang baterai.
Mengindikasikan kapasitas baterai
yang tersisa
Hanya untuk kartrid baterai dengan huruf “B” pada
akhir nomor model
►Gbr.2: 1. Lampu indikator 2. Tombol pemeriksaan
Tekan tombol pemeriksaan pada kartrid baterai untuk
melihat kapasitas baterai yang tersisa. Lampu indikator
menyala selama beberapa detik.
Lampu indikator Kapasitas yang
tersisa
Menyala Mati
75% hingga 100%
50% hingga 75%
25% hingga 50%
0% hingga 25%
CATATAN: Tergantung kondisi penggunaan dan suhu
lingkungannya,penunjukkanmungkinsajasedikit
berbeda dari kapasitas sebenarnya.
Kerja sakelar
►Gbr.3: 1. Picu sakelar
PERHATIAN: Sebelum memasukkan
kartrid baterai pada mesin, pastikan picu saklar
berfungsi dengan baik dan kembali ke posisi
“OFF” saat dilepas.
Untukmenjalankanmesin,cukuptarikpicusaklarnya.
Kecepatan mesin meningkat dengan menambah
tekanan pada picu saklar. Lepaskan picu sakelar untuk
berhenti.
CATATAN:Mesinakanberhentisecaraotomatisjika
Anda tetap menarik picu sakelar selama kira-kira 6
menit.
Menyalakan lampu depan
PERHATIAN: Jangan melihat lampu atau
sumber cahaya secara langsung.
►Gbr.4: 1. Lampu
►Gbr.5: 1. Tombol
Tarik pelatuk sakelar untuk menyalakan lampu. Untuk
mematikan, lepas sakelarnya. Lampu akan padam kira-
kira 10 detik setelah melepas pelatuk sakelar.
Untuk memastikan agar lampu tetap padam, matikan
status lampu. Untuk mematikan status lampu, pertama-
tama tarik dan lepaskan pelatuk sakelar. Kemudian,

15 BAHASA INDONESIA
tekan tombol selamasatudetikdalamjangkawaktu
10 detik.
Untuk menyalakan kembali status lampu, tekan kembali
tombol tersebut dengan cara yang sama.
CATATAN:Untukmengonrmasistatuslampu,tarik
picunya. Ketika lampu menyala dengan menarik picu
saklar, status lampu dalam kondisi ON. Ketika lampu
tidak menyala, status lampu dalam kondisi OFF.
CATATAN: Saat mesin mengalami kelebihan panas,
lampu berkedip selama satu menit, dan kemudian
tampilan LED akan padam. Untuk kasus ini, biarkan
bateraimenjadidinginsebelumdigunakanlagi.
CATATAN: Gunakan kain kering untuk mengelap
kotorandarilensalampu.Hati-hatijangansampai
menggores lensa lampu, atau hal tersebut dapat
menurunkan tingkat penerangannya.
Kerja saklar pembalik arah
►Gbr.6: 1. Tuas saklar pembalik arah
PERHATIAN: Selalu periksa arah putaran
sebelum penggunaan.
PERHATIAN: Gunakan saklar pembalik
arah hanya setelah mesin benar-benar berhenti.
Mengubah arah putaran sebelum mesin berhenti
dapat merusak mesin.
PERHATIAN: Saat mesin tidak digunakan,
selalu posisikan tuas saklar pembalik arah pada
posisi netral.
Mesin ini memiliki saklar pembalik arah untuk
mengubah arah putaran. Tekan tuas saklar pembalik
arahdarisisiAuntukputaransearahjarumjamatau
darisisiBuntukputaranberlawananarahjarumjam.
Ketika tuas saklar pembalik arah pada posisi netral,
picu saklar tidak bisa ditarik.
Mengubah kekuatan hentakan
►Gbr.7: 1. Keras 2. Lunak 3. Mode A 4. Diubah
dalam tiga tahap 5. Tombol
Anda dapat mengubah kekuatan hentakan dalam tiga
tahap: keras, lunak, dan mode A.
Hal ini membuat pemasangan dapat disesuaikan
denganpengerjaan.
Setiapkalitombolditekan,jumlahhembusanberubah
dalam tiga tahap.
“Mode A (mode bantuan)” adalah mode yang mudah
digunakan untuk menggerakkan sekrup dengan kontrol
yang baik.
