March Products LIBRA 120 III (PC620) 120 III (PC620) User manual

LIBRA120III(PC620)
(MB: PC620,SystemChipset: Intel 815E)
12.1” TFT Intel®Socket 370
Celeron/Pentium®IIIMini Kiosk
User’s Manual (Version2503)
LIBRA wmediareaderbezel
LIBRA wprinterbezel
PDFcreated withpdfFactorytrialversion www.pdffactory.com

CopyrightNotice
Thisdocumentiscopyrighted2005bytheManufacturer.
Theinformationprovidedinthisdocumenthasbeen
carefullycheckedandisaccurateatthetimeofpublication.
However,theManufacturer assumesnoresponsibilityfor
anyinfringementsofpatentsorotherrightsofthirdparties
thatmayresultfromitsuse.
No partofthispublicationmay bereproduced,storedina
retrievalsystem,ortransmittedinany form of orviaany
meanswithoutthepriorwrittenpermissionofthe
Manufacturer.Further,thispublicationandfeatures
describedhereinaresubjecttochangewithoutnotice.
Trademarks
Allbrandandproductnamesusedforidentificationinthis
documentare trademarks orregisteredtrademarks oftheir
respectivecompanies.
©Copyright2005,MarchVersion2503
Allrightsreserved.
PrintedinTaiwan
PDFcreated withpdfFactorytrialversion www.pdffactory.com

Unpacking
After unpackingthe LIBRAIII carton,checkandsee ifthe
followingitemsareincludedandingoodcondition.
uLIBRAIIImainsystemx 1
uAccessories
-Power cordx 1
-Utilities&drivers&user manualCD diskettex 1
(fortouchscreendrivers,pleasedownload the
updateddriversfromthefollowingwebsite
http://www.elotouch.com or
http://www.3m.com or
http://www.eturbotouch.com
Makesurethatalloftheitemslistedaboveare present.If
anyoftheaboveitems ismissing,contactyourdealer
immediately.
Warranty
AllproductsmanufacturedbytheManufacturer.are
warrantedagainstdefectivematerialsandworkmanshipfor
oneyearstartingfromthedateofdeliverytotheoriginal
purchaser.However,warrantyorservicewill not be
extendedif1).theproductisrepaired,modifiedoraltered
unlesssuchrepair,modificationoralterationisauthorized
by theManufacturer; or2).theproductserialnumberor
warrantylabelisdefacedormissing;or3).theproductis
notproperlyused.
PDFcreated withpdfFactorytrialversion www.pdffactory.com

ImportantSafetyPrecautions
Before gettingstarted,read theseinstructionsandsave
themforlaterreference.
1. Turnoffthecomputer before cleaning.Cleanwitha
dampordryclothonly.Donotsprayanyliquidcleaner
onscreendirectly.
2. Thepower outletsocketusedtopluginthecomputer
power cordmustbelocatednearthesystemandeasily
accessible.Donotuseoutletsonthesamecircuitof
thesystemsthatregularlyswitchedonandoff.
3. Makesurethevoltageofthepower sourceiscorrect
before connectingthecomputer tothepoweroutlet.
4. If thecomputerissharinganextensioncordwithother
devices,makesure thetotalampere ratingofthe
devicespluggedintotheextensioncorddoesnot
exceedthecord’sampererating.
5. Donotexposethepower cord,extensioncordand
power outlettomoisture.
6. Install thecomputeronareliablesurfacetoprevent
damagecausedbydropping.
7. Thiscomputerisnotequippedwithanoperating
system.Anoperatingsystemmustbeloadedfirst
before installinganysoftware intothecomputer.
8. Disconnectthepowercordfromthecomputer before
any installation.Makesure boththecomputer andthe
externaldevicesareturnedoff.Thesuddensurgeof
power mayruinanysensitivecomponents.Alsomake
surethecomputerisproperlygrounded.
9. Duringinstallationofanyinternalcomponents,besure
togroundyourselftokeepfrom any staticcharge.
Mostelectroniccomponentsaresensitivetothestatic
electriccharge.Useagroundingwriststrap andplace
all electroniccomponentsin any static-shielded
devices.
PDFcreated withpdfFactorytrialversion www.pdffactory.com

