Marantz PS3001 User manual

SR3001 / PS3001
Please use this service manual with referring to the user guide ( D.F.U. ) without fail.
Service
Manual
SR3001 / PS3001
SR3001 /N1B/N1G/N1S/U1B
Part no. 90M23CW855010
First Issue 2006.09
MZ
AV Surround Receiver
TABLE OF CONTENTS
SECTION PAGE
1. TECHNICAL SPECIFICATIONS ........................................................................................... 1
2. TECHNICAL DESCRIPTION ............................................................................................... 5
3. POWER AMPLIFIER ADJUSTMENT .................................................................................. 8
4. SERVICE MODE ................................................................................................................. 9
5. SYSTEM ERROR ................................................................................................................11
6. UPDATE FIRMWARE .........................................................................................................12
7. WIRING DIAGRAM .............................................................................................................19
8. BLOCK DIAGRAM ..............................................................................................................21
9. SCHEMATIC DIAGRAM .................................................................................................... 23
10. PARTS LOCATION ............................................................................................................ 37
11. EXPLODED VIEW AND PARTS LIST ............................................................................... 49
12. MICROPROCESSOR AND IC DATA.................................................................................. 54
13. ELECTRICAL PARTS LIST .................................................................................................61
14. ABOUT REPLACE THE MICROPROCESSOR WITH A NEW ONE .............................. 97
PS3001 /F N
AV Surround Amplifier
SURROUND
AV SURROUND RECEIVER SR3001
DOWN UP
VOLUME INPUT SELECTOR
PHONES
STANDBY
MUTE 7.1CH INPUT S. SPEAKER B ATT
PURE
SETUP DIRECT
SIMPLE
AUTO HT-EQ MENU
ENTER
DISPLAY MEMORY CLEAR
T-MODE EXIT BAND
MODE
DISP MULTI AUT O TUNED ST V – OFF NIGHT PEAK ANALOG
DIGITAL
ATT
SLEEP SURR AUTO DIRECT DISC6.1 MTX 6.1 EQ
DIGITAL
SURROUND
PCM
L
C
R
SL S SR
LFE
POWER ON/STANDBY
SURROUND
AV SURROUND AMPLIFIER PS3001
DOWN UP
VOLUME INPUT SELECTOR
POWER ON/OFF PHONES
STANDBY
MUTE 7.1CH INPUT S. SPEAKER B ATT
PURE
SETUP DIRECT
SIMPLE
AUTO HT-EQ MENU
ENTER
DISPLAY NIGHT SLEEP
V-OFF EXIT A / D
MODE
DISP V – OFF NIGHT PEAK ANALOG
DIGITAL
ATT
SLEEP SURR AUTO DIRECT DISC 6.1 MT X 6.1 SPKR A B EQ
DIGITAL
SURROUND
AAC
PCM
L
C
R
SL S SR
LFE
SR3001
PS3001
/F Only

MARANTZ DESIGN AND SERVICE
Using superior design and selected high grade components, MARANTZ company has created the ultimate in stereo sound.
Only original MARANTZ parts can insure that your MARANTZ product will continue to perform to the specifications for which
it is famous.
Parts for your MARANTZ equipment are generally available to our National Marantz Subsidiary or Agent.
ORDERING PARTS :
Parts can be ordered either by mail or by Fax.. In both cases, the correct part number has to be specified.
The following information must be supplied to eliminate delays in processing your order :
1. Complete address
2. Complete part numbers and quantities required
3. Description of parts
4. Model number for which part is required
5. Way of shipment
6. Signature : any order form or Fax. must be signed, otherwise such part order will be considered as null and void.
SHOCK, FIRE HAZARD SERVICE TEST :
CAUTION : After servicing this appliance and prior to returning to customer, measure the resistance between either primary AC
cord connector pins ( with unit NOT connected to AC mains and its Power switch ON ), and the face or Front Panel of product and
controls and chassis bottom.
Any resistance measurement less than 1 Megohms should cause unit to be repaired or corrected before AC power is applied, and
verified before it is return to the user/customer.
Ref. UL Standard No. 1492.
In case of difficulties, do not hesitate to contact the Technical
Department at above mentioned address.
060607MZ
USA
MARANTZ AMERICA, INC
100 CORPORATE DRIVE
MAHWAH, NEW JERSEY 07430
USA
EUROPE / TRADING
MARANTZ EUROPE B.V.
P. O. BOX 8744, BUILDING SILVERPOINT
BEEMDSTRAAT 11, 5653 MA EINDHOVEN
THE NETHERLANDS
PHONE : +31 - 40 - 2507844
FAX : +31 - 40 - 2507860
AUSTRALIA
QualiFi Pty Ltd,
24 LIONEL ROAD,
MT. WAVERLEY VIC 3149
AUSTRALIA
PHONE : +61 - (0)3 - 9543 - 1522
FAX : +61 - (0)3 - 9543 - 3677
NEW ZEALAND
WILDASH AUDIO SYSTEMS NZ
14 MALVERN ROAD MT ALBERT
AUCKLAND NEW ZEALAND
PHONE : [phone]
FAX :[phone]
THAILAND
MRZ STANDARD CO., LTD
746 - 754 MAHACHAI ROAD.,
WANGBURAPAPIROM, PHRANAKORN,
BANGKOK, 10200 THAILAND
PHONE : +66 - 2 - 222 9181
FAX : +66 - 2 - 224 6795
TAIWAN
PAI- YUING CO., LTD.
6 TH FL NO, 148 SUNG KIANG ROAD,
TAIPEI, 10429, TAIWAN R.O.C.
PHONE : +886 - 2 - 25221304
FAX : +886 - 2 - 25630415
MALAYSIA
WO KEE HONG ELECTRONICS SDN. BHD.
2ND FLOOR BANGUNAN INFINITE CENTRE
LOT 1, JALAN 13/6, 46200 PETALING JAYA
SELANGOR DARUL EHSAN, MALAYSIA
PHONE : +60 - 3 - 7954 8088
FAX :[phone]
KOREA
MARANTZ KOREA CO., LTD.
ROOM 604, ELECTRO OFFICE, 16-58,
HANGGANG-RO 3GA, YONGSAN-KU,
SEOUL, 140-013, KOREA
PHONE : +82 - 2 - 323 - 2155
FAX : +82 - 2 - 323 - 2154
SINGAPORE
WO KEE HONG DISTRIBUTION PTE LTD
No.1 JALAN KILANG TIMOR
#08-03 PACIFIC TECH CENTRE
SINGAPORE 159303
PHONE : [phone]
FAX : [phone]
CANADA
MARANTZ CANADA INC.
5-505 APPLE CREEK BLVD.
MARKHAM, ONTARIO L3R 5B1
CANADA
PHONE : 905 - 415 - 9292
FAX : 905 - 475 - 4159
JAPAN
D&M BUILDING, 2-1 NISSHIN-CHO,
KAWASAKI-KU, KAWASAKI-SHI,
KANAGAWA, 210-8569 JAPAN
D&M Holdings Inc.
CHINA
MARANTZ SHANGHAI TRADING LTD.
ROOM.506 SHANGHAI LIGHT INDUSTRY MANSION
1578 NANJING (WEST) ROAD SHANGHAI
CHINA
TEL : 021 - 6248 - 1064
FAX : 021 - 6248 - 3565