Pada mode ini, mula-mula mesin akan menggerakkan
sekrup dengan kecepatan putar rendah. Setelah mesin
mulai menghentak, kecepatan putaran akan bertambah
dan akan mencapai kecepatan maksimal.
Selama kira-kira satu menit setelah melepas picu
saklar, kekuatan hentakan bisa diubah.
Tingkat kekuatan hentakan
ditampilkan pada panel
Hembusan maksimum Kegunaan Contoh penerapan
Keras 3.900 min-1 (/min) Pengencangan pada kekuatan
dan kecepatan yang diinginkan.
Sekrup kayu pengencangan,
baut pengencangan.
Ringan 1.600 min-1 (/min) Untuk melakukan pemasangan
dengan kekuatan lebih rendah
untuk menghindari kerusakan
pada ulir sekrup.
Untuk memasang sekrup
ikat, memasang sekrup kecil
seperti M6.
Mode A 3.900 min-1 (/min) Untuk memasang sekrup
dengan kontrol lebih baik.
Untuk memasang sekrup
panjang.
CATATAN:ModeAhanyatersediaketikaalatberputarsearahjarumjam.Ketikaberputarberlawanandengan
arahjarumjampadamodeA,kekuatanhentakandankecepatanakansamadenganmodekeras.
CATATAN: Saat semua lampu pada panel sakelar mati, mesin akan mati untuk menghemat daya baterai. Tingkat
kekuatanhentakandapatdiperiksadenganmenarikpelatuksakelarhinggamesintidakbekerja.
CATATAN: Selama pelatuk sakelar ditarik, tingkat kekuatan hentakan tidak dapat diubah.
PERAKITAN
PERHATIAN: Selalu pastikan bahwa mesin
dimatikan dan kartrid baterai dilepas sebelum
melakukan pekerjaan apa pun pada mesin.
Memasang atau melepas mata
obeng/mata soket
Pilihan Aksesori
►Gbr.8
Gunakan hanya mata obeng/mata soket yang memiliki
ujungpencekamansepertiditunjukkanpadagambar.

16 BAHASA INDONESIA
Jangan gunakan mata obeng/mata soket lain.
Untuk mesin dengan lubang mata obeng yang
dangkal
A=12mm
B=9mm
Gunakan hanya mata obeng
jenisini.Ikutiprosedur1.
(Catatan) Tidak diperlukan
ganjalmatamesin.
Untuk mesin dengan lubang mata obeng yang
dalam
A=17mm
B=14mm
Untuk memasang mata obeng
jenisini,ikutiprosedur1.
A=12mm
B=9mm
Untuk memasang mata obeng
jenisini,ikutiprosedur2.
(Catatan)Diperlukanganjal
mata mesin untuk memasang
mata mesin tersebut.
1. Untuk memasang mata obeng, tarik selongsong
sesuai arah panah dan masukkan mata obeng ke
dalamselongsongsejauhmungkin.
Kemudian lepaskan selongsong untuk
mengencangkan mata obeng.
►Gbr.9: 1. Mata obeng 2. Selongsong
2. Untuk memasang mata mesin, tarik selongsong
sesuaiarahpanahdanmasukkanganjalmata
mesin dan mata obeng ke dalam selongsong
sejauhmungkin.Ganjalmatamesinharus
dimasukkankedalamselongsongdenganujung
lancipnya menghadap ke dalam. Kemudian lepas
selongsong untuk mengencangkan mata obeng.
►Gbr.10: 1. Mata obeng 2.Ganjalmatamesin
3. Selongsong
Untuk melepas mata obeng, tarik selongsong sesuai
arah panah dan cabut mata mesin.
CATATAN: Jika mata obeng tidak dimasukkan penuh
ke dalam selongsong, selongsong tidak akan kembali
pada posisi semula dan mata mesin tidak terpasang.
Untuk kasus ini, coba masukkan kembali mata mesin
sesuaidenganpetunjukdiatas.
CATATAN: Setelah memasukkan mata obeng,
pastikanterpasangdengankuat.Jikamenonjol
keluar,jangandigunakan.
Memasang kait
►Gbr.11: 1. Alur 2. Kait 3. Sekrup
Kait bisa digunakan untuk menggantung mesin
sementara. Bisa dipasang pada salah satu sisi mesin.
