Manhattan Comfort 222BMC1 User manual

Ed. 002, 2019/07 - Manhattan Comfort.
888-230-2225
[e-mail]
Astor Floating Panel 70.86
Model # 222BMC1, 222BMC12, 222BMC2, 222BMC21,
222BMC6, 222BMC8, 222BMC9, 222BMC94
44
lb
The indicated values consider static weights and evenly distributed over the parts.
11
lb
11
lb
11
lb
11
lb

n.° ID Parts Identification (Description) Quantity
REAR VIEW
2
INCLUDED IN THE PACKAGE
01
11
11
10
05
06
06
04
08
09
13
12
01
02
03
04
05
06
07
08
09
10
11
12
13
Middle Shelf
Handle 128mm
Side Panel of the niche
Plastic rail profile 1755mm
Panel
Lower Rear Bar
Upper Rear Bar
Lower Support
Base of the niche
Partition of the niche
Sliding Door
Lower Shelf
Bar for wall
1
2
2
1
1
2
1
1
1
1
2
2
1
For fixing
on the wall
For fixing
on the wall
03 For fixing
behind the panel
02
For fixing
behind the panel
03
For fixing
behind the panel
02 For fixing
behind the panel
07

3
INCLUDED IN THE PACKAGE
TOOLS NEEDED
Simple hammer.Simple and phillips
screwdriver.
Drilling machine and electric screwdriver with
drill bit Ø1/2 inch and phillips tips.
Level indicator.
!IMPORTANT! Two people are needed to assemble this product.
8x
A2x B20x
C
20x
D14x E6x F
6x
G6x
H4x I
1x
J4x K

STEP 2
4
• Line the floor with the foam mantle of the packing to protect
the parts and arrange the Panel (01) with the rear face upwards,
correctly checking it the position according the holes and as
shown in the drawing.
• Position the Upper Rear Bars (02) and
the Lower Rear Bars (03) behind the
Panel (01) with dowels (A) and glue
according to the drawing, and fix them
applying the indicated bolts (D).
STEP 1
02
01
Rear face
ATTENTION!
APPLY GLUE.
ATTENTION!
APPLY GLUE.
03
02
03
• Finish the fixing of the Upper Rear Bars (02)
in the Panel (01) applying the two bolts (D)
in the indicated positions in the drawing.
• Fix the Lower Shelf (10) in the Panel (01)
with dowels (C) and bolts (E).
• Insert the plastic cover (J) into the hole
for pass wires in the Panel (01).
01
Front face
10
STEP 3
Preparing/Fixing the parts (04), (05), (06) and (07):
• Fix the Lower Support (04) under the Base of the niche (05)
with dowels (C) and bolt 5.0 x 50mm (E).
• Fix the Side Panels (06) and the Partition (07) on the Base of
the niche (05) with dowels (C) and Minifix hardware (F + G).
At the end of the fixing, apply the adhesive covers (H).
• Insert the plastic rail (12) into the channel in the Base (05).
06
07
05
04
12
06

STEP 5
STEP 4
5
STEP 6
08
13
Preparing the Sliding Door (08):
• Apply the plastic guides (I).
• Choose the outer face of the Door (08) and
fix the handle (13) with bolts 3.5 x 25mm (D).
05
12
12
09
04
06
06
07
08
Installing the Sliding Door (08) and fixing the Middle Shelf (09):
• Insert the plastic rail (12) into the channel under the Middle Shelf (09).
• Insert the dowels (C) in the Side Panels (06) and in the Partition (07) and the Minifix bolts (F) in the Middle Shelf (09). After that, fit the parts together.
• Install the Sliding Door (08) by attaching the guides (I) in the rails (12) in the Base (05) and in the Middle Shelf (09).
• Finish the fixing the Middle Shelf (09) to the Side Panels (06) and to the Partition (07) with dowels (C) and Minifix hardware (F + G), and finally apply
the adhesive covers (H).
10 01
05
09
04
06 07 06
• Install the niche [parts (04), (05), (06), (07), (08) and (09), assembled in the STEP 5], positioning it on the Lower Shelf (10) and fixing the Base (05)
and the Middle Shelf (09) on the Panel (01) with dowels (C) and bolts 5.0 x 50mm (E).
• Apply bolt 5.0 x 50mm (E) to fix the Lower Shelf (10) in the Lower Support (04).

STEP 7
ATENTION!
Before installing the panel, check the conditions
of the wall for strength to properly support and
anchor the weight of the suspended furniture,
including equipment and objects that may be
fixed to the panel.
The Kap Toggle bushings (K) supplied with the
product are for hollow walls or dry wall type.
Check the type of wall on which the installation
will be made and, if necessary, look for more
suitable bushings or fastening systems.
To mark the position and fix the Bars (11) on
the wall, check the level of the parts.
• Mark the position of the holes on the wall to
fix the Bars (11), as shown in the drawing
and using the bars themselves as reference.
• With drilling machine and drill bit Ø1/2 inch,
make the holes in the wall.
• Apply the bushings (K) into the holes in the
wall and fix the Bars (11) with the bevelled
edge facing up and to the wall, applying the
bolts 1/4 x 2.1/4" as indicated in the drawing.
1/2" hole
in the wall
Kap Toggle
bushing (K)
Bolt
1/4 x 2.1/4"
*The height of 23.00 inches (584mm) indicated
in the drawing, between the floor and the lower
edge of the Bars (11) is only suggestive to install
the Panel with its lower edge at approximately
12.00 inches (305mm) from the floor.
DETAIL 1
23.00 inch (584mm)*
11
Minimum fixing distance
of the Bar (11) for the
panel installation
close to walls corner.
11
6
3.75 inch
(95mm)
20.87 inch
(530mm)
STEP 8
• With the Panel already assembled, fit the
Bars (02) fixed behind the panel in the Bars
(11) fixed on the wall.
• At the end of the installation, apply the two
security bolts (D) in the indicated holes, to fix
the Panel (01) in the Bars (11) fixed on the
wall and prevent movement and accidentally
dropping the panel.
IMPORTANT! To remove the panel from the wall, to unscrew
the security bolts (D) applied as in STEP 08 and moving it
upwards slightly so as to disengage the chamfered edges of the
Bars (02) and (11) fixed behind the panel and on the wall.
Before moving the panel, remove TV and other objects that are
installed or ensure that the entire set is safe, preventing falls
and damage to the panel and equipment .
02
Fixed behind
the panel.
10
01
02 Fixed behind
the panel.
05
09
08
06
11
Fixed on
the wall
11
Fixed on
the wall