Manhattan 179119 User manual

HI-SPEED
USB 2.0
SVGA
CONVERTER
USER
MANUAL
MODEL 179119
MAN-179119-UM-0608-01

Thank you for purchasing the MANHATTAN®Hi-Speed USB 2.0 SVGA
Converter, Model 179119.
Designed to help increase productivity, improve desktop arrangements
and extend the visual work area across dual monitors, this device
makes word processing, editing and multi-tasking more effective with
less-overlapped windows, fewer hidden palettes and better-organized
views. Users can read e-mail on one monitor and open attachments
on the other. Large, complicated spreadsheets can be expanded and
viewed without scrolling.
Presentations are made more compelling with another monitor for more
impact or viewing speaker notes on a separate display. The MANHATTAN
Hi-Speed USB 2.0 SVGA Converter supports resolutions of up to 1280
x 1024 in 16-bit or 32-bit color, and its 16 MB SDRAM memory easily
enhances the workspace without complicated installations or expensive
equipment.
The easy-to-follow instructions in this user manual help make setup and
operation relatively simple, so you’ll soon be enjoying the benets of
these additional features:
• Primary, extended and mirror functions provide display continuity and
dual views
• Portable and connects to any USB port without conicts or external
power supplies
• Plug and Play; Windows compatible
• Lifetime Warranty
System Requirements
• Compatible with Windows 2000/XP/Vista and Win CE (with host
device support)
• Available Hi-Speed USB 2.0 port
Package Contents
• Hi-Speed USB 2.0 SVGA Adapter
• Quick install guide and driver CD with user manual
SAFETY & COMPLIANCE STATEMENTS
FCC
This equipment has been tested and found to comply with FCC Part 15
Subpart B § 15.109/15.107 Class B. Operation is subject to the following
two conditions: 1) This device may not cause harmful interference; and
2) this device must accept any interference, including interference that
may cause undesired operation of the device.
2

CE
This equipment is in compliance with the requirements of the following
regulations: EN 55022 Class B (2006); EN 55024 (1998+A1:2001+
A2:2003), (IEC/EN 61000-4-2 [1995+A1:1998+A2:2001)/-3(2006]).
C-Tick
This equipment is in compliance with the requirements of the following
regulations: EN 55022 (2006) Class B, AS/NZS CISPR22 © IEC: 2005.
VCCI
This equipment is in compliance with the requirements of the following
regulations: CISPR22 © IEC: 2005.
DRIVER INSTALLATION
Installing the device driver enables your computer’s operating system
to recognize the Hi-Speed USB 2.0 SVGA Converter once it’s connected.
Check your operating system and refer to the appropriate installation
procedure below to begin installing the device driver. IMPORTANT:
• Unplug the Hi-Speed USB 2.0 SVGA Converter from your PC or
notebook before executing any setup or un-install program.
• Make sure you connect the display device to the VGA (DB15)
connector of the Hi-Speed USB 2.0 SVGA Converter and switch it
on before plugging the converter into an available USB 2.0 port on
your PC or notebook.
WindoWs 2000/XP
1. Insert the enclosed driver CD into the CD-ROM drive. The setup
program should be launched automatically; if not, go to Start, then
Run, and then double-click “D:\Setup.exe” (where D: is the path of
your CD-ROM drive).
2. When the InstallShield
Wizard welcome screen
displays, click “Next” to
continue.
3

3. When the License
Agreement screen
displays, read it and
select “I accept the
terms of the license
agreement.” Click
“Next” to continue.
4. When the
InstallShield Wizard
Complete screen
displays, select “Yes,
I want to restart my
computer now.”
Click “Finish” to
complete the driver
installation.
5. Connect the external display device (monitor/projector) to the VGA
(DB15) connector of the Hi-Speed USB 2.0 SVGA Converter and
switch it on.
6. After rebooting the computer, plug the converter into an available
USB 2.0 port on your PC or notebook. The extended display will be
shown on the second display device.
Verifying Driver Installation (2000/XP)
On the desktop, right-click My Computer → Properties → Hardware →
Device Manager; then double-click “Display adapters” and “Universal
Serial Bus controllers.”
“Universal Serial Bus controllers” should feature:
• “USB 2.0 Graphics Card”
“Display adapters” should feature:
• “USB 2.0 Graphics Card-Extend”
• “USB2.0 Graphics Card-Mirror”
4

