Makita LM003J User manual

LM003J
LM004J
EN Cordless Lawn Mower INSTRUCTION MANUAL 10
FR Tondeuse Sans Fil MANUEL D’ INSTRUCTIONS 23
DE Akku Rasenmäher BETRIEBSANLEITUNG 37
IT Tosaerba a batteria ISTRUZ IONI PER L’ USO 52
NL Accugrasmaaier GEBRUIKSAANW IJZ ING 66
ES Cortadora de Cesped MANUAL DE
INSTRUCCIONES 80
PT Cortadora de Grama a Bateria MANUAL DE INSTRUÇÕ ES 94
DA Akku-plæneklipper BRUGSANVISNING 108
EL Μηχανή γκαζόν με μπαταρία ΕΓΕΙΙΔΙ ΔΗΓΙΝ 121
TR Akülü m Bme Maknas KULLANMA KILAVUZ U 136

2
1232
4
Fig.1
1
Fig.2
1
Fig.3
1
Fig.4
1
Fig.5

3
1
Fig.6
1
Fig.7
Fig.8
Fig.9
1
1
1
Fig.10
1
Fig.11
2
1
3
Fig.12

4
1
2
Fig.13
1
2
Fig.14
1
2
Fig.15
2
1
Fig.16
1
2
Fig.17
Fig.18

5
12
Fig.19
1
Fig.20
12
Fig.21
1
2
3
4
5
Fig.22
1
2
Fig.23
1
Fig.24

6
1
Fig.25
1
2
Fig.26
1
Fig.27
1
Fig.28
1
2
Fig.29
1
Fig.30
1
Fig.31

7
1
2
Fig.32
Fig.33
Fig.34
1
2
3
Fig.35
Fig.36
Fig.37
1
3
2
Fig.38
1
Fig.39

8
Fig.40
1
2
Fig.41
1
Fig.42
1
Fig.43
1
2
Fig.44
1
Fig.45

9
1
Fig.46
2
1
3
Fig.47
1
2
3
4
Fig.48

10 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: LM003J LM004J
M o w i n g w i d t h ( b l a d e d i a m e t e r ) 480 m m 534 m m
N o l o a d s p e e d N o r m a l m o d e 3, 200 m i n -1 2, 800 m i n -1
S o f t n o -l o a d m o d e 2, 500 - 3, 200 m i n -1 2, 300 - 2, 800 m i n -1
N o i s e r e d u c t i o n m o d e 2, 500 m i n -1 2, 300 m i n -1
P a r t n u m b e r o f r e p l a c e m e n t
m o w e r b l a d e
S t r a i g h t m o w e r b l a d e 191V 97 -3 191V 96 -5
S t r a i g h t m o w e r b l a d e * 1 -191W 87 -2
M u l c h i n g b l a d e 191Y 6 4-6 191Y 6 5-4
Di m e n s i o n s
( L x W x H )
d u r i n g o p e r a t i o n L : 1, 6 7 0 m m t o 1, 7 45 m m
W : 550 m m
H : 96 5 m m t o 1, 07 5 m m
L : 1, 7 40 m m t o 1, 810 m m
W : 595 m m
H : 97 0 m m t o 1, 080 m m
w h e n s t o r e d
( w i t h o u t g r a s s b a s k e t )
585 m m x 550 m m x 900 m m 580 m m x 595 m m x 930 m m
T r a v e l i n g s p e e d 1.5 - 6 .5 k m / h
R a t e d v o l t a g e D.C . 57 .6 V - 6 4 V m a x
N e t w e i g h t 30.9 - 33.8 k g 31.5 - 34.6 k g
P r o t e c t i o n d e g r e e IP X 4
1. Mower blade for more e󰀩cient collection of grass.
Due to our continuing program of research and development, the specications herein are subject to change
w i t h o u t n o t i c e .
Specications may di󰀨er from country to country.
The weight may di󰀨er depending on the attachment(s), including the battery cartridge. The lightest and heavi-
e s t c o m b i n a t i o n s , a c c o r d i n g t o EP T A -P r o c e d u r e 01/ 2014, a r e s h o w n i n t h e t a b l e .
Applicable battery cartridge and charger
Battery cartridge B L 6 440 / B L 6 4100
C h a r g e r DC 6 4W A
Some of the battery cartridges and chargers listed above may not be available depending on your region of
r e s i d e n c e .
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
m e a n i n g b e f o r e u s e .
Do n o t e x p o s e t o m o i s t u r e .
T a k e p a r t i c u l a r c a r e a n d a t t e n t i o n .
R e a d i n s t r u c t i o n m a n u a l .
Danger; be aware of thrown objects.
T h e d i s t a n c e b e t w e e n t h e t o o l a n d
bystanders must be at least 15 m.
Never put your hands and feet near the
m o w e r b l a d e u n d e r t h e m o w e r . M o w e r
b l a d e s c o n t i n u e t o r o t a t e a f t e r t h e m o t o r i s
switched o󰀨.
Warning; Disconnect battery before
m aintenance.
El e c t r i c a l h a z a r d . C o n t a c t w i t h w a t e r c a n
c a u s e e l e c t r i c s h o c k .
Do n o t p o u r w a t e r .

