Mammoth Classic + 60 User manual

mammothtents.nl
One Person Assembly
Assembly Instructions
Parts List
Step 5
Step 6
Classic 60 80 100 120 150
+
Assembly Guide
60, 80, 100, 120, 150
Mammoth
+
Classic
Equipment Hangers
Upper Equipment Hanger
Lower Equipment Hanger
3-Way
Corner
x8
Equipment
Hanger Ends
x6
Blue Pole
x4
Yellow Pole
x11
Black Pole
x4
Close tent zip
starting top right as shown.
Close tent zip top to bottom as shown.
Fit equipment hanger ends to poles.
Position equipment hangers as required.
Equipment
Hanger End

Step 1
Step 2
Step 3
Step 4
3-Way Corner
Organise poles and connectors into their colours and groups.
Unzip and lay out tent.
Locate floor section and lay flat with edge sections vertical.
Assemble floor poles and 3-way corners as shown.
Insert lower wall poles (chamfered end) into 3-way corners.
Insert upper wall poles (shrunk end) into lower poles.
Fit 3-way corners on top.
3-Way Corner
Insert ceiling poles into top 3-way corners.
Lift tent over roof as shown.