Mantagua VALAN Manual
ENGLISH
VALAN
MOTORIZED LED SEARCHLIGHT
INSTRUCTION GUIDE
VALAN
MOTORIZED LED SEARCHLIGHT
Unit: inch [mm]
FEATURES:
Led Ligthing
Programmable handheld wireless remote controller
Wired remote controller
UV ray and Saltwater resistant
Robust searchlight made of black ABS and lens in PC
Power supply: 12 ou 24VDC
Low consumption: 36W
Beam span at 1000m (3280)
Luminous intensity: 350.000 Cd
Lighting power 5400 lm
Long lifespan
Vibrations resistant
Horizontal rotation: continuous 360°/135° Tilt
Vertical sweep: +65° à -65°
Temperatures: -30°C...+70°C
Weight : 2.4kg (5.3lb)
Dimensions : 182 x 193 x H 190mm (7.16 x 7.6 x 7.5n)
Certication : EN60945 (does not disturb AIS & VHF)
Important Notice: If VALAN DC power is cut o (wires disconnected fro battery or
power supply switched o), aer reconnected, make sure to turn on the searchlight,
using wireless or wired remote to make a full 360° rotation, in order to reset the home
position memory.
1. Operation
Press on/o button to switch on or o VALAN.
Operate directions of the light beam by pressing the directions buttons.
Up= Down= Right= Le=
2. Button : Dual speed (Fast/Slow speed switch)
OPERATION:
Handheld wireless remote
HANDHELD WIRELESS REMOTE PROGRAMMING PROCESS
1. Switch o DC Power or disconnect from battery.
2. Make sure there is NO other transmitter operating
at the same time.
3. Switch on DC Power, within 5 seconds press remote
up and down button once simultaneously.
4. VALAN will ash to acknowledge the remote,
connection has been made.
5. To program the second remote (up to 4 remotes
may be used with the VALAN, programming a
h will replace the rst), within ve seconds aer
the rst remote programmed, press the second remote up and down
button or repeat step 1.
RADIO FREQUENCY: 433.92 MHz
Wireless remote battery 23A x 2pcs
Wireless remote operation distance: 65M
Wired remote
WIRED REMOTE CONTROL
www.mantagua.fr
Wired remote control supplied with a 5 meters cable.
An additional 5 m cable can be ordered as an option.
Table of contents