11 ENGLISH
Ni-MH
Li-ion
Only for EU countries
Du e t o t h e p r e s e n c e o f h a z a r d o u s c o m -
p o n e n t s i n t h e e q u i p m e n t , w a s t e e l e c t r i c a l
a n d e l e c t r o n i c e q u i p m e n t , a c c u m u l a t o r s
and batteries may have a negative impact
o n t h e e n v i r o n m e n t a n d h u m a n h e a l t h .
Do n o t d i s p o s e o f e l e c t r i c a l a n d e l e c t r o n i c
a p p l i a n c e s o r b a t t e r i e s w i t h h o u s e h o l d w a s t e !
In a c c o r d a n c e w i t h t h e Eu r o p e a n Di r e c t i v e
o n w a s t e e l e c t r i c a l a n d e l e c t r o n i c e q u i p m e n t
a n d o n a c c u m u l a t o r s a n d b a t t e r i e s a n d
w a s t e a c c u m u l a t o r s a n d b a t t e r i e s , a s w e l l a s
t h e i r a d a p t a t i o n t o n a t i o n a l l a w , w a s t e e l e c -
t r i c a l e q u i p m e n t , b a t t e r i e s a n d a c c u m u l a t o r s
should be stored separately and delivered
t o a s e p a r a t e c o l l e c t i o n p o i n t f o r m u n i c i p a l
w a s t e , o p e r a t i n g i n a c c o r d a n c e w i t h t h e
r e g u l a t i o n s o n e n v i r o n m e n t a l p r o t e c t i o n .
This is indicated by the symbol of the
c r o s s e d -o u t w h e e l e d b i n p l a c e d o n t h e
equipm ent.
G u a r a n t e e d s o u n d p o w e r l e v e l a c c o r d i n g
t o EU O u t d o o r N o i s e Di r e c t i v e .
S o u n d p o w e r l e v e l a c c o r d i n g t o A u s t r a l i a
N S W N o i s e C o n t r o l R e g u l a t i o n .
Intended use
T h e m a c h i n e i s i n t e n d e d f o r l a w n m o w i n g .
Noise
The typical A-weighted noise level determined accord-
i n g t o EN 6 2841-4-3:
Model LM003J
M e a s u r e d s o u n d p o w e r l e v e l ( L W A ) : 91 d B ( A )
G u a r a n t e e d s o u n d p o w e r l e v e l ( L W A ) : 94 d B ( A )
S o u n d p r e s s u r e l e v e l ( L p A ) : 82 d B ( A )
Uncertainty for sound pressure level (K) :  dB (A)
Model LM004J
M e a s u r e d s o u n d p o w e r l e v e l ( L W A ) : 91 d B ( A )
G u a r a n t e e d s o u n d p o w e r l e v e l ( L W A ) : 94 d B ( A )
S o u n d p r e s s u r e l e v e l ( L p A ) : 82 d B ( A )
Uncertainty for sound pressure level (K) :  dB(A)
NOTE:
T h e d e c l a r e d n o i s e e m i s s i o n v a l u e ( s ) h a s b e e n
m e a s u r e d i n a c c o r d a n c e w i t h a s t a n d a r d t e s t m e t h o d
and may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may
also be used in a preliminary assessment of exposure.
WARNING: W ear ear protection.
WARNING: The noise emission during actual
use of the poer tool can di󰀨er from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o󰀨 and hen it is running idle in addition to the
trigger time).
Vibration
T h e v i b r a t i o n t o t a l v a l u e ( t r i -a x i a l v e c t o r s u m ) d e t e r -
m i n e d a c c o r d i n g t o EN 6 2841-4-3:
Model LM003J
V i b r a t i o n e m i s s i o n ( a h) : 2.5 m / s 2o r l e s s
Uncertainty (K) : 1.5 m/s2
Model LM004J
V i b r a t i o n e m i s s i o n ( a h) : 2.5 m / s 2o r l e s s
Uncertainty (K) : 1.5 m/s2
NOTE: T h e d e c l a r e d v i b r a t i o n t o t a l v a l u e ( s ) h a s b e e n
m e a s u r e d i n a c c o r d a n c e w i t h a s t a n d a r d t e s t m e t h o d
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the poer tool can di󰀨er from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o󰀨 and hen it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
t o t h i s i n s t r u c t i o n m a n u a l .
SAFETY W ARNINGS
General power tool safety warnings
WARNING Read all safety warnings, instructions,
illustrations and specications provided ith this
power tool. F a i l u r e t o f o l l o w a l l i n s t r u c t i o n s l i s t e d b e l o w
may result in electric shock, re and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term power tool in the warnings refers to your
mains-operated (corded) power tool or battery-operated
( c o r d l e s s ) p o w e r t o o l .
Cordless Lawn Mower Safety
W arnings
1. Do not use the lawnmower in bad weather
conditions, especially when there is a risk of
lightning. T h i s d e c r e a s e s t h e r i s k o f b e i n g s t r u c k
by lightning.
2. Thoroughly inspect the area for wildlife where
the lawnmower is to be used. Wildlife may be
injured by the lawnmower during operation.

12 ENGLISH
3. Thoroughly inspect the area where the lawn-
mower is to be used and remove all stones,
sticks, wires, bones, and other foreign objects.
Thrown objects can cause personal injury.
4. Before using the lawnmower, always visually
inspect to see that the blade and the blade
assembly are not worn or damaged. W o r n o r
damaged parts increase the risk of injury.
5. Check the grass catcher frequently for wear or
deterioration. A w o r n o r d a m a g e d g r a s s c a t c h e r
may increase the risk of personal injury.
6 . Keep guards in place. Guards must be in work-
ing order and be properly mounted. A g u a r d
t h a t i s l o o s e , d a m a g e d , o r i s n o t f u n c t i o n i n g c o r -
rectly may result in personal injury.
7 . Keep all cooling air inlets clear of debris.
Blocked air inlets and debris may result in over-
heating or risk of re.
8. W hile operating the lawnmower, always wear
non-slip and protective footwear. Do not oper-
ate the lawnmower when barefoot or wearing
open sandals. This reduces the chance of injury
t o t h e f e e t f r o m c o n t a c t w i t h t h e m o v i n g b l a d e .
9. W hile operating the lawnmower, always wear
long trousers. Ex p o s e d s k i n i n c r e a s e s t h e l i k e l i -
hood of injury from thrown objects.
10. Do not operate the lawnmower in wet grass.
W alk, never run. T h i s r e d u c e s t h e r i s k o f s l i p p i n g
and falling which may result in personal injury.
11. Do not operate the lawnmower on excessively
steep slopes. T h i s r e d u c e s t h e r i s k o f l o s s o f
control, slipping and falling which may result in
personal injury.
12. W hen working on slopes, always be sure of
your footing, always work across the face
of slopes, never up or down and exercise
extreme caution when changing direction. T h i s
r e d u c e s t h e r i s k o f l o s s o f c o n t r o l , s l i p p i n g a n d
falling which may result in personal injury.
13. Use extreme caution when reversing or pulling
the lawnmower towards you. Always be aware
of your surroundings. T h i s r e d u c e s t h e r i s k o f
t r i p p i n g d u r i n g o p e r a t i o n .
14. Do not touch blades and other haz ardous
moving parts while they are still in motion. T h i s
reduces the risk of injury from moving parts.
15. W hen clearing jammed material or cleaning
the lawnmower, make sure all power switches
are o󰀨 and the battery pack is disconnected.
Unexpected operation of the lawnmower may
result in serious personal injury.
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.
IMPORTANT SAFETY
INSTRUCTIONS
WARNING: Read all safety warnings and
all instructions. F a i l u r e t o f o l l o w t h e w a r n i n g s a n d
instructions may result in electric shock, re and/or
serious injury.
Save all warnings and instruc-
tions for future reference.
Training
1.
Read the instructions carefully. Be familiar with
the controls and the proper use of the mower.
2. Never allow children or people unfamiliar with
these instructions to use the mower. Local
regulations can restrict the age of the operator.
3. Never operate the mower while people, espe-
cially children, or pets are nearby.
4. Keep in mind that the operator or user is
responsible for accidents or haz ards occurring
to other people or their property.
5. Children should be supervised to ensure that
they do not play with the mower.
6 . Physical condition - Do not operate mower
hile under the inuence of drugs, alcohol, or
any medication.
Preparation
1.
W hile operating the mower, always wear sub-
stantial footwear and long trousers. Do not
operate the mower when barefoot or wearing
open sandals. Avoid wearing clothing or jewelry
that is loose tting or that has hanging cords or
ties. They can be caught in moving parts.
2. Before use, always visually inspect the mower for
damaged, missing or misplaced guards or shields.
3. Be sure the area is clear of other people before
mowing. Stop mower if anyone enters the area.
4. Always wear protective goggles to protect
your eyes from injury when using power tools.
The goggles must comply with ANSI Z 87.1 in
the USA, EN 166 in Europe, or AS/NZ S 1336
in Australia/New Z ealand. In Australia/New
Z ealand, it is legally required to wear a face
shield to protect your face, too.
It is an employer' s responsibility to enforce
the use of appropriate safety protective equip-
ments by the tool operators and by other per-
sons in the immediate working area.

