Manhattan Comfort 204GMC User manual

204GMC
V.08192022

02
Before beginning the assembly process,
ensure all boxes and parts have been delivered.
STOP!
FOR BEST RESULTS:
Do not throw away packaging materials until assembly is complete.
Assemble item on a soft surface, such as cardboard or carpet, to protect finish.
Proper assembly requires two people.
SUPPORT SITE
View our assembly video online
WWW.MANHATTANCOMFORT.COM
Stuck? Question? We are here to help.
tel: [phone]
e-mail: [email protected]
TOOLS REQUIRED

Included in this package:
01. Base
02. Left Side Panel
03. Right Side Panel
04. Top Panel
05. Back Panel
06. Front of Drawer
07. Side of Drawer - Left
08. Side of Drawer - Right
09. Back of Drawer
10. Bottom of Drawer
11. Left Leg
12. Right Leg
13. Rear Leg
14. Front Bar
15. Rear Bar
01
01
01
01
01
03
03
03
03
03
01
01
02
01
01
03
10
09 08
07 06

Included in this package:
A - x25 B - x14 C - x06 D - x01
E - x25 F - x25 G - x12 H - x06 I - x30
J - x25
Where to find the items:
04
BOX - 1
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
A
B
C
D
E
F
G
H
I
J
K
L
M
K - x04 L - x01 M - x01

Rear view
05
Weight capacity:

Connect the parts 13
onto the parts 02 and 03
with the hardware (A).
A = 06x
Apply the hardware (E) into the parts 11, 12 and 14.
E = 09x
06
Step 01
Step 02
02

Connect the part 15
onto the part 01
with the hardware (A).
A = 03x
F = 03x
J = 03x
Apply the hardware (J) onto the hardware (F).
Connect the part 14 onto the part 01 with the hardware F.
Step 03
Step 04
07
01
14
01
14
15

Connect the part 02
onto the part 01
with the hardware (A).
A = 02x
Connect the part 03
onto the part 01
with the hardware (A).
A = 02x
Step 05
Step 06
08
01
03

Connect the part 11 onto the part 02 with the hardware F.
F = 03x
J = 03x
Connect the part 12 onto the part 03 with the hardware F.
F = 03x
J = 03x
Apply the hardware (J) onto the hardware (F).
Apply the hardware (J) onto the hardware (F).
Step 07
Step 08
09
02
11
03
12

Apply the hardware (E) into the part 04.
E = 04x
Apply the hardware (J) onto the hardware (F).
Connect the part 04 onto the parts 02 and 03
with the hardware F.
F = 04x
J = 04x
Step 09
Step 10
10

K = 04x
I = 30x
Connect the part 05 with the hardware I.
Apply the hardware (K ) into
the parts 11, 12 and 13.
Step 11
Step 12
11

Apply the hardware (E) into the part 06.
E = 12x
Connect the parts 07, 08 onto the part 06 with the hardware F.
F = 12x
J = 12x
Apply the hardware (J) onto the hardware (F).
Step 13
12
Step 14
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.

Apply the part 10 in the groove of the parts 07, 08 until the groove of the part 06.
Connect the part 09 onto the parts 07, 08 with the hardware (A).
A = 12x
Step 15
Step 16
13
10
08 06
07
09
08
07
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.

G = 12x
B = 12x
Apply the hardware (C + H) onto the front of the drawer.
C = 06x
H = 06x
Apply the hardware (B + G) into the groove of the part 06 and 09 as shown
on detail.
Step 17
Step 18
14
09
06
09
06
06
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.
Attention:
Assemble item on a soft surface,
such as cardboard, Styrofoam board
or carpet to avoid damage.

Step 19
First, approach the furniture as close as possible to
the wall.
Then, pass the hardware (L) through the hole of the part (05) from inside
to the outside as shown in the figure above until it reaches the wall.
Attention! Tipover system.
15

Step 20
You will need a pencil to mark where you should drill the wall with a
3/8" drill bit to put in the hardware (M).
Press the wings of the hardware (M) and put it in to the hole that you drilled
on the wall.
Use the 3/8" drill bit to drill the wall.
M = 01x
Attention! Tipover system.
16

Step 21
*Hardware (M) plugged
in the wall.
Connect the hardware (L) on the wall, using the hardware (D).
Connect the hardware (L), under the part 04 with the hardware (B).
B = 02x
D = 01x
Attention! Tipover system.
17

319 Ridge Rd. Dayton, NJ 08810
908-888-0818
All Manhattan Comfort furniture products are warranted, to the original purchaser at the
time of purchase and for a period of 30 days thereafter.
Our warranty is limited to new products purchased in factory sealed cartons. This wa-
ranty is valid in the United States of America and Canada.
In order to provide you with timely assistance, please thoroughly inspect your furniture
for missing or defective parts immediately after opening the carton.
Manhattan Comfort offers a 30-day parts replacement warranty on all items.
Our furniture products are no intended for outdoor use.
WARRANTY POLICY
THE WARRANTY DOES NOT COVER:
- Defects/damages by improper assembly or disassembly.
- Defects/damages caused by shipping. Claims for damage during transit shoud be
placed immediately to the transportation company.
- Defects/damages caused by inappropriate use of the furniture.