1
FM TUNER SECTION
Frequency Range ....................................... 87.5 - 108.0 MHz
Usable Sensitivity .................................. IHF 1.8 µV/16.4 dBf
Signal to Noise Ratio..........................Mono/Stereo 75/70 dB
Distortion ........................................... Mono/Stereo 0.2/0.3 %
Stereo Separation............................................... 1 kHz 45 dB
Alternate Channel Selectivity ...................... ± 300 kHz 60 dB
Image Rejection............................................... 98 MHz 70 dB
Tuner Output Level ..................1 kHz, ± 75 kHz Dev 800 mV
AM TUNER SECTION
Frequency Range ..................................531 - 1602 kHz [ /N ]
..................................520 - 1710 kHz [ /U ]
Signal to Noise Ratio.................................................... 50 dB
Usable Sensitivity .......................................... Loop 400mV/m
Distortion ........................................ 400Hz, 30 % Mod. 0.5 %
Selectivity ...................................................... ± 18 kHz 70 dB
AUDIO SECTION
Power Output (20 Hz - 20 kHz/THD=0.08%)
Front L&R .................................................. 8 ohms 60 W / Ch
Center........................................................ 8 ohms 60 W / Ch
Surround L&R............................................ 8 ohms 60 W / Ch
Surround Back L&R................................... 8 ohms 60 W / Ch
Front L&R .................................................. 6 ohms 75 W / Ch
Center........................................................ 6 ohms 75 W / Ch
Surround L&R............................................ 6 ohms 75 W / Ch
Surround Back L&R................................... 6 ohms 75 W / Ch
Input Sensitivity/Impedance......................168 mV/ 47 kohms
Signal to Noise Ratio
(Analog Input / Pure Direct) ................................. 105 dB
Frequency Response
(Analog Input / Pure Direct) ........ 8 Hz - 100 kHz (± 3 dB)
(Digital Input / 96 kHz PCM) ......... 8 Hz - 45 kHz (± 3 dB)
VIDEO SECTION
Television Format ..................................................NTSC/PAL
Input Level/Impedance ..................................1 Vp-p/75 ohms
Output Level/Impedance................................1 Vp-p/75 ohms
Video Frequency Response .............. 5 Hz to 8 MHz (- 1 dB)
Video Frequency (Component) ....... 5 Hz to 80 MHz (- 1 dB)
S/N................................................................................ 60 dB
GENERAL
Power Requirement ......................... AC 100 V 50/60 Hz [ /F ]
.........................AC 230 V 50/60 Hz [ /N ]
..............................AC 120 V 60 Hz [ /U ]
Power Consumption ............................................ 360 W [ /F ]
............................................ 370 W [ /N ]
..............................................3.5 A [ /N ]
Weight ....................................................... 11.1 kg (24.5 lbs)
ACCESSORIES
Remote Control Unit RC5500SR..........................................1
AAA-size batteries............................................................... 2
FM Antenna..........................................................................1
AM Loop Antenna.................................................................1
1. TECHNICAL SPECIFICATIONS
オーディオパワーアンプ部
定格出力（20Hz-20kHz／THD＝0.08％）
 フロント L/R...................... 60W/CH8 Ω
 センター.............................. 60W/CH8Ω
 サラウンド L/R................ 60W/CH8 Ω
 サラウンドバック L/R...... 60W/CH8 Ω
 フロント L/R.................... 75W/CH6 Ω
 センター.............................. 75W/CH6Ω
 サラウンド L/R................ 75W/CH6 Ω
 サラウンドバック L/R...... 75W/CH6 Ω
実用最大出力（1kHz／JEITA）
 フロント L/R...................... 85W/CH6 Ω
 センター ............................. 85W/CH6 Ω
 サラウンド L/R................ 85W/CH6 Ω
 サラウンドバック L/R...... 85W/CH6 Ω
出力帯域幅（50W/0.09％）
（ダイレクト入力）.....................6Hz-50kHz
周波数特性（ダイレクト入力）
  .................. 5Hz-100kHz（+/-3dB）
S/N 比（ダイレクト入力）.................... 105dB
ダンピングファクター.................................100
入力感度/ インピーダンス.... 168mV/47kΩ
デコーダー＆プリアンプ部
再生対応信号フォーマット
  ......................................PCM オーディオ
（fs=32kHz、44.1kHz、48kHz、96kHz）、
DOLBYDIGITAL、DOLBYDIGITALEX.、
DTS、DTS-ES、DTS96/24、AAC
周波数特性
（アナログ入力：ピュアダイレクトモード）
  .................5Hz-100kH ｚ（+/-3dB）
（デジタル入力：PCM96kHz）
  .................5Hz-45kHｚ（+/-3dB）
S/N比
（ピュアダイレクトモード：20kLPF ＆A-weight）
  ..................................................... 104dB
入力
・
出力イ
ン
ピ
ー
ダ
ンス...................... 75Ω
入出力レベル（100%）............................ 1Vp-p
S/N比........................................................60dB
周波数特性（Video、S-Video）
  ...........................5Hz-10MHz（-3dB）
周波数特性（コンポーネント Video）
  ......................... 5Hz-45MHz（-3dB）
総合
電源電圧.........................AC100V50/60Hz
消費電力....................................................360W
スタンバイ消費電力.............................約 0.8W
質量 .....................................................11.1kg