13 ENGLISH
5. Check the blades or blade bolts carefully for
cracks or damage before operation. Replace
cracked or damaged blades or blade bolts
immediately.
6 . Remove foreign matters such as rocks, wire,
bottles, bones and large sticks from the work
area before mowing to prevent personal injury
or damage to the mower.
7 . Objects struck by the mower blade can cause
severe injuries to persons. The lawn should
always be carefully examined and cleared of
all objects prior to each mowing.
8. W atch for holes, ruts, bumps, rocks, or other
hidden objects. U n e v e n t e r r a i n c o u l d c a u s e a s l i p
a n d f a l l a c c i d e n t . T a l l g r a s s c a n h i d e o b s t a c l e s .
9. Use personal protective equipment. Always
wear eye protection. P r o t e c t i v e e q u i p m e n t s u c h
as a dust mask, non-skid safety shoes, hard hat or
h e a r i n g p r o t e c t i o n u s e d f o r a p p r o p r i a t e c o n d i t i o n s
will reduce personal injuries.
Operation
1. Do not overreach. Keep the balance at all
times. Always be sure of the footing on slopes.
W alk, never run.
2. Stop the moer and turn o󰀨 the machine, and
make sure that all moving parts have come to
a complete stop:
- whenever you leave the mower,
- before clearing blockages or unclogging chute,
- before checking, cleaning or working on the
mower,
- after striking a foreign object. Inspect the
mower for damage and make repairs before
restarting and operating the mower,
- whenever the mower starts vibrating
abnormally.
3. Never operate the mower with defective
guards or shields, or without safety devices,
for example deectors and/or grass basket, in
place.
4. Avoid using the mower in bad weather con-
ditions especially when there is a risk of
lightning.
5. W ear eye protection and stout shoes at all
times while operating the mower.
6 . Operate the mower only in daylight or in good
articial light.
7 . Switch on the mower carefully according to
instructions and with feet well away from the
blade(s).
8. Take care against injury to feet and hands from
the mower blades.
9. Always ensure that the ventilation openings
are kept clear of debris.
10. Mow across the face of slopes, never up and
down. Exercise extreme caution when chang-
ing direction on slopes. Do not mow exces-
sively steep slopes.
11. Use extreme caution when reversing or pulling
the mower towards you.
12. Stop the blade(s) if the mower has to be tilted
for transportation when crossing surfaces
other than grass, and when transporting the
mower to and from the area to be used.
13. Do not tilt the mower when switching on the
motor, except if the mower has to be tilted
for starting. In this case, do not tilt it more
than absolutely necessary and lift only the
part, which is away from the operator. Always
ensure that both hands are in the operating
position before returning the mower to the
ground.
14. Do not put hands or feet near or under rotating
parts. Keep clear of the discharge opening at
all times.
15. Do not transport the mower while the mower is
turned on.
16 . Avoid operating the mower in wet grass.
17 . Alays keep a rm hold on the handle.
18. Don' t grasp the exposed cutting blades or
cutting edges when picking up or holding the
mower.
19. Keep hands and feet away from rotating
blades. Caution - Blades coast after the mower
is sitched o󰀨.
20. Stop operation immediately if you notice
anything unusual. Sitch o󰀨 the moer. Then
inspect the mower.
21. Never attempt to make cutting height adjust-
ments while mower is running if the mower
has cutting height adjustment feature.
22. Release switch lever and wait for blade rota-
tion to stop before crossing driveways, walks,
roads, and any gravel-covered areas. Also turn
o󰀨 the machine if you leave the moer, reach
to pick up or remove something out of your
way, or for any other reason that may distract
you from what you are doing.
23. If the mower strikes a foreign object, follow
these steps:
- Stop the mower, release the switch lever and
wait until the blade comes to a complete stop.
- Remove the battery cartridge.
- Thoroughly inspect the mower for any
damage.
- Replace the blade if it is damaged in any way.
Repair any damage before restarting and con-
tinuing to operate the mower.
24. Do not start the mower when standing in front
of the discharge opening.
25. If the mower starts to vibrate abnormally
(check immediately)
- inspect for damage,
- replace or repair any damaged parts,
- check for and tighten any loose parts.
26 . Never direct discharged material toward
anyone. Avoid discharging material against a
wall or obstruction. Material may ricochet back
t o w a r d t h e o p e r a t o r . S t o p t h e b l a d e w h e n c r o s s i n g
g r a v e l s u r f a c e s .
27 . Do not pull the mower backwards unless
absolutely necessary. When you are compelled
t o b a c k t h e m o w e r f r o m a f e n c e o r o t h e r s i m i l a r
o b s t r u c t i o n , l o o k d o w n a n d b e h i n d b e f o r e a n d
w h i l e m o v i n g b a c k w a r d s .
28. Shut the motor o󰀨 and ait until the blade
comes to a complete stop before removing the
grass catcher. B e w a r e t h a t t h e b l a d e s c o a s t a f t e r
turn o󰀨.