10. Theopeningsonthecomputercabinetare forthecabin
ventilationtopreventthecomputer fromoverheating.
DONOTCOVERTHEOPENINGS.
11. Thebrightness oftheflatpaneldisplay will decrease
withuse.However,hoursofusewillvarydependingon
theapplicationenvironment.
12. Ifthecomputer isequippedwithatouchpanel,avoid
usingsharpobjectstooperatethetouchpanel.
Scratchesonthetouchpanelmaycause
mal-calibrationornon-functiontothepanel.
13. TheLCD paneldisplayisnot subjecttoshock or
vibration.Whenassemblingthecomputer,makesure
itissecurelyinstalled.
PDFcreated withpdfFactorytrialversion www.pdffactory.com

TableofContents
1. INTRODUCTION.............................................1-1
1.1. GENERAL INFORMATION ..................................1-2
1.2. WHAT COVERS IN THIS MANUAL.........................1-3
1.3. SPECIFICATIONS ...........................................1-4
2. USINGTHESYSTEM.......................................2-7
2.1. IDENTIFYING THE SYSTEM................................2-8
2.1.1. FrontView.............................................2-9
2.1.2. SideViews...........................................2-11
2.1.3. Dimension...........................................2-12
2.1.4. WallMounting......................................2-13
2.1.5. PanelPC I/OOutlets.............................2-14
2.2. SYSTEM SETUPFOR THE FIRST-TIME USE ............2-15
2.2.1. InstallationProcedures..........................2-15
2.2.2. RunningtheBIOSSetup.......................2-16
2.2.3. OperatingSystemandDriverInstallation2-17
3. HARDWAREINSTALLATIONANDUPGRADE.3-19
3.1. PANEL PC ASSEMBLY....................................3-22
3.1.1. TouchscreenModule.............................3-22
3.1.2. LCDModuleAssembly...........................3-23
3.1.3. MB &TouchController Assembly............3-25
3.1.3.1. InstallingtheCPU...........................3-25
3.1.3.2. InstallingtheSDRAMMemoryModule3-26
3.1.3.3. MB &TouchControllerAssembly.......3-27
3.1.3.4. I/O ModuleAssembly......................3-29
3.1.3.5. Security DoorModuleAssembly........3-30
3.1.3.6. CD-ROMModuleAssembly...............3-31
3.1.4. PanelPC ModuleAssembly....................3-32
3.2. KIOSK CABINET &PERIPHERAL ASSEMBLY ...........3-34
3.2.1. HDD ModuleAssembly..........................3-34
3.2.2. Power ModuleAssembly........................3-35
3.2.3. PrinterModuleAssembly.......................3-36
3.2.3.1. PrinterModuleAssembly..................3-36
3.2.3.2. PrinterPower ModuleAssembly........3-38
3.2.4. MediaReader/CD-ROMModuleAssembly3-39
PDFcreated withpdfFactorytrialversion www.pdffactory.com

3.2.5. KioskCabinetIntegration......................3-40
3.2.5.1. LIBRAwithprinter bezelintegration..3-40
3.2.5.2. LIBRAwithMediareaderbezelintegration
3-43
3.3. KIOSK INTEGRATION ....................................3-45
4. SYSTEMMOTHERBOARD&I/OBOARD........4-47
4.1. LIBRA MOTHERBOARD .................................4-48
4.1.1. GeneralInformation.............................4-48
4.1.2. Specifications.......................................4-49
4.1.3. LocatingJumpers&Connectors..............4-51
4.1.4. Jumpers&Jumper Setting.....................4-52
4.1.4.1. DOC2000AddressSetting(JP2).......4-52
4.1.4.2. LCD InterfaceSelect(JP5)...............4-52
4.1.4.3. ClearCMOS (JP9)...........................4-52
4.1.4.4. AT/ATXpower selection(JP11).........4-52
4.1.5. Connectors&PinAssignment.................4-53
4.1.5.1. ATXP1:ATXPower connector............4-54
4.1.5.2. CN1:TouchscreenPower Connector..4-54
4.1.5.3. PWR1:CD-ROMPowerConnector....4-54
4.1.5.4. INV1:LCD InverterConnector..........4-55
4.1.5.5. LCD1:LVDS Connector....................4-55
4.1.5.6. LCD2:TTLConnector......................4-56
4.1.5.7. IDE1/IDE2:Primary/SecondaryHDD.4-57
4.1.5.8. FDD1:FDD connector......................4-58
4.1.5.9. COM2:...........................................4-58
4.1.5.10. COM3............................................4-59
4.1.5.11. CD1:CD AudioIN..........................4-59
4.1.5.12. IR1:IR/CIRConnector....................4-59
4.1.5.13. CN4:Power LED&EXT.KB/MS,USB.4-60
4.1.5.14. IOINF1:I/O Slot............................4-60
4.1.5.15. CN4:PCI/ISAExpansionSlot............4-61
4.1.5.16. FAN1~3:FANConnector..................4-64
4.1.5.17. JP6:ExternalSMIConnector............4-64
4.1.5.18. CN3:ATXPower ON/OFF&Reset......4-64
4.1.5.19. RST1:RESETSYSTEMConnector......4-64
4.1.5.20. CN2:ExternalLANWAKE-UP............4-64
4.2. LIBRA I/O BOARD .....................................4-65
4.2.1. I/O Board-IO005..................................4-66
PDFcreated withpdfFactorytrialversion www.pdffactory.com