2
Surround Mode Input Signal Decoding
Output Channel Front information display
L/R C
SL
SR
SBL
SBR
SubW Signal format indicators Channel status
AUTO Dolby Surr. EX Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital 5.1 OOO -O2DIGITAL L, C, R, SL, SR, LFE
Dolby D(2ch) Dolby Digital 2.0 O----
2DIGITAL L, R
Dolby D (2ch Surr) Pro Logic IIx movie OOOO -2DIGITAL , 2SURROUND L, R, S
DTS-ES DTS-ES OOOOOdts, ES L, C, R, SL, SR, S, LFE
DTS 96/24 DTS 96/24 OOO -Odts 96/24 L, C, R, SL, SR, LFE
DTS (5.1ch) DTS 5.1 OOO -Odts L, C, R, SL, SR, LFE
PCM(Audio) PCM (Stereo) O----PCM L,R
PCM 96kHz PCM (96kHz Stereo) O----PCM L,R
HDCD PCM (Stereo) O- - - - PCM HDCD L, R
Analog Stereo O- - - - ANALOG -
PURE-DIRECT Dolby D Surr. EX Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital 5.1 OOO -O2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Dolby Digital 2.0 O----
2DIGITAL L, R
Dolby D (2ch Surr) Pro Logic IIx movie OOOO -2DIGITAL , 2SURROUND L, R, S
DTS-ES DTS-ES OOOOOdts, ES L, C, R, SL, SR, S, LFE
DTS 96/24 DTS 96/24 OOO -Odts 96/24 L, C, R, SL, SR, LFE
DTS (5.1ch) DTS 5.1 OOO -Odts L, C, R, SL, SR, LFE
PCM (Audio) PCM (Stereo) O----PCM L,R
PCM 96kHz PCM (96kHz Stereo) O----PCM L,R
HDCD PCM (Stereo) O- - - - PCM HDCD L, R
Analog Stereo O- - - - ANALOG -
EX/ES Dolby D Surr. EX Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, LFE
DTS-ES DTS-ES OOOOOdts , ES L, C, R, SL, SR, S, LFE
DTS(5.1ch) DTS-ES OOOOOdts L, C, R, SL, SR, LFE
DOLBY
(PL IIx movie)
(PL IIx music)
(PL IIx game)
(Pro Logic)
Dolby D Surr. EX Dolby Digital 5.1 OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital 5.1 OOOOO
2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Pro Logic IIxOOOO -2DIGITAL L, R
Dolby D (2ch Surr) Pro Logic IIxOOOO -2DIGITAL , 2SURROUND L, R, S
PCM (Audio) Pro Logic IIxOOOO - PCM L, R
Analog Pro Logic IIxOOOO - ANALOG -
DTS
(Neo:6 Cinema)
(Neo:6 Music)
DTS-ES DTS 5.1 OOO -Odts, ES L, C, R, SL, SR, S, LFE
DTS 96/24 DTS 96/24 OOO -Odts 96/24 L, C, R, SL, SR, LFE
DTS (5.1ch) DTS 5.1 OOO -Odts L, C, R, SL, SR, LFE
PCM (Audio) Neo:6 OOOO - PCM L, R
Analog Neo:6 OOOO - ANALOG -
Dolby D (2ch) Neo:6 OOOO -2DIGITAL L, R
Dolby D (2ch Surr) Neo:6 OOOO -2DIGITAL , 2SURROUND L, R, S
CS II Cinema
CS II Music
CS II Mono
PCM (Audio) CS II OOOOOPCM L, R
Analog CS II OOOOOANALOG -
Dolby D (2ch) CS II OOOOO
2DIGITAL L, R
Dolby D (2ch Surr) CS II OOOOO
2DIGITAL , 2SURROUND L, R, S
STEREO Dolby Surr. EX Stereo O---O2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Stereo O---O2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Stereo O----
2DIGITAL L, R
Dolby D (2ch Surr) Stereo O----
2DIGITAL , 2SURROUND L, R, S
DTS-ES Stereo O---Odts, ES L, C, R, SL, SR, S, LFE
DTS 96/24 Stereo O---Odts 96/24 L, C, R, SL, SR, LFE
DTS (5.1ch) Stereo O---Odts L, C, R, SL, SR, LFE
PCM (Audio) Stereo O----PCM L,R
PCM 96kHz Stereo O----PCM L,R
HDCD PCM (Stereo) O- - - - PCM HDCD L, R
Analog Stereo O- - - - ANALOG -
Virtual Dolby Surr. EX Virtual O----
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Virtual O----
2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Virtual O----
2DIGITAL L, R
Dolby D (2ch Surr) Virtual O----
2DIGITAL , 2SURROUND L, R, S
DTS-ES Virtual O- - - - dts, ES L, C, R, SL, SR, S, LFE
DTS (5.1ch) Virtual O- - - - dts L, C, R, SL, SR, LFE
PCM (Audio) Virtual O----PCM L,R
Analog Virtual O- - - - ANALOG -
Multi Ch.
Stereo
Dolby Surr. EX Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital 5.1 OOO -O2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Multi Channel Stereo OOOO -2DIGITAL L, R
Dolby D (2ch Surr) Multi Channel Stereo OOOO -2DIGITAL , 2SURROUND L, R, S
DTS-ES DTS-ES OOOOOdts, ES L, C, R, SL, SR, S, LFE
DTS (5.1ch) DTS 5.1 OOO -Odts L, C, R, SL, SR, LFE
PCM (Audio) Multi Channel Stereo OOOO - PCM L, R
Analog Multi Channel Stereo OOOO - ANALOG -
Notes:
• Dolby Digital (2 ch: Lt/Rt): signal with Dolby
Surround flag Speakers are full set.
• No sound outputs from the surround speaker, center
speaker and subwoofer if the DVD disc has no
surround data.
Abbreviations
L/R : Front speakers
C : Center speaker
SL/SR : Surround speakers
SBL/SBR : Surround Back speakers
SubW : Sub woofer speaker
The relation between the selected surround mode and the input signal
The surround mode is selected with the surround mode buttons on SR3001 or the remote control unit. However, the sound
you hear is subject to the relationship between the selected surround mode and input signal. That relationship is as follows;