14 ENGLISH
29. W hen you use the machine on muddy ground,
wet slope, or slippery place, pay attention to
your footing.
30. Do not submerge the machine into a puddle.
31. W hen operating the machine, pay attention to
piping and wiring.
Maintenance and storage
1. Replace worn or damaged parts for safety.
Use only genuine replacement parts and
accessories.
2. Inspect and maintain the mower regularly.
3. W hen not in use, store the mower out of the
reach of children.
4. Keep all nuts, bolts, and screws tight to
be sure the equipment is in safe working
condition.
5. Check the grass basket frequently for wear or
deterioration. For storage, always make sure
the grass basket is empty. Replace a worn
grass basket with a new factory replacement
for safety.
6 . Use only the manufacturer genuine blades
specied in this manual.
7 . Be careful during adjustment of the mower
to prevent entrapment of the ngers beteen
moving blades and xed parts of the moer.
8. Check the blade mounting bolt at frequent
intervals for proper tightness.
9. Always allow the mower to cool down before
storing.
10. W hen servicing the blades be aware that, even
though the poer source is sitched o󰀨, the
blades can still be moved.
11. Never remove or tamper with safety devices.
Check their proper operation regularly. Never
do anything to interfere with the intended
function of a safety device or to reduce the
protection provided by a safety device.
12. Do not leave the machine unattended outdoors
in the rain.
13. W hen storing the machine, avoid direct sun-
light and rain, and store it in a place where it
does not get hot or humid.
Battery tool use and care
1. Recharge only ith the charger specied by
the manufacturer. A c h a r g e r t h a t i s s u i t a b l e f o r
one type of battery pack may create a risk of re
when used with another battery pack.
2. Use poer tools only ith specically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and re.
3. W hen battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a re.
4. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, ush ith ater. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
i r r i t a t i o n o r b u r n s .
5. Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behaviour resulting in
re, explosion or risk of injury.
6 . Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 1 C may cause explosion.
7 . Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specied in the instruc-
tions. Charging improperly or at temperatures
outside the specied range may damage the
battery and increase the risk of re.
Electrical and battery safety
1. Do not dispose of the battery(ies) in a re.
The cell may explode. Check with local codes for
p o s s i b l e s p e c i a l d i s p o s a l i n s t r u c t i o n s .
2. Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may cause
damage to the eyes or skin. It may be toxic if
s w a l l o w e d .
3.
Do not charge battery in rain, or in wet locations.
4. Do not charge the battery outdoors.
5. Do not handle charger, including charger plug,
and charger terminals with wet hands.
6 . Do not replace the battery in the rain.
7 . Do not wet the terminal of battery with liquid
such as water, or submerge the battery. Do not
leave the battery in the rain, nor charge, use,
or store the battery in a damp or wet place. If
t h e t e r m i n a l g e t s w e t o r l i q u i d e n t e r s i n s i d e o f b a t -
tery, the battery may be short circuited and there is
a risk of overheat, re, or explosion.
8. After removing the battery from the machine or
charger, be sure to attach the battery cover to
the battery and store it in a dry place.
9. Do not replace the battery with wet hands.
10. Avoid dangerous environment. Don' t use the
machine in dump or wet locations or expose it
to rain. W a t e r e n t e r i n g t h e m a c h i n e w i l l i n c r e a s e
t h e r i s k o f e l e c t r i c s h o c k .
11. If the battery cartridge gets wet, drain the
water inside and then wipe it with a dry cloth.
Dry the battery cartridge completely in a dry
place before use.
Service
1. Have your poer tool serviced by a ualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
t o o l i s m a i n t a i n e d .
2. Never service damaged battery packs. S e r v i c e
of battery packs should only be performed by the
m a n u f a c t u r e r o r a u t h o r i z e d s e r v i c e p r o v i d e r s .
SAVE THESE INSTRUCTIONS.
WARNING: DO NOT let comfort or familiarity
with product (gained from repeated use) replace
strict adherence to safety rules for the subject
product.
MISUSE or failure to follow the safety rules stated
in this instruction manual may cause serious
personal injury.

15 ENGLISH
Important safety instructions for
battery cartridge
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery char-
ger, (2) battery, and (3) product using battery.
2. Do not disassemble or tamper with the battery
cartridge. It may result in a re, excessive heat,
o r e x p l o s i o n .
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4.
If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
( 1) Do not touch the terminals with any con-
ductive material.
( 2) Avoid storing battery cartridge in a con-
tainer with other metal objects such as
nails, coins, etc.
( 3) Do not expose battery cartridge to water
or rain.
A battery short can cause a large current
o, overheating, possible burns and even a
breakdown.
6 . Do not store and use the tool and battery car-
tridge in locations where the temperature may
reach or exceed 50 ° C (122 ° F).
7 . Do not incinerate the battery cartridge even if
it is severely damaged or is completely worn
out. The battery cartridge can explode in a re.
8. Do not nail, cut, crush, throw, drop the battery
cartridge, or hit against a hard object to the
battery cartridge. Such conduct may result in a
re, excessive heat, or explosion.
9. Do not use a damaged battery.
10.
The contained lithium-ion batteries are subject to
the Dangerous Goods Legislation requirements.
For commercial transports e.g. by third parties,
f o r w a r d i n g a g e n t s , s p e c i a l r e q u i r e m e n t o n p a c k -
a g i n g a n d l a b e l i n g m u s t b e o b s e r v e d .
F o r p r e p a r a t i o n o f t h e i t e m b e i n g s h i p p e d , c o n s u l t -
i n g a n e x p e r t f o r h a z a r d o u s m a t e r i a l i s r e q u i r e d .
Please also observe possibly more detailed
n a t i o n a l r e g u l a t i o n s .
Tape or mask o󰀨 open contacts and pack up the
battery in such a manner that it cannot move
a r o u n d i n t h e p a c k a g i n g .
11. W hen disposing the battery cartridge, remove
it from the tool and dispose of it in a safe
place. Follow your local regulations relating to
disposal of battery.
12. Use the batteries only with the products
specied by Makita. In s t a l l i n g t h e b a t t e r i e s t o
non-compliant products may result in a re, exces-
sive heat, explosion, or leak of electrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
14. During and after use, the battery cartridge may
take on heat which can cause burns or low
temperature burns. Pay attention to the han-
dling of hot battery cartridges.
15. Do not touch the terminal of the tool imme-
diately after use as it may get hot enough to
cause burns.
16 . Do not allow chips, dust, or soil stuck into the
terminals, holes, and grooves of the battery
cartridge. It may cause heating, catching re,
burst and malfunction of the tool or battery car-
tridge, resulting in burns or personal injury.
17 . Unless the tool supports the use near
high-voltage electrical power lines, do not use
the battery cartridge near a high-voltage elec-
trical power lines. It may result in a malfunction
or breakdown of the tool or battery cartridge.
18. Keep the battery away from children.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
U s e o f n o n -g e n u i n e M a k i t a b a t t e r i e s , o r b a t t e r i e s t h a t
have been altered, may result in the battery bursting
causing res, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
c h a r g e r .
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 ° C - 40 ° C (50 ° F - 104 ° F). Let
a hot battery cartridge cool down before
charging it.
4. W hen not using the battery cartridge, remove
it from the tool or the charger.
5. Charge the battery cartridge if you do not use
it for a long period (more than six months).
ASSEMBLY
WARNING: Always be sure that the battery
cartridges are removed before carrying out any
work on the machine. Failure to remove the battery
cartridges may result in serious personal injury from
a c c i d e n t a l s t a r t -u p .
WARNING: Never start the mower unless it is
completely assembled. O p e r a t i o n o f t h e m a c h i n e
in a partially assembled state may result in serious
personal injury from accidental start-up.
Installing the handle
NOTICE: W hen installing the handles, be careful
not to pinch the cord between the handles. If t h e
cord is damaged, the mower switch may not work.

