Mammoth Pro 120L User manual

Assembly Instructions
One Person Assembly
Close tent zip top to bottom as shown.
Fit equipment hanger ends to poles.
Position equipment hangers as required.
Step 5
Step 6
Equipment Hangers
Upper Equipment Hanger
Lower Equipment Hanger
Close tent zip
starting top right as shown.
Equipment
Hanger End
Parts List
3-Way
Corner
x8
Equipment
Hanger Ends
x8
Assembly Guide
Pro 120L
Mammoth
Pro 120L
mammothtents.nl
Yellow Pole
x6
Blue Pole
x4
Green Pole
x5
Black Pole
x4
+
+

Organise poles and connectors into their colours and groups.
Unzip and lay out tent.
Locate floor section and lay flat with edge sections vertical.
Assemble floor poles and 3-way corners.
Insert lower wall poles (chamfered end) into 3-way corners.
Insert upper wall poles (shrunk end) into lower poles.
Fit 3-way corners on top.
Lift tent over roof as shown.
Step 1
Step 2
Step 3
Step 4
Insert ceiling poles into top 3-way corners.
3-Way Corner
3-Way Corner