3
サラウンドモード  入力信号 再 生 出力チャンネル 前面表示
L/R C
SL
SR
SBL
SBR
SubW 信号フォーマット表示 プログラムチャンネル表示
AUTO Dolby Surr. EX Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital 5.1 OOO -O2DIGITAL L, C, R, SL, SR, LFE
Dolby D(2ch) Dolby Digital 2.0 O----
2DIGITAL L, R
Dolby D (2ch Surr) Pro Logic IIx movie OOOO*2DIGITAL , 2SURROUND L, R, S
DTS-ES DTS-ES OOOOOdts, ES L, C, R, SL, SR, S, LFE
DTS 96/24 DTS 96/24 OOO -Odts 96/24 L, C, R, SL, SR, LFE
DTS (5.1ch) DTS 5.1 OOO -Odts L, C, R, SL, SR, LFE
PCM(Audio) PCM (Stereo) O----PCM L,R
PCM 96kHz PCM (96kHz Stereo) O----PCM L,R
AAC (5.1ch) AAC 5.1 OOO -OAAC L, C, R, SL, SR, LFE
AAC (2ch) AAC 2.0 O----AAC L,R
Analog Stereo O----ANALOG -
PURE-DIRECT Dolby D Surr. EX Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital 5.1 OOO -O2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Dolby Digital 2.0 O----
2DIGITAL L, R
Dolby D (2ch Surr) Pro Logic IIx movie OOOO*2DIGITAL , 2SURROUND L, R, S
DTS-ES DTS-ES OOOOOdts, ES L, C, R, SL, SR, S, LFE
DTS 96/24 DTS 96/24 OOO -Odts 96/24 L, C, R, SL, SR, LFE
DTS (5.1ch) DTS 5.1 OOO -Odts L, C, R, SL, SR, LFE
PCM (Audio) PCM (Stereo) O----PCM L,R
PCM 96kHz PCM (96kHz Stereo) O----PCM L,R
AAC (5.1ch) AAC 5.1 OOO -OAAC L, C, R, SL, SR, LFE
AAC (2ch) AAC 2.0 O----AAC L,R
Analog Stereo O----ANALOG -
EX/ES Dolby D Surr. EX Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, LFE
DTS-ES DTS-ES OOOOOdts, ES L, C, R, SL, SR, S, LFE
DTS(5.1ch) DTS-ES OOOOOdts L, C, R, SL, SR, LFE
AAC (5.1ch) AAC EX OOO -OAAC L, C, R, SL, SR, LFE
DOLBY
(PL IIx movie)
(PL IIx music)
(PL IIxgame)
(Pro Logic)
Dolby D Surr. EX Dolby Digital 5.1 OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital 5.1 OOOOO
2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Pro Logic IIxOOOO*2DIGITAL L, R
Dolby D (2ch Surr) Pro Logic IIxOOOO*2DIGITAL, 2SURROUND L, R, S
PCM (Audio) Pro Logic IIxOOOO*PCM L, R
AAC (2ch) Pro Logic IIxOOOO*AAC L, R
Analog Pro Logic IIxOOOO*ANALOG -
DTS
(Neo:6 Cinema)
(Neo:6 Music)
DTS-ES DTS 5.1 OOO -Odts, ES L, C, R, SL, SR, S, LFE
DTS 96/24 DTS 96/24 OOO -Odts 96/24 L, C, R, SL, SR, LFE
DTS (5.1ch) DTS 5.1 OOO -Odts L, C, R, SL, SR, LFE
PCM (Audio) Neo:6 OOOO*PCM L, R
Analog Neo:6 OOOO*ANALOG -
Dolby D (2ch) Neo:6 OOOO*2DIGITAL L, R
Dolby D (2ch Surr) Neo:6 OOOO*2DIGITAL, 2 SURROUND L, R, S
AAC (2ch) Neo:6 OOOO*AAC L, R
CS II Cinema
CS II Music
CS II Mono
PCM (Audio) CS II OOOOOPCM L, R
Analog CS II OOOOOANALOG -
Dolby D (2ch) CS II OOOOO
2DIGITAL L, R
Dolby D (2ch Surr) CS II OOOOO
2DIGITAL, 2 SURROUND L, R, S
AAC (2ch) CS II OOOOOAAC L, R
STEREO Dolby Surr. EX Stereo O---O2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Stereo O---O2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Stereo O---
*2DIGITAL L, R
Dolby D (2ch Surr) Stereo O---
*2DIGITAL, 2SURROUND L, R, S
DTS-ES Stereo O---Odts, ES L, C, R, SL, SR, S, LFE
DTS 96/24 Stereo O---Odts 96/24 L, C, R, SL, SR, LFE
DTS (5.1ch) Stereo O---Odts L, C, R, SL, SR, LFE
PCM (Audio) Stereo O---
*PCM L, R
PCM 96kHz Stereo O---
*PCM L, R
AAC (5.1ch) Stereo O---OAAC L, C, R, SL, SR, LFE
AAC (2ch) Stereo O---
*AAC L, R
Analog Stereo O---
*ANALOG -
Virtual Dolby Surr. EX Virtual O----
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Virtual O----
2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Virtual O----
2DIGITAL L, R
Dolby D (2ch Surr) Virtual O----
2DIGITAL, 2SURROUND L, R, S
DTS-ES Virtual O----dts,ES L,C,R,SL,SR,S,LFE
DTS (5.1ch) Virtual O----dts L,C,R,SL,SR,LFE
PCM (Audio) Virtual O----PCM L,R
AAC (5.1ch) Virtual O----AAC L,C,R,SL,SR,LFE
AAC (2ch) Virtual O----AAC L,R
Analog Virtual O----ANALOG -
Multi Ch.
Stereo
Dolby Surr. EX Dolby Digital EX OOOOO
2DIGITAL L, C, R, SL, SR, S, LFE
Dolby D (5.1ch) Dolby Digital 5.1 OOO -O2DIGITAL L, C, R, SL, SR, LFE
Dolby D (2ch) Multi Channel Stereo OOOO*2DIGITAL L, R
Dolby D (2ch Surr) Multi Channel Stereo OOOO*2DIGITAL, 2SURROUND L, R, S
DTS-ES DTS-ES OOOOOdts, ES L, C, R, SL, SR, S, LFE
DTS (5.1ch) DTS 5.1 OOO -Odts L, C, R, SL, SR, LFE
PCM (Audio) Multi Channel Stereo OOOO*PCM L, R
AAC (5.1ch) AAC 5.1
OOO - O AAC L, C, R, SL, SR, LFE
AAC (2ch) Multi Channel
OOOO
*AAC L, R
Analog Multi Channel Stereo
OOOO
*ANALOG -
• DolbyDigital(2chSurr):
  ドルビーサラウンド処理されたドルビーデ
ジタル 2ch 信号
• *: サブウーファー他のスピーカーの Large/
Smallによってサブウーファー出力は異なり
ます。
 L/R:フロントスピーカー
 C:センタースピーカー
 SL/SR:サラウンドスピーカー
SBL/SBR:サラウンドバックスピーカー
 SubW:サブウーファースピーカー
PS3001

4
SURROUND
AV SURROUND RECEIVER SR3001
DOWN UP
VOLUME INPUTSELECTOR
POWERON/OFF PHONES
STANDBY
MUTE 7.1CHINPUT S.SPEAKER B ATT
PURE
SETUP DIRECT
SIMPLE
AUTO HT-EQ MENU
ENTER
DISPLAY MEMORY CLEAR
T-MODE EXIT BAND
MODE
DISP MULTI AUTO TUNED ST V – OFF NIGHT PEAK ANALOG
DIGITAL
ATT
SLEEP SURR AUTO DIRECT DISC6.1 MTX 6.1 EQ
DIGITAL
SURROUND
PCM
L
C
R
SL S SR
LFE
11/16 ins.
(16.3 mm)
5-3/4 ins.
(146 mm)
17-5/16 ins. (440 mm)
13/16 ins.
(20 mm)
1 in.
(25 mm)
13-1/2 ins.
(342.5 mm)
15-3/8 ins.
(387.5 mm)
6-7/16 ins.
(162.3 mm)
DIMENSIONS