16 ENGLISH
1. A l i g n t h e h o l e i n t h e l o w e r h a n d l e w i t h t h e h o l e
i n t h e u p p e r h a n d l e , t h e n i n s e r t t h e b o l t f r o m o u t s i d e ,
a n d t h e n t i g h t e n t h e t h u m b n u t f r o m i n s i d e . P e r f o r m t h e
s a m e p r o c e d u r e o n t h e o t h e r s i d e .
 Fig.1: 1. B o l t 2. T h u m b n u t 3. Low erhandle
4. U pperhandle
2. T u r n t h e k n o b 90° w h i l e p u l l i n g t h e k n o b o n t h e
l o w e r h a n d l e t o r e l e a s e t h e l o c k i n g p i n . P e r f o r m t h e
s a m e p r o c e d u r e o n t h e o t h e r s i d e . R a i s e t h e h a n d l e ,
a n d t h e n t u r n t h e k n o b o n b o t h s i d e s 90° . M a k e s u r e
that the knobs are securely xed.
 Fig.2: 1. Knob
NOTE: S u p p o r t i n g t h e h a n d l e m a k e s i t e a s i e r t o
r e l e a s e t h e l o c k i n g p i n w h e n p u l l i n g t h e k n o b .
NOTE: W h e n t u r n i n g t h e k n o b , b e c a r e f u l n o t t o g e t
t h e c o r d c a u g h t i n t h e k n o b .
 Fig.3: 1. Knob
Removing the mulching plug
1. O p e n t h e r e a r c o v e r .
 Fig.4: 1. R e a r c o v e r
2.
Lift up the mulching plug slightly, and then remove it.
 Fig.5: 1. M u l c h i n g p l u g
Assembling the grass basket
1. P i c k u p t h e u p p e r c l i p o f t h e g r a s s b a s k e t .
 Fig.6: 1. U p p e r c l i p
2. In s e r t t h e f r a m e i n t o t h e g r a s s b a s k e t a s f a r a s i t
w i l l g o w h i l e h o l d i n g t h e h a n d l e o f t h e f r a m e .
 Fig.7: 1. H a n d l e
NOTICE: Do n o t i n s e r t t h e h a n d l e i n t o t h e g r a s s
b a s k e t . B e s u r e t o i n s e r t t h e f r a m e a l o n g t h e s t i t c h o f
t h e g r a s s b a s k e t .
3. M a k e s u r e t h a t t h e r e i s n o s a g g i n g o n t h e c o r n e r s
o f t h e g r a s s b a s k e t .
 Fig.8
4. O p e n t h e u p p e r c l i p , a n d a t t a c h i t t o t h e f r a m e .
 Fig.9
5. Attach all the other clips as shown in the gure.
Make sure that all the clips are securely attached to the
f r a m e .
 Fig.10: 1. C l i p
Installing or removing the grass
basket
T o i n s t a l l t h e g r a s s b a s k e t , f o l l o w t h e s t e p s b e l o w .
1. O p e n t h e r e a r c o v e r .
 Fig.11: 1. R e a r c o v e r
2. H o l d t h e h a n d l e o f t h e g r a s s b a s k e t , a n d t h e n
hook the grass basket on the rod of the mower body as
shown in the gure.
 Fig.12: 1. G r a s s b a s k e t 2. H a n d l e 3. R o d
T o r e m o v e t h e g r a s s b a s k e t , o p e n t h e r e a r c o v e r , a n d
then remove the grass basket by holding the handle.
Attaching the mulching plug
1. O p e n t h e r e a r c o v e r , a n d t h e n r e m o v e t h e g r a s s b a s k e t .
 Fig.13: 1. R e a r c o v e r 2. G r a s s b a s k e t
2. Attach the mulching plug by pushing it as far as it
will go so that the protrusions on the mulching plug t
i n t o t h e h o l e s o n t h e m a c h i n e .
 Fig.14: 1. M u l c h i n g p l u g 2. P r o t r u s i o n
Installing or removing the discharge chute
T o i n s t a l l t h e d i s c h a r g e c h u t e , f o l l o w t h e s t e p s b e l o w .
1. O p e n t h e r e a r c o v e r , a n d t h e n r e m o v e t h e g r a s s
b a s k e t a n d m u l c h i n g p l u g .
2. H o o k t h e h o l e s o n t h e d i s c h a r g e c h u t e t o t h e
protrusions on the mower body as shown in the gure.
 Fig.15: 1. Di s c h a r g e c h u t e 2. P r o t r u s i o n
T o r e m o v e t h e d i s c h a r g e c h u t e , o p e n t h e r e a r c o v e r ,
a n d t h e n r e m o v e t h e d i s c h a r g e c h u t e .
FUNCTIONAL
DESCRIPTION
Installing or removing battery cartridge
CAUTION: Alays sitch o󰀨 the machine
before installing or removing of the battery
cartridge.
CAUTION: Hold the machine and the battery
cartridge rmly hen installing or removing bat-
tery cartridge. F a i l u r e t o h o l d t h e m a c h i n e a n d t h e
battery cartridge rmly may cause them to slip o󰀨
your hands and result in damage to the machine and
battery cartridge and a personal injury.
CAUTION: Make sure that you lock the battery
cover before use. Otherwise, mud, dirt, or water may
cause damage to the product or the battery cartridge.
CAUTION: Do not install the battery cartridge
forcibly. If the cartridge does not slide in easily, it is
not being inserted correctly.
CAUTION: Hold the battery cover rmly hen
installing or removing the battery cartridge.
To install the battery cartridge;
1. Pull up the locking lever, and then open the battery
c o v e r .
 Fig.16: 1. Battery cover 2. L o c k i n g l e v e r
2. old the battery cartridge in the upright position
w i t h t h e i n d i c a t o r l a m p s f a c i n g f o r w a r d . In s e r t t h e b a t -
tery cartridge into the machine until it is latched with the
battery lock lever.
 Fig.17: 1. In d i c a t o r l a m p s 2. Battery lock lever
NOTE: Pushing the battery vertically from above
m a k e s t h e m a c h i n e h a r d e r t o m o v e a n d m a k e s i t
easier to install the battery.
 Fig.18

