Manhattan 179133 User manual

HI-SPEED
USB 2.0 DVI
CONVERTER
QUICK
INSTALL
GUIDE
Model 179133
MAN-179133-QIG-0708-02

3
Thank you for purchasing the MANHATTAN
®
Hi-Speed USB
2.0 DVI Converter, Model 179133.
This quick install guide presents the rudimentary steps
required to set up and operate this device.* For detailed
instructions and specications, refer to the user manual
1) on the CD enclosed with this product; 2) on the Web site
listed below; or 3) in some cases, printed and enclosed with
this product. Contact your MANHATTAN dealer with comments
or questions, or visit www.manhattan-products.com for
information on the latest software and rmware updates,
related products and additional contact information.
Important Pre-Installation Notes:
• Unplug any USB 2.0 VGA adapter connected to your PC
or notebook computer before executing the Hi-Speed
USB 2.0 DVI Converter setup or un-installation program.
• An AC power adapter is required for an external USB hub.
The driver allows up to six Hi-Speed USB 2.0 DVI
Converters on one PC.
• Connect the display device to the DVI connector of the
Hi-Speed USB 2.0 DVI Converter and switch the display
device on before plugging the converter into an available
USB 2.0 port of the PC or notebook computer.
• Do not reboot the computer until all converters are installed.
* Some screen images have been modied to t on page. Windows 2000/
XP screen images are shown; Vista/7 screen images are similar.

4
DRIVER INSTALLATION
1. Insert the driver/user manual CD into the CD-ROM drive.
The setup program should be launched automatically.
Or, double-click “D:\setup.exe” (where “D:” is the path of
your CD-ROM drive) and follow the instructions.
2. Click “Finish” to exit the driver install wizard.
3. Connect the external display device (monitor/projector)
to the Hi-Speed USB 2.0 DVI Converter and switch the
display device on. Then plug the converter into an
available USB 2.0 port on your PC or notebook computer.
4. If installing only one Hi-Speed USB 2.0 DVI Converter,
select “Yes, I want to restart my computer now,” click
“Finish,” the proceed to Step 7 to complete the driver
installation. If installing more than one converter, proceed
to Step 5.
5. Select “No, I will restart my computer later” and click
“Finish” to continue installing additional converters as
instructed above.
6. To complete the driver installation, select “Yes, I want
to restart my computer now” and click “Finish” to restart
the computer.
7. After rebooting the computer, the extended display will
be shown on the display device.

5
INSTALL VERIFICATION
Right-click My Computer, and go to Properties ¨ Hardware
¨ Device Manager. Double-click “Display adapters” and
“Universal Serial Bus controllers.”
• A single Hi-Speed USB 2.0 DVI Converter installation
should appear like this (without the truncated list):

6
• A multiple Hi-Speed USB 2.0 DVI Converter installation
should appear like this (without the truncated list):

7
DRIVER UN-INSTALLATION
Make sure the Hi-Speed USB 2.0 DVI Converter is unplugged
from the PC or notebook computer before executing the
device driver un-installation program. For details on the
procedure, refer to the user manual on the CD.

Copyright © MANHATTAN
All products mentioned are trademarks
or registered trademarks of their respective owners.
www.manhattan-products.com
MANHATTAN®offers a complete line
of PC Components, Peripherals, Cables and Accessories.
Ask your local computer dealer for more information
or visit us online at