Malibukayaks Mini-X User manual

Reinforcement Installation
Mini-X
A. 3” x 2” x 8” (x1)
B. 3” x 2” x 5.5” (x2)
C. 3” x 2” x 5.75” (x4)
www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC.all rights reserved.
D. 3” x 2” x 4” (x2)
Align the center block (A) with
the center of the hull.
The center block (A) should be
positioned as shown in this
picture.
Now, place the blocks (B)
underneath the seat. Mount the
blocks securely onto the inner
grooves.
Each block (B) should be
positioned as shown in this
picture.
Insert block (A) between the cut
edge and seat groove. Push the
block to lock into place.
5
231
Place center block (A) below the
hatch opening.
6
4
1
A
B
B
A
B
B

Reinforcement Installation
Mini-X
C. 3” x 2” x 5.75” (x4)
D. 3” x 2” x 4” (x2)
Insert each block (C) underneath
the standing platform.
Insert the last pair of blocks (D)
underneath the footwell,
between the scupper holes.
Make sure each block (D) is
tightly positioned as shown in
this picture.
Check the blocks (C) are tightly
fixed between the groove and
below the standing platform
area.
29
Pull and squeeze each block (C)
onto the outer grooves.
Mount these blocks (D) onto the
inner grooves. Push each block
securely into place.
8
www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC.all rights reserved.
7
1210 11
2
c c
cc
D
D
D
D