Malibukayaks X-Factor User manual

Align the center block (A) with
the center of the hull.
Now, place the blocks (B)
underneath the seat. Mount the
blocks securely onto the inner
grooves.
Each block (B) should be
positioned as shown in this
picture.
Insert block (A) between the cut
edge and seat groove. Push the
block to lock into place.
5
23
Place center block (A) below the
hatch opening.
A
B
B
B
B
6
4
The center block (A) should be
positioned as shown in this
picture.
4
A
4
1
6
B
B
A. 3” x 2” x 8” (x1)
A
1
www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC.all rights reserved.
Reinforcement Installation
X-Factor
B. 3”x 2” x 4 ¾” (x2)
C. 3”x 2” x 4 ½” (x4)

Reinforcement Installation
X-Factor
Insert the last blocks (C)
underneath the footwell,
between the scupper holes.
Make sure each block (C) is
tightly positioned as shown in
this picture.
Mount these blocks (C) onto the
outer grooves. Push each block
securely into place.
www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC.all rights reserved.
7 8
2
C
C
C
C
C
C
C
C
9
2
www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC.all rights reserved.
www.malibukayaks.com [e-mail] 1-877-952-9257
Malibu Kayaks LLC.all rights reserved.
Reinforcement Foam Blocks Template
X-Factor
Use the template as a reference to measure
and cut the foam blocks.

www.malibukayaks.com [email protected] 1-877-952-9257
Malibu Kayaks LLC.all rights reserved.
A ( x1 )
B ( x2)
X-Factor
C ( x4 )
3” x 2” x 8”
Reinforcement Foam Blocks Template
3”x 2” x 4 ¾” 3”x 2” x 5 ⁄”