5
DTS was introduced in 1994 to provide 5.1 channels of
discrete digital audio into home theater systems.
DTS brings you premium quality discrete multichannel
digital sound to both movies and music.
DTS is a multichannel sound system designed to
create full range digital sound reproduction.
The no compromise DTS digital process sets the
standard of quality for cinema sound by delivering
an exact copy of the studio master recordings to
neighborhood and home theaters.
Now, every moviegoer can hear the sound exactly as
the moviemaker intended.
DTS can be enjoyed in the home for either movies or
music on of DVD’s, LD’s, and CD’s.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
The advantages of discrete multichannel systems
over matrix are well known.
But even in homes equipped for discrete multichannel,
there remains a need for high-quality matrix decoding.
This is because of the large library of matrix surround
motion pictures available on disc and on VHS tape; and
analog television broadcasts.
The typical matrix decoder of today derives a center
channel and a mono surround channel from two-
channel matrix stereo material. It is better than a
simple matrix in that it includes steering logic to
improve separation, but because of its mono, band-
limited surround it can be disappointing to users
accustomed to discrete multichannel.
Neo:6 offers several important improvements as
follow,
• Neo:6 provides up to six full-band channels of
matrix decoding from stereo matrix material. Users
with 6.1 and 5.1 systems will derive six and five
separate channels, respectively, corresponding to
the standard home-theater speaker layouts.
• Neo:6 technology allows various sound elements
within a channel or channels to be steered
separately, and in a way which follows naturally
from the original presentation.
• Neo:6 offers a music mode to expand stereo nonmatrix
recordings into the five- or six-channel layout, in a way
which does not diminish the subtlety and integrity of the
original stereo recording.
DTS-ES Extended Surround is a new multichannel
digital signal format developed by Digital Theater
Systems Inc. While offering high compatibility with
the conventional DTS Digital Surround format, DTS-
ES Extended Surround greatly improves the 360-
degree surround impression and space expression
thanks to further expanded surround signals. This
format has been used professionally in movie
theaters since 1999.
In addition to the 5.1 surround channels (FL, FR, C,
SL, SR and LFE), DTS-ES Extended Surround also
offers the SB (Surround Back) channel for surround
playback with a total of 6.1 channels. DTS-ES
Extended Surround includes two signal formats with
different surround signal recording methods, as DTS-
ES Discrete 6.1 and DTS-ES Matrix 6.1.
“DTS”, “DTS-ES” and “Neo:6” are trademarks of
Digital Theater Systems, Inc.
The stereo CD is a 16-bit medium with sampling at
44.1 kHz. Professional audio has been 20- or 24-
bit for some time, and there is increasing interest
in higher sampling rates both for recording and for
delivery into the home. Greater bit depths provide
extended dynamic range. Higher sampling rates
allow wider frequency response and the use of anti-
alias and reconstruction filters with more favorable
aural characteristics.
DTS 96/24 allows for 5.1channel sound tracks to be
encoded at a rate of 96kHz/24bits on DVD-Video
titles.
When DVD-video appeared, it became possible to
deliver 24-bit, 96 kHz audio into the home, but only in
two channels, and with serious limitations on picture.
This capability has had little use.
DVD-audio allows 96/24 in six channels, but a new
player is needed, and only analog outputs are provided,
necessitating the use of the D/A converters and analog
electronics provided in the player.
DTS 96/24 offers the following:
1. Sound quality transparent to the original 96/24
master.
2. Full backward compatibility with all existing
decoders. (Existing decoders will output a 48 kHz
signal)
3. No new player required: DTS 96/24 can be carried
on DVD-video, or in the video zone of DVD-audio,
accessible to all DVD players.
4. 96/24 5.1-channel sound with full-quality full-
motion video, for music programs and motion
picture soundtracks on DVD-video.
“DTS” and “DTS 96/24” are trademarks of Digital
Theater Systems, Inc.
2. TECHNICAL DESCRIPTION

6
Dolby Digital identifies the use of Dolby Digital audio
coding for such consumer formats as DVD and
DTV. As with film sound, Dolby Digital can provide
up to five full-range channels for left, center, and
right screen channels, independent left and right
surround channels, and a sixth ( ".1") channel for
low-frequency effects.
Dolby Surround Pro Logic II is an improved matrix
decoding technology that provides better spatiality and
directionality on Dolby Surround program material;
provides a convincing three-dimensional soundfield on
conventional stereo music recordings; and is ideally
suited to bring the surround experience to automotive
sound. While conventional surround programming
is fully compatible with Dolby Surround Pro Logic II
decoders, soundtracks will be able to be encoded
specifically to take full advantage of Pro Logic II
playback, including separate left and right surround
channels. (Such material is also compatible with
conventional Pro Logic decoders.)
Dolby Digital EX creates six full-bandwidth output
channels from 5.1-channel sources. This is done
using a matrix decoder that derives three surround
channels from the two in the original recording. For
best results, Dolby Digital EX should be used with
movies soundtracks recorded with Dolby Digital
Surround EX.
About Dolby Pro Logic II x
Dolby Pro Logic IIx technology delivers a natural
and immersing 7.1-channel listening experience
to the home theater environment. A product of
Dolby's expertise in surround sound and matrix
decoding technologies, Dolby Pro Logic IIx is a
complete surround sound solution that maximizes
the entertainment experience from stereo as well as
5.1-channel encoded sources.
Circle Surround II (CS-II) is a powerful and versatile
multichannel technology. CS-II is designed to enable
up to 6.1 multichannel surround sound playback
from mono, stereo, CS encoded sources and other
matrix encoded sources. In all cases the decoder
extends it into 6 channels of surround audio and a
LFE/subwoofer signal. The CS-II decoder creates a
listening environment that places the listener “inside”
music performances and dramatically improves both
hi-fi audio conventional surround-encoded video
material. CS-II provides composite stereo rear
channels to greatly improve separation and image
positioning – adding a heightened sense of realism to
both audio and A/V productions.
CS-II is packed with other useful feature like dialog
clarity (SRS Dialog) for movies and cinema-like bass
enrichment (TruBass). CS-II can enable the dialog to
become clearer and more discernable in movies and it
enables the bass frequencies contained in the original
programming to more closely achieve low frequencies
– overcoming the low frequency limitations of the
speakers by full octave.
Circle Surround II , Dialog Clarity, TruBass, SRS and
symbol are trademarks of SRS Labs, Inc.
Circle Surround II , Dialog Clarity and TruBass
technology are incorporated under license from SRS
Labs, Inc.
HDCD®(High Definition Compatible Digital ®) is a
patented process for delivering on Compact Disc the
full richness and details of the original microphone
feed.
HDCD encoded CDs sound better because they are
encoded with 20-bits of real musical information as
compared to 16-bits for all other CDs.
HDCD overcomes the limitation of the 16-bit CD
format by using a sophisticated system to encode
the additional four bits onto the CD while remaining
completely compatible with the CD format.
When listening to HDCD recordings, you hear more
dynamic range, a focused 3-D sound stage, and
extremely natural vocal and musical timbre. With
HDCD, you get the body, depth and emotion of the
original performance not a flat, digital imitation.
HDCD system manufactured under license from
Microsoft. This product is covered by one or more
of the following: In the United States 5,479,168
5,638,074 5,640,161 5,808,574 5,838,274 5,854,600
5,864,311 5,872,531 and in Australia 669,114 with
other patents pending.
Dolby Pro Logic IIx is fully compatible with Dolby Surround
Pro Logic technology and can optimally decode the
thousands of commercially available Dolby Surround
encoded video cassettes and television programs with
enhanced depth and spatiality. It can also process any
high-quality stereo or Advanced Resolution 5.1-channel
music content into a seamless 6.1- or 7.1-channel
listening experience.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.

