Marantz SR6006 User manual

SR6006 Home Theater Receiver
SR6006 Home Theater Receiver
AUDIO/VIDEO PROCESSING
ANALOG DEVICES: SHARC 32-bit Processor
 Dolby: True HD/Digital Plus&EX/Pro Logic IIz, IIx
Dolby: II/Virtual Speaker/Headphone
DTS: HD Master&High Res. Audio/ES/96/24/
DTS: Discrete&Matrix6.1/Neo:6/Express
DTS Neural Surround
Multi Ch Stereo
Audyssey MultEQ-XT Auto Calibration w/ MIC
Audyssey Dynamic EQ / Dynamic Volume / DSX
9 Band EQ, -20dB - +6dB
Independent Crossover Setting for each speaker
Lip-sync (digital audio delay) 0-200 msec
Volume Control Setting: Limit, Power On Vol
Mute Level, Display type (dB or 0-99)
HDMI and Analog to HDMI I/P Scaling
OSD output over HDMI
Individual Image Adjustments
Packed with features, the SR6006 delivers bold design, audiophile sound quality and advanced technology. A newly styled front panel, complete with
“star and circle” display, recalls the classic components that have made Marantz an audiophile favorite for decades. Analog/HDMI and HDMI/HDMI
scaling is fully supported, with a full suite of image quality adjustments being made available for each input. Built-in AirPlay compatibility allows you
to stream music wirelessly throughout your home from your iPhone, iPod Touch and iPad, just as you’re sure to enjoy streaming audio content from
online music services like Pandora, Rhapsody and Napster as well as from your own home network. Access thousands of Internet radio stations from
all over the world. Audyssey MultEQ-XT room correction, Dynamic EQ and Dynamic Volume deliver perfect sound in any room, while three zones of
audio and Dual HDMI outputs deliver commanding multi-room performance.
USER CONFIGURABLE FEATURES
Input Level Adjust
Input Assign (Component In/Digital In)
Input Rename
Input Skip
On Screen Display (TEXT)
Display Status Info.
Software Upgradable
MARANTZ AUDIO ADVANTAGE
All-discrete, 110w x 7 Class AB Output Stage
High Current Linear Power Supply
EI Core Power Transformer
Pure Direct / Source Direct
M-DAX (Marantz Dynamic Audio eXpander)
Front Bi-Amp Drive Capability (Speaker C)
Fully Discrete Amplification
192kHz/24-bit Audio DACS
 Three audio zones w/ Tone Control, Mono Mode and HPF
Dual PLL Anti-jitter Circuit
NETWORK FEATURES
 Ethernet port
 WEB Interface
 IP-based control, system backup/restore
DLNA1.5 certified
Stream audio and photos from all connected PC’s
vTuner Internet Radio w/ 14000 pre-loaded stations
Stream audio and photos from Internet:
Rhapsody
Pandora
Napster
Flicker
App Control
AUDIO/VIDEO CONNECTIONS
7.1 Channels
AM/FM/HD Radio Tuner
56Tuner Presets: Group A-G: each 8 channels
6 RCA Analog inputs (incl. Front RCA)
2 Optical, 2 Coaxial SPDIF Digital Inputs
7/2 HDMI ver.1.4a In/ Simultaneous Out
CEC (Control)
ARC (Audio Return Channel)
HDMI In Stand By
Auto Lip Sync.
Deep Color, x.v.Color
Pass through in Standby mode
2/1 Component In / Out
5/2 Composite In / Out
Front USB input for digital iPod Connection
7.1 Channel Input
Headphone Out
ADVANCED CONNECTIONS
iPhone/iPod Digital Connection
Bluetooth Wireless Audio Transmission Capability
External IR Receiver
Assignable HDMI / Component inputs
Marantz D-Bus(RC-5), Remote In / Out, RS232
7.2 Channel Preamp-Out
Speaker A or B Switching
Phono Input
Assignable 12V trigger

©2011 Marantz America, LLC · www.marantz.com
All specifications, dimensions and weights are subject to change without notice.
D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors
Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document.
SR6006 Home Theater Receiver
Audio Section
• Power amplifier
Rated output: Front:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Center:
110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Surround back:
110 W + 110 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)
Output connectors: (SPEAKER A+B: 8 Ω)
• Analog
Input sensitivity/Input impedance: 200 mV/47 kΩ
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT
mode)
S/N: 100 dB (IHF–A weighted, DIRECT mode)
Distortion: 0.005 % (20 Hz – 20 kHz) (DIRECT mode)
Rated output: 1.2 V
• Digital
D/A output: Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008 % (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 100 dB
Digital input: Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity: 2.5 mV
RIAA deviation: ±1 dB (20 Hz to 20 kHz)
S/N: 74 dB (A weighting, with 5 mV input)
Rated output: 150 mV
Distortion factor: 0.03 % (1 kHz, 3 V)
Video Section
• Standard video connectors
Input/output level and impedance: 1 Vp-p, 75 Ω
Frequency response: 5 Hz – 10 MHz — 0, –3 dB
(when “Video Convert” set to “OFF”)
• Color component video connector
Input/output level and impedance: Y (brightness) signal — 1
Vp-p, 75 Ω
PB / CB signal — 0.7 Vp-p, 75 Ω
PR / CR signal — 0.7 Vp-p, 75 Ω
Frequency response: 5 Hz – 60 MHz — 0, –3 dB (when “Video
Convert” set to “OFF”)
Tuner Section [FM] [AM]
(Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W)
Receiving Range: 87.5 MHz – 107.9 MHz 530 kHz – 1710 kHz
Usable Sensitivity: 1.5 μV (14.8 dBf) 20 μV
S/N: MONO 78 dB (IHF–A weighted, DIRECT mode)
STEREO 68 dB (IHF–A weighted, DIRECT mode)
HD 85 dB 85 dB
Total harmonic Distortion (at 1 kHz): MONO 0.1 %
STEREO 0.2 %
HD 0.02 % 0.02 %
General
Power supply: AC 120 V, 60 Hz
Power consumption: 650 W
0.2 W (Standby)
2.2 W (CEC standby)
For purposes of improvement, specifications and design are sub-
ject to change without notice.