17 ENGLISH
3. Close the battery cover and push it until it is
l a t c h e d w i t h t h e l o c k i n g l e v e r .
To remove the battery cartridge;
1. Pull up the locking lever and open the battery
c o v e r .
2. Push the battery lock lever, and then pull out the
battery cartridge from the machine.
 Fig.19: 1. Battery lock lever 2. Battery cartridge
3. Close the battery cover.
Machine / battery protection system
The machine is equipped with a machine/battery
protection system. This system automatically cuts o󰀨
power to the motor to extend machine and battery life.
The machine will automatically stop during operation if
the machine or battery is placed under one of the fol-
l o w i n g c o n d i t i o n s :
Overload protection
When the machine or battery is operated in a manner
that causes it to draw an abnormally high current,
the machine automatically stops and the main power
l a m p b l i n k s i n g r e e n . In t h i s s i t u a t i o n , t u r n t h e m a c h i n e
o󰀨 and stop the application that caused the machine
t o b e c o m e o v e r l o a d e d . T h e n t u r n t h e m a c h i n e o n t o
r e s t a r t .
Overheat protection
If the machine or battery cartridge is overheated, the
machine stops automatically. When the machine is
o v e r h e a t e d , t h e m a i n p o w e r l a m p l i g h t s u p i n r e d . W h e n
the battery cartridge is overheated, the main power
lamp blinks in red. Let the machine and/or battery cool
d o w n b e f o r e t u r n i n g t h e m a c h i n e o n a g a i n .
Overdischarge protection
When the battery capacity is not enough, the machine
stops automatically and the main power lamp blinks in
r e d .
In this case, remove the battery from the machine and
charge the battery cartridge or change the battery car-
tridge to fully charged one.
Protections against other causes
Protection system is also designed for other causes that
c o u l d d a m a g e t h e m a c h i n e a n d a l l o w s t h e m a c h i n e t o
stop automatically. Take all the following steps to clear
t h e c a u s e s , w h e n t h e m a c h i n e h a s b e e n b r o u g h t t o a
temporary halt or stop in operation.
1. Turn the machine o󰀨, and then turn it on again to
r e s t a r t .
. Charge the battery(ies) or replace it/them with
recharged battery(ies).
. Let the machine and battery(ies) cool down.
If no improvement can be found by restoring protection
system, then contact your local Makita Service Center.
NOTICE: If the machine stops due to a cause
not described above, refer to the section for
troubleshooting.
Indicating the remaining battery
capacity
 Fig.20: 1. Battery indicator
When the remaining battery capacity gets low, the bat-
tery indicator blinks on the applicable battery side. By
further use, the machine stops and the battery indicator
lights up. In this situation, charge the battery cartridge.
Indicating the remaining battery
capacity
Press the check button on the battery cartridge to indi-
cate the remaining battery capacity. The indicator lamps
l i g h t u p f o r a f e w s e c o n d s .
 Fig.21: 1. In d i c a t o r l a m p s 2. C h e c k b u t t o n
Indicator lamps Remaining
capacity
Lighted O󰀨 Blinking
7 5% t o 100%
50% t o 7 5%
25% t o 50%
0% t o 25%
C h a r g e t h e
battery.
The battery
may have
m a l f u n c t i o n e d .
NOTE: De p e n d i n g o n t h e c o n d i t i o n s o f u s e a n d t h e
ambient temperature, the indication may di󰀨er slightly
from the actual capacity.
NOTE: The rst (far left) indicator lamp will blink when
the battery protection system works.
Control panel
T h e c o n t r o l p a n e l h a s t h e m a i n p o w e r s w i t c h a n d t h e
m o d e s w i t c h i n g b u t t o n .
 Fig.22: 1. S o f t n o -l o a d m o d e l a m p 2. N o i s e r e d u c -
t i o n m o d e l a m p 3. M o d e s w i t c h i n g b u t t o n
4. M a i n p o w e r l a m p 5. M a i n p o w e r s w i t c h
Main power switch
WARNING: Alays turn o󰀨 the main poer
switch when not in use.
T o t u r n o n t h e m a c h i n e , p r e s s t h e m a i n p o w e r s w i t c h .
The main power lamp lights up in green. To turn o󰀨 the
m a c h i n e , p r e s s t h e m a i n p o w e r s w i t c h a g a i n .

18 ENGLISH
NOTE: If t h e m a i n p o w e r l a m p l i g h t s u p i n r e d o r
b l i n k s i n r e d o r g r e e n , r e f e r t o t h e i n s t r u c t i o n s f o r
machine/battery protection system.
NOTE: This machine employs the auto power-o󰀨
f u n c t i o n . T o a v o i d u n i n t e n t i o n a l s t a r t u p , t h e m a i n
power switch will automatically shut down when the
s w i t c h l e v e r a n d d r i v e l e v e r ( i f e q u i p p e d ) a r e n o t
p u l l e d f o r a c e r t a i n p e r i o d a f t e r t h e m a i n p o w e r s w i t c h
i s t u r n e d o n .
Mode switching button
ou can switch the operating mode by pressing the
m o d e s w i t c h i n g b u t t o n . W h e n t h e m a c h i n e i s t u r n e d o n ,
t h e m a c h i n e s t a r t s u p i n t h e n o r m a l m o d e .
R e f e r t o t h e t a b l e b e l o w f o r e a c h m o d e .
Mode Lamp Description
N o r m a l m o d e B o t h t h e s o f t
n o -l o a d m o d e l a m p
a n d n o i s e r e d u c t i o n
mode lamp are o󰀨.
T h e m a c h i n e w o r k s
i n t h e n o r m a l m o d e .
S o f t n o -l o a d
m o d e
T h e s o f t n o -l o a d
m o d e l a m p l i g h t s u p
i n g r e e n .
Y o u c a n m i n i m i z e a
s t a r t -u p s h o c k a n d
s t a r t t h e m a c h i n e
smoothly.
N o i s e r e d u c t i o n
m o d e
T h e n o i s e r e d u c t i o n
m o d e l a m p l i g h t s u p
i n g r e e n .
Y o u c a n d e c r e a s e
t h e n o i s e a t m o w i n g .
Switch action
WARNING: Before installing the battery car-
tridge, always check to see that the switch lever
actuates properly and returns to the original posi-
tion when released. O p e r a t i n g t h e m a c h i n e w i t h a
switch that does not actuate properly can lead to loss
of control and serious personal injury.
NOTE: T h e m o w e r d o e s n o t s t a r t w i t h o u t p r e s s i n g t h e
s w i t c h b u t t o n e v e n t h e s w i t c h l e v e r i s p u l l e d .
NOTE: Mower may not start due to the overload
when you try to mow long or dense grass at a time.
In c r e a s e t h e m o w i n g h e i g h t i n t h i s c a s e .
This machine is equipped with the switch button. If you
notice anything unusual with the switch button, stop
the operation immediately and have it checked by your
n e a r e s t M a k i t a A u t h o r i z e d S e r v i c e C e n t e r .
1. Install the battery cartridge, and then close the
battery cover.
2. P r e s s t h e m a i n p o w e r s w i t c h .
NOTE: The main power lamp blinks in green if you
p r e s s t h e m a i n p o w e r s w i t c h w h i l e p u l l i n g t h e s w i t c h
l e v e r . R e l e a s e t h e s w i t c h l e v e r b e f o r e p r e s s i n g t h e
m a i n p o w e r s w i t c h .
3. Pull the switch lever toward you while holding
d o w n t h e s w i t c h b u t t o n . R e l e a s e t h e s w i t c h b u t t o n w h e n
t h e m o t o r s t a r t s r u n n i n g .
 Fig.23: 1. S w i t c h b u t t o n 2. S w i t c h l e v e r
4. W h i l e h o l d i n g t h e s w i t c h l e v e r , p u s h t h e d r i v e l e v e r
f o r w a r d a n d h o l d i t t o d r i v e t h e r e a r w h e e l s .
 Fig.24: 1. Dr i v e l e v e r
NOTE: ou can drive the rear wheels by pushing
t h e d r i v e l e v e r f o r w a r d a n d h o l d i t w i t h o u t p u l l i n g t h e
s w i t c h l e v e r .
5. R e l e a s e t h e d r i v e l e v e r a n d t h e s w i t c h l e v e r t o
s t o p t h e m a c h i n e .
Adjusting the mowing height
WARNING: Never put your hand or leg under
the mower body when adjusting the mowing
height.
WARNING: Always make sure that the lever
ts in the groove properly before operation.
The mowing height can be adjusted in the range of
b e t w e e n 20 m m a n d 100 m m .
Turn o󰀨 the machine, and then pull the mowing height
adjusting lever outward of the mower body and move it
to your desired mowing height.
 Fig.25: 1. Mowing height adjusting lever
T h e t a b l e b e l o w s h o w s t h e r e l a t i o n s h i p b e t w e e n t h e n u m b e r
on the mower body and the approximate mowing height.
Number Mowing height
120 m m
226 m m
332 m m
439 m m
547 m m
655 m m
76 3 m m
87 4 m m
986 m m
10 100 m m
H o l d t h e l o w e r h a n d l e w i t h o n e h a n d , a n d t h e n m o v e
the mowing height adjusting lever with the other hand.
 Fig.26: 1. Mowing height adjusting lever 2. Low erhandle
NOTE: The mowing height gures should be used
just as a guideline. Depending on the conditions of
the lawn or the ground, the actual lawn height may
become slightly di󰀨erent from the set height.
NOTE: Try a test mowing of grass in a less conspicu-
ous place to get your desired height.
Grass level indicator
G r a s s l e v e l i n d i c a t o r s h o w s t h e v o l u m e o f m o w e d
g r a s s . W h e n t h e g r a s s b a s k e t i s n o t f u l l , t h e i n d i c a t o r
oats while the blades are running.
 Fig.27: 1. G r a s s l e v e l i n d i c a t o r
W h e n t h e g r a s s b a s k e t i s a l m o s t f u l l , t h e i n d i c a t o r d o e s
not oat while the blades are running. In this case, stop
the operation immediately and empty the basket.
 Fig.28: 1. G r a s s l e v e l i n d i c a t o r
NOTE: T h i s i n d i c a t o r i s a r o u g h g u i d e . De p e n d i n g o n
t h e c o n d i t i o n s o f i n s i d e o f t h e b a s k e t , t h i s i n d i c a t o r
may not work properly.