7
A
エーエーシー
AC (A
アドバンスド
dvancedA
オーディオ
udioC
コーディング
oding)
BSデジタル放送や地上デジタル放送が採用している音声方式で、MPEG2 規格のひとつです。高
圧縮率と高音質が特長で、2CH ステレオ音声に加え、
5.1CHサラウンド音声や多言語放送を可能
にしています。以下はパテントナンバーです。
5,848,391 5,291,557 5,451,954 5400433 5,222,189
5,357,594 5752225 5,394,473 5,583,962 5,274,740
5,633,981 5297236 4,914,701 5,235,671 07/640,550
5,579,430 08/678,666 98/03037 97/02875 97/02874
98/03036 5,227,788 5,285,498 5,481,614 5,592,584
5,781,888 08/039,478 08/211,547 5,703,999 08/557,046
08/894,844 5,299,238 5,299,239 5,299,240 5,197,087
5,490,170 5,264,846 5,268,685 5,375,189 5,581,654
5,548,574 5,717,821 08/937,950 05-183,988 08/506,729
08/576,495 08/392,756
ドルビーラボラトリーズからの実施権に基
づき製造されています。
Dolby、ドルビー、ProLogic及びダブルD
記号及び "AAC" ロゴは、ドルビーラボラト
リーズの商標です。
Circle Surround II、Tru Surround、Tru
SurroundHeadphone、SRSと 記号は
SRSLabs,Inc.の商標です。
Circle Surround II、Tru Surround、Tru
SurroundHeadphone技術は、SRSLabs,
Inc. からのライセンスに基づき製品化され
ています。
DTSおよびDTSDigitalSurroundは、
Digital Theater System, Inc.の登録商標
です。
HEADPHONE
®, HDCD®,HighDefinition
Compatible Digital®および M ic ro sof t ®は、
米国内や他の国におけるマイクロソフト社の
登録商標または商標です。HDCDシステムは
マイクロソフト社 からの ライセンスに 基づき製
造されています。この製品は下記の1つ以上
の特許によって保護されています。
米国内：5,479,168、5,638,074、5,640,161、
5,808,574、5,838,274、5,854,600、
5,864,311、5,872,531。
オーストラリア国内：6 69114。
その他の特許は出願中。

8
Channel Measuremet
Point Point
Surround Left CN61 VR81
Center CN61 VR81
Surround Right CN61 VR81
Front Left CN61 VR81
Surroud Back Left CN61 VR81
Front Right CN61 VR81
After Turning ON
Time Table of Idling Current RiseDC voltmeter........Connect to CN61
Measurement Voltage
12.0 mV ±
0.5 mV
13.0 mV ±
0.5 mV
13.0 mV ± 0.5 mV
13.2 mV ±
0.5 mV
13.4 mV ±
0.5 mV
13.5 mV ± 0.5 mV
(CN61)
Alignment
10 min
20 min
30 min
40 min
50 min
5 min
Surroud Back Right
No.
1
2
3
4
5
6
7 CN61 VR81 13.5 mV ± 0.5 mV60 min
MAIN PWB
CUP11928Z
BIAS T.R.
PWB
3. POWER AMPLIFIER ADJUSTMENT
Idling Current Alignment
1. Each of the measurement points are provided with the
two test points. Set a digital Voltage meter to DC voltage
input, connect the meter to the test points at both
contact points.
2. After the setup above, turn on the main switch.
3. Adjust variable resistors (VR81) according to the digital
voltmeter readings. The target setting value is the
following table for each channels.
Settings :
Master Volume — Minimum
Speaker out — No Load
Top lid — OPEN
アイドリング電流調整
1. 電源を ON する前にそれぞれの "+" 端子と "-" 端子間にデ
ジタルボルトメーターを接続します。デジタルボルトメー
ターを DC 電圧入力にセットします。
2. 上記のセットアップの後に、本機の電源を ON します。
3. デジタルボルトメーターの電圧値を監視しながら可変抵抗
器(VR81) を調節します。
各チャンネルの目標値は下記の表を参照下さい。
セッティング :
マスター・ボリューム 最小
スピーカー接続 無し
トップカバー –– 無し

