Manhattan Comfort Tribeca TV Panel User manual

Tribeca TV Panel 35.43

Before starting
Prepare the room before starting the assembly,
leaving it completely clean and the area in
good condition to start the work.
Use the cardboard of the packaging and
the foam sheets protection to separate and
support the parts removed from the boxes.
44
Lb
1
Dimension:
W: 35.43" H: 35.43" D: 7.08"
QUANTITY OF PEOPLE
TO ASSEMBLE THIS
FURNITURE
REQUIRED TOOLS
4Lb

05
PART DESCRIPTION QUANTITY
01 LOWER PANEL 01
02 TOP PANEL 01
03
BACK SUPPORT
01
04
PANEL SUPPORT
02
05
WALL SUPPORT
01
06
SHELF
01
01
02
04
04
03
2
05
06
A
DE G
HARDWARE
12x B04x C01x
01x F02x
D01x
02x
GLUE
H06x
FRONT VIEW REAR VIEW

STEP 3
3
STEP 2
- Insert hardware (H) into parts (01 and 02).
STEP 1
- Join the panels (01 and 02) correctly aligning the edges, avoiding gaps between the parts and connect them
with the steel plate (C) and bolts B.
03
- Fix the piece (03) in the top panel (02) with bolt (A).
E
03
USE GLUE (E) ON THE FACE CONTACT
OF THE PIECE (03) BEFORE FIXING
AT THE PANEL (02).
A
A
A
A
A
04X
C
B
B
B
B
01
02
C+4B
H
H
H
H
H
04X
- Fix the parts (04) behind the panel (01 and 02) with bolt (A), observing the right position of the finished edges
and correctly aligning as show in the drawing.
A
A
A
A
A
A
A
A
04
04
A
08X
DETAIL
04
H
H

STEP 5
4
STEP 4
06
With a pencil and measuring
tape mark the height to
fasten the part (06) on the wall.
STEP 6
05
01X
D
G
G
G
02X
- Connect the shelf (05) in the top panel (02) with the
bolts (G) and dowels (H).
- Insert the plastic part (D) in the panel (01).
H
02X
Drill the wall with one twist bit drill of
1/2 inches.
H
t (F):
o
w
the drywall toggle bol
to use
To push against
the wall
Insert the bolt and toggle
into hole
H
H

5
- Verifying all the supports you are
ready to hang your TV panel on the wall.
STEP 7
STEP 8
05 F02X
F
F
06
Fasten the part (06) on the wall and
keep the 45° degree cut to up side.
Toggle bolt screw