Driver Un-Install (2000/XP)
1. On the desktop,
go to Start →
Settings (Classic
start menu) →
Control Panel →
Add or Remove
Programs.
2. Select “USB 2.0
Graphics Card
(Trigger) (driver
version number)”
and click
“ Remove.”
5

3. Disconnect the Hi-
Speed USB 2.0
SVGA Converter and
click “OK” to continue.
4. Select “Yes, I want to
restart my computer
now” and click
“Finish” to reboot.
After rebooting,
the driver un-install
procedure will be
complete.
WindoWs Vista
1. Insert the enclosed driver CD into the CD-ROM drive. The setup
program should be launched automatically; if not, go to Start, then
Run, and then double-click “D:\Setup.exe” (where D: is the path of
your CD-ROM drive).
2. When the InstallShield
Wizard welcome
screen displays, click
“Next” to continue.
6

3. When the License
Agreement screen
displays, read it and
select “I accept the
terms of the license
agreement.” Click
“Next” to continue.
4. The Hi-Speed USB 2.0
SVGA Converter is
conguring your new
software installation...
... and is searching for
installed features.
5. Select “Yes, I want to
restart my computer
now” and click
“Finish” to complete
the driver installation.
7

6. After rebooting the computer, plug the Hi-Speed USB 2.0 SVGA
Converter into an available USB 2.0 port on your PC or notebook.
The extended display will be shown on the second display device.
Verifying Driver Installation (Vista)
On the desktop, right-click My Computer → Properties → Device
Manager; then double-click “Display adapters” and “Universal Serial
Bus controllers.”
“Universal Serial Bus controllers” should feature:
• “USB 2.0 Graphics Card”
“Display adapters” should feature:
• “USB 2.0 Graphics Card-Extend”
• “USB2.0 Graphics Card-Mirror”
8

Driver Un-Install (Vista)
1. On the desktop,
go to Start →
Control Panel
→ Programs
and Features.
2. Select “USB 2.0
Graphics Card
(Trigger)
(driver version
number)” and click “ Uninstall.”
3. Disconnect the Hi-
Speed USB 2.0
SVGA Converter and
click “OK” to continue.
4. Select “Yes, I want
to restart my
computer now” and
click “Finish” to
reboot. After
rebooting, the
driver un-install
procedure will be
complete.
FUNCTIONS
The Hi-Speed USB 2.0
SVGA Converter works
with LCD or CRT
monitors. Click the UVT
icon to choose one of
three modes: Primary,
Extended and Mirror
(plus an Off option).
9

Clicking the UVT icon also
provides access to the
Resolution options, which
can be changed here or by
going to Display Properties/
Settings.
NOTE: All Windows 2000/
XP/Vista resolution settings
are formatted with a 4:3
aspect ratio except for
1280 x 1024, which is 5:4.
(1024 x 768 is the best
choice for viewing DVDs.)
Win CE settings are also
4:3 except for 800 x 480,
which is 15:9.
Primary mode
The system’s main graphics adapter will automatically switch to act
as the secondary graphics adapter, and the main screen will now
work as the extended desktop. The monitor that’s connected to the
10

Hi-Speed USB 2.0 SVGA Converter will now act as the primary
Windows desktop. NOTE: Some display utilities and drivers found
with certain AGP and built-in display adapters may prevent this option
from working on some systems. You can disable the other utility
program (usually in the same toolbar located on the bottom-right
corner of the desktop) to make this function work properly .
eXtended mode
By default, the monitor connected to the Hi-Speed USB 2.0 SVGA
Converter will work as the “extended” desktop, which expands the
primary Windows desktop of your system. You can change the relative
position of this extended desktop in Display Properties/Settings.
mirror mode
In this mode, the Windows desktop will be replicated, or “mirrored,” to
the secondary CRT/LCD monitor. The screen resolution setting on the
secondary monitor will follow the primary screen’s resolution. If the
selected resolution setting is not supported by the primary screen,
however, a warning dialog box will be displayed and the suggested
screen resolution will be shown.
off
This option simply disables the Hi-Speed USB 2.0 SVGA Converter.
11