Untuk memasang kait, masukkan ke dalam alur pada
rumah mesin pada salah satu sisinya dan kemudian
kencangkan dengan sekrup. Untuk melepasnya,
kendurkan sekrup dan kemudian tarik keluar.
PENGGUNAAN
►Gbr.12
Torsi pengencangan yang tepat bisa berbeda
tergantung pada macam atau ukuran sekrup/baut,
bahanbendakerjayangakandikencangkan,dsb.
Hubungan antara torsi pengencangan dan waktu
pengencanganditunjukkanpadagambar.
Baut standar
N•m
(kgf•cm)
2
1
2
13
0
100
(1020)
120
(1224)
80
(816)
60
(612)
40
(408)
20
(204)
M12
M14
M10
M12
M14
M10
M8
M8
3
1. Waktu pengencangan (detik) 2. Torsi pengencangan
3. Torsi pengencangan yang tepat sesuai dengan setiap
diameter baut
Baut mutu tinggi
32
1
N•m
(kgf•cm)
210
80
(816)
60
(612)
40
(408)
20
(204)
3
100
(1020)
120
(1224)
M10
M12
M12
M8
M8
M10
1. Waktu pengencangan (detik) 2. Torsi pengencangan
3. Torsi pengencangan yang tepat sesuai dengan setiap
diameter baut

17 BAHASA INDONESIA
Pegangmesinkuat-kuatdanposisikanujungmata
obengpadakepalasekrup.Tekanmajumesinsampai
titik di mana mata obeng tidak tergelincir dan nyalakan
mesin untuk memulai penggunaan.
PEMBERITAHUAN: Jika Anda menggunakan
baterai terpisah untuk melanjutkan pengerjaan,
istirahatkan mesin sedikitnya selama 15 menit.
CATATAN: Gunakan mata mesin yang sesuai untuk
kepala sekrup/baut yang ingin Anda gunakan.
CATATAN: Ketika mengencangkan sekrup M8 atau
yang lebih kecil, pilih kekuatan hentakan yang tepat,
dan sesuaikan tekanan pada picu saklar dengan
seksama sehingga tidak merusak sekrup.
CATATAN: Tahan mesin pada posisi tegak lurus
terhadap sekrup.
CATATAN: Jika kekuatan hentakan terlalu kuat atau
Anda mengencangkan sekrup untuk waktu yang lebih
lamadariyangditunjukkanpadagambar,sekrup
atauujungmataobengbisamengalamikelebihan
tekanan, terlepas, rusak, dsb. Sebelum memulai
pekerjaanAnda,selalulakukanuji-cobauntuk
menentukan waktu yang sesuai bagi sekrup Anda.
Torsi pengencangan dipengaruhi oleh berbagai
macam faktor termasuk hal-hal berikut ini. Setelah
pengencangan, selalu periksa torsi dengan kunci torsi.
1. Ketika kartrid baterai hampir benar-benar habis,
tegangan akan turun dan torsi pengencangan
akan berkurang.
2. Mata obeng atau mata soket
Kesalahan penggunaan mata obeng atau
mata soket dengan ukuran yang tepat akan
menyebabkan penurunan torsi pengencangan.
3. Baut
• Walaupunkoesientorsidankelasbautnya
sama, torsi pengencangan yang tepat akan
berbeda sesuai dengan diameter baut.
• Walaupun diameter bautnya sama, torsi
pengencangan yang tepat akan berbeda
sesuaidengankoesientorsi,kelasbautdan
panjangbaut.
4. Sikap ketika memegang mesin atau posisi bahan
yang akan dipasang sekrup akan mempengaruhi
torsi.
5. Menggunakan mesin pada kecepatan
rendah akan menyebabkan penurunan torsi
pengencangan.
Menggunakan sarung
Pilihan Aksesori
PERHATIAN: Ketika menggunakan sarung,
lepaskan mata obeng/mata bor dari mesin.
PERHATIAN: Matikan mesin dan tunggu
sampai berhenti penuh sebelum memasukkannya
ke dalam sarung.
Pastikan untuk menutup sarung dengan kancing
sarung sehingga dapat menahan mesin dengan
kuat.
1. Pasangpadaikatpinggangatausejenisnyalewat
pemegang sarung.