9
SERV I CE MODE
SR3 0 0 1
V060704 1U
Month Date Dest.
(Dest. : Destination)
Year
SOFT TYPE XX
(XX is displayed in Hex)
CODE T YPEXXXX
(XXXX is displayed in Hex)
CD01 02060105
SIGDev. TYP Ver.No.
No. : DISP CODE ID Dev. : Device ID SIG. : CODE SIG ID
TYP. : CODE TYPE ID Ver. : Version
SOFT TYPE XX
(XX is displayed in Hex)
CODE T YPEXXXX
(XXXX is displayed in Hex)
CD01 02060105
SIGDev. TYP Ver.No.
No. : DISP CODE ID Dev. : Device ID SIG. : CODE SIG ID
TYP. : CODE TYPE ID Ver. : Version
SERV I CE MODE
PS3 0 0 1
V060704 1F
Month Date Dest.
(Dest. : Destination)
Year
4. SERVICE MODE
Microprocessor (IC41), DSP ROM(IC20 )Version and FLD
Segment Check Mode.
1. While the power is on, ATT, EXIT and 7.1CH INPUT
buttons simultaneously more than 3 seconds.
The FL display shows "SERVICE MODE" for 2 seconds
then shows the model name.
2. Press ENTER button, The software version of the
microprocessor (IC41) is displayed in the format below.
3. Press ENTER button again, The software Type Number
is displayed.
4. Press ENTER button again, The Code Group Type
Number is displayed.
5. Press ENTER button again, The left half, right half and
center of the label area in the FLD light on and off each
other.
6. Press ENTER button again, The segments of the
character area in the FLD flick in checker pattern.
7. Press ENTER button again, All the FL segments turns
off.
8. Press ENTER button again. Every time ENTER button
is pressed, DSP code is indicated in turn from NO.1 to
NO.10.
9. Press ENTER button again to quit this mode.
Microprocessor (IC41), DSP ROM (IC20) のVersion 表示及び
FL 点燈を確認するモードです。
1. セットの電源を入れます。ATT, EXIT, 7.1CHINPUT のボ
タンを同時に約 3秒以上押します。
"SERVICEMODE" と表示が出ます。更に約 2秒後に機種
名が表示されます。
2. ENTER ボタンを押します。マイコン (IC41) のバージョン
が次のように表示されます。
3. ENTER ボタンを押します。マイコン (IC28) のSoft ware
Type が表示されます
4. ENTERボタンを押します。CodeGroupType が表示さ
れます
5. ENTER ボタンを押します。FL 表示の右、左、中央部分が
交互に点燈を繰り返します。
6. ENTER ボタンを押します。FL のCharacter 部分が点滅
します。
7. ENTER ボタンを押します。FL が全消灯します
8. ENTER ボタンを押します。ENTER ボタンを押す度に
DSPCodeID がNO.1から NO.10 まで順に表示されます
9. ENTER ボタンを押します。サービスモードは解除されま
す。

10
但しリセット行うと、セットアップメニューにて設
定した内容、サラウンドモードの設定の情報が消去
されますことをご了承ください。
SURROUND
DOWN UP
VOLUME INPUTSELECTOR
POWERON/OFF PHONES
STANDBY
MUTE 7.1CHINPUT S.SPEAKER B ATT
PURE
SETUP DIRECT
SIMPLE
AUTO HT-EQ MENU
ENTER
DISPLAY
EXIT
MODE
AV SURROUND AMPLIFIER PS3001
NIGHT SLEEP
V-OFF A / D
DISP V – OFF NIGHT PEAK ANALOG
DIGITAL
ATT
SLEEP SURR
AUTO DIRECT DISC6.1 MT X 6.1 SPKR AB EQ
DIGITAL
SURROUND
AAC
PCM
L
C
R
SL S SR
LFE
1. 電源が入っていることを確認します。
2. 本体の 7.1CH INPUT ボタンを押しながら、
ATT
ボタンを 3 秒以上押します。
 本機は一 度スタンバイ状 態になった後、再 度
POWER − ON 状態となり、各種設定された内容
が初期化され、工場出荷時の状態に戻ります。
Note :
Step3, 4 is to check if CPU software is capable of DSP code.
"Software Type No" is to show what "DSP Code Group" CPU
is capable of. And vice versa.
Step 8 is to manage the 16 codes for DSP.
• When the unit is once turned into Service Mode, the
unit keeps this mode until the main power is turned off.
(Turning into stand-by mode does not make it quit from
Service Mode.) When the unit quits from Service Mode,
Information in the memory is also cleared and the unit
returns to the status when it is out from the factory.
Product Reset
To reset the back up memory of the unit into the default
status, follow the procedure below.
1. Turn of the unit and press ATT and 7.1CH INPUT button
simultaneously more than 3 seconds.
2. After "DEFAULT" is displayed on FLD, power is turned
off once and turned of again, EEPROM is cleared to
the default status, microprocessor is reset and the unit
returns to the normal status.
Note :
When the unit is shipped from the factory, the procedure
above must be done to set the unit to initial status after
the tests.
Product Reset

11
CHECK DSP
CHECK DSP ROM
CHECK E2P I F
CHECK DSP
CHECK DSP ROM
CHECK E2P I F
5. SYSTEM ERROR
When the microprocessor detects a trouble, the following
information is displayed on the FLD.
• After the error contents indication, Surround Mode is
initialized and returned Factory mode.
• The contents of the ERROR indication are the
followings.
1. Trouble in DSP.
If communication with DSP is troubled more than 2
seconds
Indication is keep and sound is mute.
2. Trouble in DSP Code.
The trouble of DSP Code was found.
3. Trouble in EEP-ROM IF
If communication with EEPROM is troubled more than 2
seconds.
製品内部での異常発生時に処理、表示を行います。
• ERROR 内容を表示後、SurroundMode は初期化され工
場出荷の状態に戻ります。
• ERROR 表示の内容は下記です。
1. DSP 異常検出表示。
DSP との通信上の不具合を約 2秒検出した時。
 表示状態はそのままで音声は Mute 状態
2. DSP Code 異常検出表示。
DSPCode の異常を検出した時。
3. EEP-ROM IF 異常検出表示。
EEP-ROM との通信不具合が約 2秒以上生じた時。

12
6. UPDATE FIRMWARE
Software for CPU and DSP can be updated.
Have update application software. ("UpgradeDSP.exe" and
"H8Download.exe")
There are two mode of download, regarding to the target of
software as bellow.
Mode 1: Update DSP’s software to Flash-ROM.
This mode is to update the software for DSP.
The target devise is Flash-ROM (IC20) on CUP11820Z
(INPUT PWB).
The Unit needs to be set update condition, by three front
keys.
Mode 2: Update CPU’s software to internal Flash-ROM.
This mode is to update the software for DSP.
The target devise is internal flash ROM of CPU (IC41) on
CUP11820Z (INPUT PWB).
The Unit needs to be set to writing condition, by pushing
internal switch from back-panel.
The following items are required for updating.
RS232C Dsub-9 pin cable (female to female/Straight type)
Windows PC (98, NT, ME, 2000, XP) with RS-232C port.
Update software to CPU.
Update software to DSP.
Use RS232C Dsub-9 pin cable (female to female/Straight
type) to connect PC and the unit.
COM port on PC needs to be set by dialog box for each
program. COM port can be set from COM1 to COM5.
Download Firmware for DSP (Mode 1)
1. Put the "DSP upgrade" folder into anywhere on your PC’
s hard disc.
2. Connect PC and DATA UPDATE KIT with RS232C cable,
connect DATA UPDATE KIT and connector (CN26) with
FFC.
6. UPDATE FIRMWARE
CPU および DSP ソフトウェアのアップデートを行います .
ソフトウェアのアップデートには UpgradeDSP.exe と
H8Download.exe が必要です。
アップデートには次の二つのモードがあります。
Mode 1:DSP 用Flash-ROM のアップデート
このモードは DSP のソフトウェアをアップデートするモー
ドです。
CUP11820Z(INPUT PWB)の基板上にある Flash-ROM
(IC20) のソフトウェアをアップデートします。
本機、フロントパネルにある 3つのボタンを押してアップ
デートモードにします。
Mode 2:CPU の内部 Flash-ROM のアップデート
このモードは CPU のソフトウェアをアップデートするモー
ドです。
CUP11820Z(INPUT PWB)の基板上にある CPU(IC41) の
内部 Flash-ROM のソフトウェアをアップデートします。
本機のリアパネルから内部スイッチを押してアップデート
モードにします。
アップデートには下記の機器が必要です。(必要機器 )
RS-232C ストレートケーブル (9Pin メス -9Pin メス )
Windows PC Serial Port 付き (OS: 98, NT, ME,2000, XP)
CPU 用アップデートソフトウェア
DSP 用アップデートソフトウェア
RS-232C ケーブルで本機と接続する PC のCOM ポート番号
を設定してください。
COM ポート番号は COM1 から COM5 まで設定できます。
DSP アップデート方法 (Mode 1)
1. "DSP upgrade" フォルダを PC のハードディスクにコピー
します。
2. RS-232C ケーブルでマイコンアップデートキットと PC を
接続し、FFC とINPUT PWB のコネクタ（CN26）を接続
します。

