Mania ILLUSIOLIGHT User manual

INSTRUCTION MANUAL
NIGHT LIGHT ILLUSIOLIGHT
COMPONENTS
•LED base
•Acrylic panel
•USB cable
•User manual
TECHNICAL SPECIFICATIONS
•Base material: ABS
•Light plate material: acrylic
•Power mode: USB/battery -> 3 x AA
(batteries not included)
•Input voltage: DC5V
•Light source: LED
•Light color: 7 different colors
•Switch mode: touch switch
•Product power: 3W
•Weight: 280g
•Base size: 100 x 40mm
FEATURES
1. Slot for acrylic panel
2. Touch button
3. USB power port
4. USB cable
5. Battery cover
6. Battery holder for 3 AA batteries
7. Acrylic panel
Remove the protective film from both sides of the
acrylic plate.
Place the acrylic plate in base.
Plug in the USB cable to power supply/computer
or insert batteries.
Press the power button to power the lamp on.
•1st touch gives a full spectrum of automatic
color mixing in gradient style.
•2nd touch will change the mode to switching
between 7 colors (slow)
•3rd touch will change the mode to switching
between 7 colors (fast)
•4th touch will change the color to cold white
•5th touch will change the color to red
•6th touch will change the color to green
•7th touch will change the color to dark blue
•8th touch will change the color to yellow
•9th touch will change the color to purple
•10th touch will change the color to light blue
•11th touch will change the color to cold white
Hold the touch button for 2 seconds to power the
lamp off.
IMPORTANT
To avoid the fingerprints on the acrylic plate and
assure that the effect of the 3D illusion is not
affected, please do not directly touch the acrylic
surface with your hand.
Please hold the acrylic plate on the sides:

Remark: Please use a soft cloth to clean acrylic if
there is a mark on the surface. Do not use abrasive
cleaners as will damage the surface.
Please tear off the protective film of the acrylic
before putting the acrylic plate on the base.
SAFETY PRECAUTIONS
1. This product is for indoor use only.
2. To insert batteries, remove the battery cover,
insert new batteries and place back the cover.
3. Rechargeable batteries are to be removed
from the product before being recharged and
should be recharged under adult supervision.
4. Do not mix standard and rechargeable
batteries or new and old batteries.
5. Always insert batteries with the correct
polarity.
6. Exhausted batteries are to be removed from
the product immediately.
7. Always switch the lamp off overnight or if left
unattended.
WARRANTY
The warranty is valid for 12 months, and you can
send your claim to the seller (us), through the
contact details listed in the bottom right corner. To
submit a warranty claim, send the order number
and date of your purchase.
WEEE disposal and recycling symbol.
The WEEE symbol is attached to the
product in compliance with the EU
directive 2012/19/EU on Waste
Electrical and Electronic Equipment
(WEEE). It is intended to deter the
improper disposal of this product and to
promote reuse and recycling.