►Gbr.13: 1. Pemegang sarung 2. Ikat pinggang
2. Masukkan mesin ke dalam sarung dan kunci
dengan kancing sarung.
►Gbr.14
►Gbr.15
Anda dapat menyimpan dua mata obeng di bagian
depan sarung.
PERAWATAN
PERHATIAN: Selalu pastikan bahwa mesin
dimatikan dan kartrid baterai dilepas sebelum
melakukan pemeriksaan atau perawatan.
PEMBERITAHUAN: Jangan sekali-kali
menggunakan bensin, tiner, alkohol, atau bahan
sejenisnya. Penggunaan bahan demikian dapat
menyebabkan perubahan warna, perubahan
bentuk atau timbulnya retakan.
UntukmenjagaKEAMANANdanKEANDALANmesin,
perbaikan, perawatan atau penyetelan lainnya harus
dilakukan oleh Pusat Layanan Resmi atau Pabrik
Makita; selalu gunakan suku cadang pengganti buatan
Makita.
AKSESORI PILIHAN
PERHATIAN: Dianjurkan untuk menggunakan
aksesori atau perangkat tambahan ini dengan
mesin Makita Anda yang ditentukan dalam
petunjuk ini. Penggunaan aksesori atau perangkat
tambahan lain bisa menyebabkan risiko cedera pada
manusia. Hanya gunakan aksesori atau perangkat
tambahan sesuai dengan peruntukkannya.
Jika Anda memerlukan bantuan lebih rinci berkenaan
dengan aksesori ini, tanyakan pada Pusat Layanan
Makita terdekat.
• Mata obeng
• Mata soket
• Ganjalmatamesin
• Sarung
• Kait
• Tasjinjingplastik
• Baterai dan pengisi daya asli buatan Makita
CATATAN: Beberapa item dalam daftar tersebut
mungkin sudah termasuk dalam paket mesin sebagai
aksesori standar. Hal tersebut dapat berbeda dari
satu negara ke negara lainnya.

18 TIẾNG VIỆT
TIẾNG VIỆT (Hướng dẫn gốc)
THÔNG SỐ KỸ THUẬT
Kiểu máy: TD111D
Khảnăng
vặnxiết
Vít máy 4 mm - 8 mm
Bu-lôngthường 5 mm - 14 mm
Bu-lôngcườngđộcao 5 mm - 12 mm
Tốcđộ
khôngtải
Chếđộbắtvítmạnh 0 - 3.000 min-1
Chếđộbắtvítnhẹ 0 - 1.300 min-1
Sốlầnvặn
mỗiphút
Chếđộbắtvítmạnh 0 - 3.900 min-1
Chếđộbắtvítnhẹ 0 - 1.600 min-1
Điệnápđịnhmức 10,8Vmộtchiều-tốiđa12V
Chiềudàitổngthể 135 mm
Hộppin BL1016, BL1021B BL1041B
Trọnglượngtịnh 0,97 kg 1,1 kg
• Dochươngtrìnhnghiêncứuvàpháttriểnliêntụccủachúngtôinêncácthôngsốkỹthuậttrongđâycóthểthay
đổimàkhôngcầnthôngbáotrước.
• Cácthôngsốkỹthuậtvàhộppincóthểthayđổitùytheotừngquốcgia.
• TrọnglượngkèmtheohộppintheoQuytrìnhEPTA01/2003
Ký hiệu
Phầndướiđâychobiếtcáckýhiệuđượcdùngchothiết
bị.Đảmbảorằngbạnhiểurõýnghĩacủacáckýhiệu
nàytrướckhisửdụng.
Đọctàiliệuhướngdẫn.
Cd
Ni-MH
Li-ion
ChỉdànhchocácquốcgiaEU
Khôngthảibỏthiếtbịđiệnhoặcbộpin
cùngvớicácchấtthảisinhhoạt!
ĐểtuânthủcácChỉthịcủaChâuÂuvề
thiếtbịđiệnvàđiệntửthảibỏ,vàvềpin
vàắcquyvàpinvàắcquythảibỏ,vàthi
hànhnhữngchỉthịnàyphùhợpvớiluậtlệ
quốcgia,cácthiếtbịđiệntửvàpinvà(các)
bộpinkhôngcònsửdụngđượcnữaphải
đượcthunhặtriêngvàđưatrởlạimộtcơ
sởtáichếtươngthíchvớimôitrường.