13
RS232C Dsub-9 pin cable
(female to female/Straight cable)
DATA UPDATE KIT (Part no. : 90M-SR4500JIG)
CN26
INPUT PWB
PC (Windows 98, NT, ME, 2000)
with RS-232C port
DATA UPDATE KIT
cable
CN26
3. Turn on the unit.
4. Press ENTER, MUTE and T-MODE buttons
simultaneously more than 5 seconds to turn the unit into
Loading Mode.
5. "LOADING MODE" will be shown on FLD.
6. Launch "UpgradeDSP.exe" on PC.
Note : yy_mm_dd is release date of software.
7. Click Port setting, and select the COM Port No.
3. 本機の電源を入れます。
4. ENTER, MUTE, T-MODE の3つのボタンを同時に 5秒以
上押し続けて Loading Mode にします。
5. FL ディスプレイに "LOADING MODE" と表示されます。
6. PC から "UpgradeDSP.exe" をダブルクリックして起動し
ます。
注記 : ファイル名の yy_mm_dd はソフトウェアの発行日をあ
らわします。
7. Port setting をクリックし、COM ポート番号を選択します。

14
8. Set the Baud rate to 38400 then click Start
communication button.
9. If the connection is made successfully, a dialog
box saying "Success to connect" appears and
“CONNECTED” is displayed on FLD.
10. Click Send the DSP codes button on the dialog box.
Progress status of updating will be shown on PC and
LOADING is displayed on FLD.
11. If updating is completed successfully, "COMPLETED" is
displayed on FLD. And a dialog box saying "Finished the
DSP code transmitting" appears.
12. Click OK and then Application is closed automatically.
13. Turn off the unit.
8. Baud rate を38400 に設定し、Start communication を
クリックします。
9. 通信接続に成功すると下記のダイアログボックスが表示さ
れ、FL ディスプレイには "CONNECTED" が表示されます。
10.Send the DSP codes をクリックします。アップデー
トのステータスバーが表示され、FL ディスプレイには
"LOADING" が表示されます。
11.アップデートが成功すると FL ディスプレイに
"COMPLETED" と表示されます。同時に "Finished the
DSP code transmitting" のダイアログボックスが表示され
ます。
12.OK をクリックすると自動的にアプリケーションが閉じま
す。
13.本機の電源を切ります。

15
RS232C Dsub-9 pin cable
(female to female/Straight cable)
DATA UPDATE KIT (Part no. : 90M-SR4500JIG)
CN26
INPUT PWB
PC (Windows 98, NT, ME, 2000)
with RS-232C port
DATA UPDATE KIT
cable
CN26
Download Firmware for CPU (Mode 2)
1. Put the "CPU update" folder into anywhere on your PC’s
hard disc.
2. Connect PC and DATA UPDATE KIT with RS232C cable,
connect DATA UPDATE KIT and connector (CN26) with
FFC.
3. Turn on the power of the unit.
Note : When the unit is into boot mode, stand-by LED is
not lights up.
CPU のアップデート方法 (Mode 2)
1. "CPU update" フォルダを PC のハードディスクにコピーし
ます。
2. RS-232C ケーブルでマイコンアップデートキットと PC を
接続し、FFC とINPUT PWB のコネクタ（CN26）を接続
します。
3. 本機の電源を入れます。
注記 :本機はブートモードになり、Stand-by LED は点灯しま
せん。

16
H8FW2505
SR3001_yymmdd.mot
SR3001_yymmdd.mot
H8FW2505
H8FW2505
H8FW2505
4. Launch "H8Download.exe" on PC.
5. Click Set Ports, and select the COM Port No.
6. Click other files... button in the dialog box to specify the
file (SR3001_yymmdd.mot) to be uploading. yymmdd in
file name is release date of software.
4. PC から "H8Download.exe" をダブルクリックして起動し
ます。
5. Set Ports をクリックし、COM ポート番号を選択します。
6. other files…をクリックして、アップデートファイル
(SR3001_yymmdd.mot) を選択し開きます。

17
h82505_38400.inf
7. Click Connect button. If the connection with the H8 µ-P
is successfully made, a dialogue box saying "Success
to the H8 micro processor connection" appears. (If the
connection fails, error message will appear.)
8. Click Send button to start update.
9. If the firmware is updated successfully, a dialog box
saying "Finished the firmware program sending"
appears.
7. Connect をクリックします。H8 u-P と通信接続に成功す
ると "Success to the H8 micro processor connection" の
ダイアログが表示されます。(通信に失敗するとエラーメッ
セージが表示されます。)
8. Send をクリックしアップデートを開始します。
9. ソフトウェアのアップデートが成功すると、"Finished the
firmware program sending" のダイアログボックスが表示
されます。

18
h82505_38400.inf
10. Click Close button to close the application.
11. Disconnect Mains power cord.
12. Disconnect FFC from connector (CN26).
13. Turn on the unit.
Firmware Version Check
To check the versions of the firmware, see "Microprocessor
(CPU), DSP Version and FLD Segment Check Mode" in
"SERVICE MODE" section.
10.Close をクリックしてアプリケーションを閉じます。
11.本機の電源を切ります。
12.本機から FFC を外します。
13.電源を入れます。
バージョンの確認
ソフトウェアのバージョンを確認します。確認方法は
"SERVICE MODE"内の "Microprocessor (CPU), DSP
Version and FLD Segment Check Mode" を参照してください。