19 ENGLISH
Adjusting the handle height
The handle height can be adjusted in two levels.
1.
H o l d t h e l o w e r h a n d l e , a n d t h e n t u r n t h e k n o b 90°
w h i l e p u l l i n g t h e k n o b o n t h e l o w e r h a n d l e t o r e l e a s e t h e
l o c k i n g p i n . P e r f o r m t h e s a m e p r o c e d u r e o n t h e o t h e r s i d e .
 Fig.29: 1. Low erhandle 2. Knob
NOTE: S u p p o r t i n g t h e h a n d l e m a k e s i t e a s i e r t o
r e l e a s e t h e l o c k i n g p i n w h e n p u l l i n g t h e k n o b .
2. Adjust the handle height, and then turn the knob on
both sides . Make sure that the knobs are securely xed.
 Fig.30: 1. Knob
Adjusting the traveling speed
 Fig.31: 1. S p e e d l e v e r
The traveling speed can be adjusted with the speed
lever. To decrease the speed, pull the lever toward you,
a n d t o i n c r e a s e t h e s p e e d , t u r n t h e l e v e r f o r w a r d .
Using mulching plug
The mulching plug allows you to return the cut grass
t o t h e g r o u n d w i t h o u t g a t h e r i n g t h e c u t g r a s s i n t h e
grass basket. When you operate the machine with the
m u l c h i n g p l u g , b e s u r e t o r e m o v e t h e g r a s s b a s k e t o r
d i s c h a r g e c h u t e .
NOTICE: W hen using the machine with the
mulching plug, make sure that the total length of
grass after cutting is 30 mm or more, and the cut
length is 15 mm or less.
 Fig.32: (1) 30 m m o r m o r e (2) 15 m m o r l e s s
Using the discharge chute
The discharge chute allows you to discharge the cut
g r a s s t o t h e g r o u n d f r o m t h e r i g h t s i d e o f t h e m a c h i n e
w i t h o u t g a t h e r i n g t h e c u t g r a s s i n t h e g r a s s b a s k e t . W h e n
you operate the machine with the discharge chute, be
s u r e t o r e m o v e t h e g r a s s b a s k e t a n d m u l c h i n g p l u g .
Using the rear discharge
Using the rear discharge allows you to discharge the cut
g r a s s t o t h e g r o u n d f r o m t h e r e a r s i d e o f t h e m a c h i n e
w i t h o u t g a t h e r i n g t h e c u t g r a s s i n t h e g r a s s b a s k e t .
When you operate the machine using the rear dis-
c h a r g e , b e s u r e t o r e m o v e t h e m u l c h i n g p l u g , a n d g r a s s
b a s k e t o r d i s c h a r g e c h u t e , a n d c l o s e t h e r e a r c o v e r .
Electronic function
T h e m a c h i n e i s e q u i p p e d w i t h t h e e l e c t r o n i c f u n c t i o n s
for easy operation.
•S o f t s t a r t a t d r i v i n g
T h e s o f t -s t a r t f u n c t i o n m i n i m i z e s s t a r t -u p s h o c k ,
and makes the machine start smoothly.
•El e c t r i c b r a k e
T h i s m a c h i n e i s e q u i p p e d w i t h a n e l e c t r i c b r a k e .
If the machine consistently fails to quickly stop
t h e m o w e r b l a d e s a f t e r r e l e a s i n g t h e s w i t c h l e v e r ,
h a v e t h e m a c h i n e s e r v i c e d a t M a k i t a A u t h o r i z e d
S e r v i c e C e n t e r .
OPERATION
Mowing
WARNING: Before mowing, clear away sticks
and stones from mowing area. Furthermore, clear
away any weeds from mowing area in advance.
WARNING: Always wear the safety goggles or
safety glasses with side shields when operating
the mower.
CAUTION: If the cut grass or foreign object
blocks up inside of the mower body, be sure to
remove the battery cartridges and wear gloves
before removing the grass or foreign object.
NOTICE: Use this machine for mowing lawn only.
Do not mow weeds with this machine.
 Fig.33
Firmly hold the handle with both hands when mowing. The mowing
speed guideline is approximately  to 1 meters per 1 seconds.
 Fig.34
NOTE: W h e n c u t t i n g l o n g l a w n o r d e n s e l a w n , i f t h e
unevenness in the length of lawn or poor nish is
f o u n d a f t e r m o w i n g , o r d e c r e a s e o f t h e m o t o r s p e e d
i s f o u n d d u r i n g m o w i n g , d e c r e a s e t h e m o w i n g s p e e d
l o w e r t h a n r e c o m m e n d e d i n t h i s m a n u a l , o r r a i s e t h e
m o w i n g h e i g h t .
T h e c e n t e r l i n e s o f t h e f r o n t w h e e l s a r e g u i d e l i n e s t o
m o w i n g w i d t h . U s i n g t h e c e n t e r l i n e s a s g u i d e l i n e s ,
mow in strips. Overlap by one half to one third the previ-
ous strip to mow the lawn evenly.
 Fig.35: 1. M o w i n g w i d t h 2. O v e r l a p p i n g a r e a
3. C e n t e r l i n e
C h a n g e t h e m o w i n g d i r e c t i o n e a c h t i m e t o p r e v e n t t h e
grass grain pattern from forming in just one direction.
 Fig.36
Periodically check the grass basket for mowed grass.
Empty the grass before it becomes full. Before every peri-
odical check, be sure to stop and turn o󰀨 the machine.
NOTICE: Using the mower with the grass basket
full prevents smooth blade rotation and places
an extra load on the motor, which may cause
breakdown.
Mowing long lawn
Do not try to cut long lawn all at once. Instead, mow the
lawn in steps. Leave a day or two between mowings
until the lawn becomes evenly short.
 Fig.37
NOTE: M o w i n g l o n g l a w n t o s h o r t l e n g t h a l l a t o n c e
may cause the lawn to die. The cut lawn may also
block up inside of the mower body.
NOTE: If t h e u n e v e n n e s s i n t h e l e n g t h o f l a w n o r p o o r
nish is found after mowing, or decrease of the motor
s p e e d i s f o u n d d u r i n g m o w i n g , d e c r e a s e t h e m o w i n g
s p e e d , o r r a i s e t h e m o w i n g h e i g h t .