Mục đích sử dụng
Dụngcụnàydùngđểbắtvítvàogỗ,kimloạivànhựa.
CẢNH BÁO AN TOÀN
Cảnh báo an toàn chung dành cho
dụng cụ máy
CẢNH BÁO: Đọc tất cả các cảnh báo an toàn
và tất cả hướng dẫn. Việckhôngtuântheocáccảnh
báovàhướngdẫncóthểdẫnđếnđiệngiật,hỏahoạn
và/hoặcthươngtíchnghiêmtrọng.
Lưu giữ tất cả cảnh báo và
hướng dẫn để tham khảo sau
này.
Thuậtngữ“dụngcụmáy”trongcáccảnhbáođềcập
đếndụngcụmáy(códây)đượcvậnhànhbằngnguồn
điệnchínhhoặcdụngcụmáy(khôngdây)đượcvận
hànhbằngpincủabạn.
An toàn tại nơi làm việc
1. Giữ nơi làm việc sạch sẽ và có đủ ánh sáng.
Nơilàmviệcbừabộnhoặctốithườngdễgâyra
tainạn.
2. Không vận hành dụng cụ máy trong môi
trường cháy nổ, ví dụ như môi trường có sự
hiện diện của các chất lỏng, khí hoặc bụi dễ
cháy.Cácdụngcụmáytạotialửađiệncóthểlàm
bụihoặckhíbốccháy.
3. Giữ trẻ em và người ngoài tránh xa nơi làm
việc khi đang vận hành dụng cụ máy.Sựxao
lãngcóthểkhiếnbạnmấtkhảnăngkiểmsoát.
An toàn về Điện
1. Phích cắm của dụng cụ máy phải khớp với
ổ cắm. Không được sửa đổi phích cắm theo
bất kỳ cách nào. Không sử dụng bất kỳ phích
chuyển đổi nào với các dụng cụ máy được nối
đất (tiếp đất). Cácphíchcắmcònnguyênvẹnvà
ổcắmphùhợpsẽgiảmnguycơđiệngiật.
2. Tránh để cơ thể tiếp xúc với các bề mặt nối đất
hoặc tiếp đất như đường ống, bộ tản nhiệt,
bếp ga và tủ lạnh.Nguycơbịđiệngiậtsẽtăng
lênnếucơthểbạnđượcnốiđấthoặctiếpđất.
3. Không để dụng cụ máy tiếp xúc với mưa hoặc
trong điều kiện ẩm ướt.Nướclọtvàodụngcụ
máysẽlàmtăngnguycơđiệngiật.
4. Không lạm dụng dây điện. Không được phép
sử dụng dây để mang, kéo hoặc tháo phích
cắm dụng cụ máy. Giữ dây tránh xa nguồn

19 TIẾNG VIỆT
nhiệt, dầu, các mép sắc hoặc các bộ phận
chuyển động.Dâybịhỏnghoặcbịrốisẽlàmtăng
nguycơđiệngiật.
5. Khi vận hành dụng cụ máy ngoài trời, hãy sử
dụng dây kéo dài phù hợp cho việc sử dụng
ngoài trời.Việcdùngdâyphùhợpchoviệcsử
dụngngoàitrờisẽgiảmnguycơđiệngiật.
6. Nếu bắt buộc phải vận hành dụng cụ máy ở
nơi ẩm ướt, hãy sử dụng nguồn cấp điện được
bảo vệ bằng thiết bị ngắt dòng điện rò (RCD).
ViệcsửdụngRCDsẽlàmgiảmnguycơđiệngiật.
An toàn Cá nhân
1. Luôn tỉnh táo, quan sát những việc bạn đang
làm và sử dụng những phán đoán theo kinh
nghiệm khi vận hành dụng cụ máy. Không
sử dụng dụng cụ máy khi bạn đang mệt mỏi
hoặc chịu ảnh hưởng của ma túy, rượu hay
thuốc.Chỉmộtkhoảnhkhắckhôngtậptrungkhi
đangvậnhànhdụngcụmáycũngcóthểdẫnđến
thươngtíchcánhânnghiêmtrọng.