FAQ
Following are some frequently asked questions — and answers —
regarding the installation or operation of the Hi-Speed USB 2.0 SVGA
Converter .
Q: Why can’t I make the Hi-Speed USB 2.0 SVGA Converter the
primary display?
A: Some video card manufacturers include a utility that prevents other
video cards from being set as the primary card. Check the bottom-
right corner taskbar for the utility, and disable the utility before
designating the Hi-Speed USB 2.0 SVGA Converter as the primary
display.
Q: Why won’t my DVD player work when I move it over to the
extended display?
A: Some DVD playback software packages don’t support playing on a
second display adapter of any kind. You can try opening the program
in the secondary display rst before playing the DVD.
Q: How come my video won’t play on Media Player if I move it
over to the extended desktop?
A: Check that you’ve moved the Media Player window completely
over to the second screen.
Q: Why doesn’t my mouse move past the right side of the screen
as it should on an extended desktop?
A: Check the display settings and make sure that your display No. 2 is
on the right side of display No. 1. You can rearrange how Windows
treats displays in relation to each other in Display Properties/Settings.
Q: Why are there are lines running horizontally up and down my
screen?
A: This is due to a low refresh rate setting. You can change this by
going to Display Properties/Settings → Advanced Settings. NOTE:
Make sure you select the USB 2.0 VGA device rst and not set the
refresh rate higher than what your monitor can support, as this can
damage your monitor. You can also try to reset/refresh/resynchronize
your monitor.
Q: Why doesn’t Direct3D work?
A: This is a current limitation of the Hi-Speed USB 2.0 SVGA Converter .
Check for driver updates in the future to add support for this. If
your application requires this, use the main display adapter.
12

OPERATION TIPS
Following are some tips that may help if you are experiencing any
difculties using the Hi-Speed USB 2.0 SVGA Converter . Contact your
dealer for additional assistance, if needed.
•Check to make sure that all connectors are plugged in correctly.
•Make sure that the USB port that you are using is USB 2.0.
•Try a different USB 2.0 port and/or computer.
•Check to see that the monitor is connected correctly and the power
is on.
•Try connecting the adapter directly to the computer instead of
through a hub.
•Unplug all other USB devices from the system.
•Make sure to restart your computer after the driver installation.
•Unplug the adapter and re-insert it.
•Check the Web site to make sure you have the latest drivers.
•Reset/refresh/resynchronize your monitor.
•Selecting Primary mode may disable the main system display on
certain Intel graphics solution-based computer systems.
•If you have problems during the boot-up process, start your
computer in Safe mode and un-install the driver. Hold the CTRL key
until the Windows startup menu appears and select “Safe Mode.”
• To verify the driver version that you installed, go to Control Panel →
Add or Remove Programs to check the program: USB 2.0 Graphics
Card (Trigger) 8.1.0.0516.0146 (the number is the driver version).
13

SPECIFICATIONS
Standards and Certications
• Hi-Speed USB 2.0
• EHCI
• CE
• FCC
General
• Chipset: MCT Trigger
• Display memory: 16 MB SDRAM
• Bus-powered
• Connections: USB type A male; HD 15 female
• Supports Suspend and Wake modes
Supported resolutions
• For Windows:
- 5:4; 1280 x 1024; 16/32 bits
- 4:3; 1024 x 768; 16/32 bits
- 4:3; 800 x 600; 16/32 bits
- 4:3; 640 x 480; 16/32 bits
• For Win CE:
- 4:3; 800 x 600; 16/32 bits
- 15:9; 800 x 480; 16/32 bits
- 4:3; 640 x 480; 16/32 bits
Physical
• Case material: ABS plastic
• Dimensions: 3.25 x 1.5 x 0.75 in. (8 x 4 x 2 cm.)
• Cable: (50 cm) (19 in.)
• Weight: 2.8 oz. (79 g)
System Requirements
• Windows 2000/XP/Vista and Win CE (with host device support)
• Available Hi-Speed USB 2.0 port
Package Contents
• Hi-Speed USB 2.0 SVGA Adapter
• Quick install guide and driver CD with user manual
14

www.manhattan-products.com
Copyright © MANHATTAN
All products mentioned are trademarks or registered trademarks of their respective owners.
MANHATTAN®offers a complete line of PC Components, Peripherals, Cables
and Accessories. Ask your local computer dealer for more information
or visit us online at