20 ENGLISH
Emptying the grass basket
WARNING: To reduce a risk of accident, reg-
ularly check the grass basket for any damage or
weakened strength. Replace the grass basket if
necessary.
1. R e l e a s e t h e s w i t c h l e v e r a n d d r i v e l e v e r .
2. Turn o󰀨 the machine.
3. O p e n t h e r e a r c o v e r a n d t a k e o u t t h e g r a s s b a s k e t
by holding the handle.
 Fig.38: 1. R e a r c o v e r 2. H a n d l e 3. G r a s s b a s k e t
4. Empty the grass basket.
MAINTENANCE
WARNING: Always be sure that the battery
cartridges are removed from the machine before
storing or carrying the machine or attempting to
perform inspection or maintenance.
WARNING: W ear gloves when performing
inspection or maintenance.
WARNING: Always wear the safety goggles or
safety glasses with side shields when performing
inspection or maintenance.
NOTICE: Never use gasoline, benz ine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
T o m a i n t a i n p r o d u c t S A F ET Y a n d R EL IA B IL IT Y ,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Maintenance
1. Remove the battery cartridge, and then close the
battery cover.
2. P u t t h e m o w e r o n i t s s i d e . C l e a n g r a s s c l i p p i n g s
a c c u m u l a t e d o n t h e u n d e r s i d e o f m o w e r d e c k .
3. P o u r w a t e r t o w a r d t h e b o t t o m o f t h e m a c h i n e t o
w h i c h t h e b l a d e i s a t t a c h e d .
NOTICE: Do not wash the machine with high
pressure water.
4. C h e c k a l l n u t s , b o l t s , s c r e w s , e t c . f o r t i g h t n e s s .
5. In s p e c t m o v i n g p a r t s f o r d a m a g e , b r e a k a g e , a n d
w e a r . Da m a g e d o r m i s s i n g p a r t s s h o u l d b e r e p a i r e d o r
replaced.
6. S t o r e t h e m o w e r i n a s a f e p l a c e o u t o f t h e r e a c h o f
c h i l d r e n .
NOTICE: Do not pour water to the area shown in
the gure. Pouring water to the motor unit may cause
a m a l f u n c t i o n o f t h e m a c h i n e .
 Fig.39: 1. A r e a w h e r e w a t e r s h o u l d n o t b e p o u r e d
NOTICE: Do not pour water on the machine while
the machine is in the upright position as shown
in the gure. If t h e m a c h i n e i s i n t h e u p r i g h t p o s i t i o n ,
water may pour down the motor unit, and cause a
m a l f u n c t i o n o f t h e m a c h i n e .
 Fig.40
Carrying the mower
CAUTION: Before carrying the mower, make
sure that the battery cartridges are removed.
When carrying the mower, hold the rear grip and the
l o w e r h o l d i n g p a r t a t t h e f r o n t o f t h e m a c h i n e w i t h t w o
people as shown in the gure.
 Fig.41: 1. L o w e r h o l d i n g p a r t 2. R e a r g r i p
Storing
CAUTION: W hen putting the machine in the
upright position, place the machine on a at and
stable surface. If t h e m a c h i n e i s p l a c e d o n a n u n s t a -
ble surface, the machine may fall over and cause an
injury.
Store mower indoors in a cool, dry and locked place.
Do n ' t s t o r e t h e m o w e r a n d c h a r g e r i n l o c a t i o n s w h e r e
the temperature may reach or exceed  C.
1. Remove the battery cartridge.
2. T u r n t h e k n o b 90° w h i l e p u l l i n g t h e k n o b o n t h e
l o w e r h a n d l e t o r e l e a s e t h e l o c k i n g p i n . P e r f o r m t h e
s a m e p r o c e d u r e o n t h e o t h e r s i d e , a n d t h e n f o l d t h e
handle.
 Fig.42: 1. Knob
NOTE: S u p p o r t i n g t h e h a n d l e m a k e s i t e a s i e r t o
r e l e a s e t h e l o c k i n g p i n w h e n p u l l i n g t h e k n o b .
3. T u r n t h e k n o b o n b o t h s i d e s 90° . M a k e s u r e t h a t
the knobs are securely xed.
 Fig.43: 1. Knob
NOTICE: Be careful not to pinch the cords when
folding the handle.
4. L o o s e n t h e t h u m b n u t s o n b o t h s i d e s , a n d t h e n
fold the upper handle as shown in the gure.
 Fig.44: 1. T h u m b n u t 2. U pperhandle
5. P l a c e t h e m a c h i n e i n t h e u p r i g h t p o s i t i o n .
NOTE: W h e n p u t t i n g t h e m o w e r i n t h e u p r i g h t p o s i -
tion, do not hold the handle only, but hold the mower
body and handle.
6. Store the grass basket as shown in the gure.
 Fig.45: 1. G r a s s b a s k e t
 Fig.46: 1. G r a s s b a s k e t