2. Sử dụng thiết bị bảo hộ cá nhân. Luôn đeo
thiết bị bảo vệ mắt.Cácthiếtbịbảohộnhưmặt
nạchốngbụi,giàyantoànchốngtrượt,mũbảo
hộhaythiếtbịbảovệthínhgiácđượcsửdụng
trongcácđiềukiệnthíchhợpsẽgiúpgiảmthương
tíchcánhân.
3. Tránh vô tình khởi động dụng cụ máy. Đảm
bảo công tắc ở vị trí off (tắt) trước khi nối
nguồn điện và/hoặc bộ pin, cầm hoặc di
chuyển dụng cụ máy.Việcdichuyểndụngcụ
máykhiđangđặtngóntayởvịtrícôngtắchoặc
cấpđiệnchodụngcụmáyđangbậtthườngdễ
gâyratainạn.
4. Tháo tất cả các khóa hoặc cờ lê điều chỉnh
trước khi bật dụng cụ máy.Việccờlêhoặckhóa
vẫncòngắnvàobộphậnquaycủadụngcụmáy
cóthểdẫnđếnthươngtíchcánhân.
5. Không với quá cao. Luôn giữ thăng bằng tốt
và có chỗ để chân phù hợp.Điềunàychophép
điềukhiểndụngcụmáytốthơntrongnhữngtình
huốngbấtngờ.
6. Ăn mặc phù hợp. Không mặc quần áo rộng
hay đeo đồ trang sức. Giữ tóc, quần áo và
găng tay tránh xa các bộ phận chuyển động.
Quầnáorộng,đồtrangsứchaytócdàicóthể
mắcvàocácbộphậnchuyểnđộng.
7. Nếu các thiết bị được cung cấp để kết nối các
thiết bị thu gom và hút bụi, hãy đảm bảo chúng
được kết nối và sử dụng hợp lý.Việcsửdụng
thiếtbịthugombụicóthểlàmgiảmnhữngmối
nguyhiểmliênquanđếnbụi.
Sử dụng và bảo quản dụng cụ máy
1. Không dùng lực đối với dụng cụ máy. Sử dụng
đúng dụng cụ máy cho công việc của bạn.Sử
dụngđúngdụngcụmáysẽgiúpthựchiệncông
việctốthơnvàantoànhơntheogiátrịđịnhmức
đượcthiếtkếcủadụngcụmáyđó.
2. Không sử dụng dụng cụ máy nếu công tắc
không bật và tắt được dụng cụ máy đó.Mọi
dụngcụmáykhôngthểđiềukhiểnđượcbằng
côngtắcđềurấtnguyhiểmvàphảiđượcsửa
chữa.
3. Rút phích cắm ra khỏi nguồn điện và/hoặc
ngắt kết nối bộ pin khỏi dụng cụ máy trước khi
thực hiện bất kỳ công việc điều chỉnh, thay đổi
phụ tùng hay cất giữ dụng cụ máy nào.Những
biệnphápantoànphòngngừanàysẽgiảmnguy
cơvôtìnhkhởiđộngdụngcụmáy.
4. Cất giữ các dụng cụ máy không sử dụng ngoài
tầm với của trẻ em và không cho bất kỳ người
nào không có hiểu biết về dụng cụ máy hoặc
các hướng dẫn này vận hành dụng cụ máy.
Dụngcụmáysẽrấtnguyhiểmnếuđượcsửdụng
bởinhữngngườidùngchưaquađàotạo.
5. Bảo quản dụng cụ máy. Kiểm tra tình trạng
lệch trục hoặc bó kẹp của các bộ phận chuyển
động, hiện tượng nứt vỡ của các bộ phận và
mọi tình trạng khác mà có thể ảnh hưởng đến
hoạt động của dụng cụ máy. Nếu có hỏng hóc,
hãy sửa chữa dụng cụ máy trước khi sử dụng.
Nhiềutainạnxảyralàdokhôngbảoquảntốt
dụngcụmáy.
6. Luôn giữ cho dụng cụ cắt được sắc bén và
sạch sẽ.Nhữngdụngcụcắtđượcbảoquảntốt
cómépcắtsắcsẽítbịkẹthơnvàdễđiềukhiển
hơn.
7. Sử dụng dụng cụ máy, phụ tùng và đầu dụng
cụ cắt, v.v... theo các hướng dẫn này, có tính
đến điều kiện làm việc và công việc được thực
hiện.Việcsửdụngdụngcụmáychocáccông
việckhácvớicôngviệcdựđịnhcóthểgâynguy
hiểm.
Sử dụng và bảo quản dụng cụ dùng pin
1. Chỉ sạc pin lại với bộ sạc do nhà sản xuất quy
định.Bộsạcphùhợpvớimộtloạibộpinnàycó
thểgâyranguycơhỏahoạnkhiđượcdùngcho
mộtbộpinkhác.
2. Chỉ sử dụng các dụng cụ máy với các bộ pin
được quy định cụ thể.Việcsửdụngbấtcứbộ
pinnàokháccóthểgâyrathươngtíchvàhỏa
hoạn.
3. Khi không sử dụng bộ pin, hãy giữ tránh xa
các đồ vật khác bằng kim loại, chẳng hạn như
kẹp giấy, tiền xu, chìa khóa, đinh, ốc vít hoặc
các vật nhỏ bằng kim loại mà có thể làm nối tắt
các đầu cực pin.Cácđầucựcpinbịđoảnmạch
cóthểgâycháyhoặchỏahoạn.
4. Trong điều kiện sử dụng quá mức, pin có thể
bị chảy nước; hãy tránh tiếp xúc. Nếu vô tình
tiếp xúc với pin bị chảy nước, hãy rửa sạch
bằng nước. Nếu dung dịch từ pin tiếp xúc với
mắt, cần đi khám bác sĩ thêm.Dungdịchchảy
ratừpincóthểgâyrátdahoặcbỏng.
Bảo dưỡng
1. Để nhân viên sửa chữa đủ trình độ bảo dưỡng
dụng cụ máy của bạn và chỉ sử dụng các bộ
phận thay thế đồng nhất.Việcnàysẽđảmbảo
duytrìđượcđộantoàncủadụngcụmáy.
2. Tuân theo hướng dẫn dành cho việc bôi trơn
và thay phụ tùng.
3. Giữ tay cầm khô, sạch, không dính dầu và mỡ.

20 TIẾNG VIỆT
Các cảnh báo an toàn cho máy bắt
vít chạy pin
1. Cầm dụng cụ máy tại bề mặt kẹp cách điện khi
thực hiện một thao tác trong đó bộ phận kẹp
có thể tiếp xúc với dây dẫn điện kín bên dưới.
Bộphậnkẹptiếpxúcvớidâydẫn“cóđiện”cóthể
khiếncácbộphậnkimloạibịhởcủadụngcụmáy
“cóđiện”vàlàmchongườivậnhànhbịđiệngiật.
2. Luôn chắc chắn rằng bạn có chỗ tựa chân
vững chắc.
Đảm bảo rằng không có ai ở bên dưới khi sử
dụng dụng cụ ở những vị trí trên cao.
3. Cầm chắc dụng cụ.
4. Đeo thiết bị bảo vệ tai.
5. Không chạm vào mũi khoan hoặc phôi gia
công ngay sau khi vận hành. Chúng có thể rất
nóng và có thể gây bỏng da.
6. Giữ tay tránh xa các bộ phận quay.
LƯU GIỮ CÁC HƯỚNG DẪN
NÀY.
CẢNH BÁO: KHÔNG vì đã thoải mái hay quen
thuộc với sản phẩm (có được do sử dụng nhiều
lần) mà không tuân thủ nghiêm ngặt các quy định
về an toàn dành cho sản phẩm này.
VIỆC DÙNG SAI hoặc không tuân theo các quy
định về an toàn được nêu trong tài liệu hướng
dẫn này có thể dẫn đến thương tích cá nhân
nghiêm trọng.
Hướng dẫn quan trọng về an toàn
dành cho hộp pin
1. Trước khi sử dụng hộp pin, hãy đọc kỹ tất cả
các hướng dẫn và dấu hiệu cảnh báo trên (1)
bộ sạc pin, (2) pin và (3) sản phẩm sử dụng
pin.
2. Không tháo rời hộp pin.
3. Nếu thời gian vận hành ngắn hơn quá mức,
hãy ngừng vận hành ngay lập tức. Ðiều này có
thể dẫn đến rủi ro quá nhiệt, có thể gây bỏng
và thậm chí là nổ.
4. Nếu chất điện phân rơi vào mắt, hãy rửa sạch
bằng nước sạch và đến cơ sở y tế ngay lập
tức. Chất này có thể khiến bạn giảm thị lực.
5. Không để hộp pin ở tình trạng đoản mạch:
(1) Không chạm vào cực pin bằng vật liệu
dẫn điện.
(2) Tránh cất giữ hộp pin trong hộp có các
vật kim loại khác như đinh, tiền xu, v.v...
(3) Không được để hộp pin tiếp xúc với
nước hoặc mưa.
Ðoản mạch pin có thể gây ra dòng điện lớn,
quá nhiệt, có thể gây bỏng và thậm chí là hỏng
hóc.
6. Không cất giữ dụng cụ và hộp pin ở nơi nhiệt
độ có thể lên tới hoặc vượt quá 50°C.
7. Không đốt hộp pin ngay cả khi hộp pin đã bị
hư hại nặng hoặc hư hỏng hoàn toàn. Hộp pin
có thể nổ khi tiếp xúc với lửa.
8. Hãy cẩn trọng không làm rơi hoặc làm méo
pin.
9. Không sử dụng pin đã hỏng.
10. Pin nén lithium-ion là đối tượng có yêu cầu bắt
buộc theo Luật Hàng hoá Nguy hiểm.
Đốivớivậntảithươngmại,vídụnhưvậntảido
bênthứba,đạilýgiaonhận,thìyêucầuđặcbiệt
vềđónggóivànhãnghiphảiđượcgiámsát.
Đểchuẩnbịchomặthàngcầnvậnchuyển,cần
phảithamkhảoýkiếnchuyêngiavềvậtliệunguy
hiểm.Nếuđược,vuilòngtuânthủcácquyđịnh
quốcgiachitiếthơn.
Buộchoặcniêmphongcáctiếpđiểmmởvàđóng
góipintheocáchđóđểnókhôngthểdichuyển
trongbaobì.
11. Tuân theo các quy định của địa phương liên
quan đến việc thải bỏ pin.
LƯU GIỮ CÁC HƯỚNG DẪN
NÀY.
THẬN TRỌNG: Chỉ sử dụng pin Makita chính
hãng.ViệcsửdụngpinkhôngchínhhãngMakita,
hoặcpinđãđượcsửađổi,cóthểdẫnđếnnổpingây
racháy,thươngtíchvàthiệthạicánhân.Nócũngsẽ
làmmấthiệulựcbảohànhcủaMakitadànhchodụng
cụcủaMakitavàbộsạc.
Mẹo duy trì tuổi thọ tối đa cho
pin
1. Sạc hộp pin trước khi pin bị xả điện hoàn toàn.
Luôn dừng việc vận hành dụng cụ và sạc pin
khi bạn nhận thấy công suất dụng cụ bị giảm.
2. Không được phép sạc lại một hộp pin đã được
sạc đầy. Sạc quá mức sẽ làm giảm tuổi thọ của
pin.
3. Sạc pin ở nhiệt độ phòng 10°C - 40°C. Ðể cho
hộp pin nóng nguội lại dần trước khi sạc pin.
MÔ TẢ CHỨC NĂNG
THẬN TRỌNG: Luôn đảm bảo rằng đã tắt
dụng cụ và tháo hộp pin ra trước khi thực hiện
việc điều chỉnh hoặc kiểm tra chức năng trên
dụng cụ.
Lắp hoặc tháo hộp pin
THẬN TRỌNG: Luôn tắt dụng cụ trước khi
lắp hoặc tháo hộp pin.
THẬN TRỌNG: Giữ dụng cụ và hộp pin thật
chắc khi lắp hoặc tháo hộp pin.Khônggiữdụngcụ
vàhộppinthậtchắccóthểlàmtrượtchúngkhỏitay
vàlàmhưhỏngdụngcụvàhộppinhoặcgâythương
tíchcánhân.
►Hình1: 1.Đènchỉbáomàuđỏ2.Nút3.Hộppin
Đểtháohộppin,vừatrượtpinrakhỏidụngcụvừađẩy
trượtnútởphíatrướchộppin.
Đểlắphộppin,đặtthẳnghàngphầnchốtnhôracủa
hộppinvàophầnrãnhnằmtrênvỏvàtrượthộppinvào
vịtrí.Đưahộppinvàochođếnkhichốtkhóavàođúng