4.2.1.1. Jumper Setting &Connectors ......4-67
4.2.1.2. Jumpers&Jumper Setting...............4-67
4.2.1.3. CN4:EXT.Connector.......................4-67
4.2.2. IOBoard-IO006...................................4-68
4.2.2.1.1.Jumpers&Jumper Setting...............4-69
4.2.2.2. CN6:EXT.Connector.......................4-69
4.2.3. Connectors&PinAssignment.................4-70
4.2.3.1. Keyboard:PS/2KBConnector..........4-71
4.2.3.2. Mouse: PS/2 Mouse.........................4-71
4.2.3.3. COM1,COM2,COM4 (DB-9)............4-71
4.2.3.4. DC Power: DC Power Output...........4-71
4.2.3.5. LPT1:D-SUB-25 ParallelPort............4-72
4.2.3.6. CRT:VGA (D-SUB 15Pin)................4-72
4.2.3.7. FDD:ExternalFDD Connector..........4-72
4.2.3.8. J11:USB1,USB2Connector...........4-73
4.2.3.9. DIO1:RJ-11 Connector...................4-73
4.2.3.10. LAN1:RJ-45EthernetConnector......4-73
4.2.3.11. MIC1.............................................4-73
4.2.3.12. LINE1...........................................4-74
4.2.3.13. SPK1............................................4-74
5. AWARD BIOSSETUP....................................5-75
5.1. AWARD BIOS..........................................5-76
5.2. CONTROL KEY DEFINITION .............................5-77
5.3. GETTING HELP ...........................................5-78
5.3.1. Main Menu...........................................5-78
5.4. AWARD BIOS SETUP..................................5-78
5.4.1. AWARD BIOSSetupMainMenu..............5-78
5.4.2. StandardCMOS Features.......................5-80
5.4.3. AdvancedBIOS Features.......................5-83
5.4.4. AdvancedChipsetFeatures....................5-87
5.4.5. IntegratedPeripherals..........................5-89
5.4.6. Power ManagementSetup.....................5-93
5.4.7. PnP/PCIConfiguration...........................5-94
5.4.8. PC HealthStatus..................................5-96
5.4.9. Frequency VoltageControl.....................5-97
5.4.10. Load Fail-SafeDefaults.........................5-98
5.4.11. Load OptimizedDefaults........................5-99
5.4.12. UserPassword...................................5-100
PDFcreated withpdfFactorytrialversion www.pdffactory.com

5.4.13. SaveandExitSetup...........................5-101
5.4.14. ExitWithoutSaving............................5-102
6. SOFTWARE&DRIVERS INSTALLATION.....6-103
6.1. SYSTEM CHIPSET DRIVERS...........................6-104
6.2. IDE ACCELERATION DRIVERS........................6-104
6.3. ETHERNET DRIVERS...................................6-105
6.4. PC620 AGP XGA....................................6-106
6.5. AUDIO SETUP ..........................................6-107
6.6. TOUCHSCREEN DRIVERS..............................6-108
6.7. PERIPHERAL DEVICE DRIVERS .......................6-109
6.8. DRIVER INSTALLATION ................................6-110
APPENDIX..........................................................6-111
A: LCD SPECIFICATION .........................................6-111
B: DIO (DIGITAL INPUT &OUTPUT)..........................6-114
C: DISKONCHIPINSTALLATION ..............................6-116
D: SYSTEM I/O PORTS..........................................6-117
E: WAKE-ON-LAN...............................................6-118
F: FIRST MB MEMORY MAP .....................................6-121
G: POWER SUPPLY ...............................................6-122
H: 8-IN-1 CARD READER .......................................6-125
I: THERMAL PRINTER ............................................6-127
PDFcreated withpdfFactorytrialversion www.pdffactory.com

PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E) 1-1
1. INTRODUCTION
Thischapter providesbackground
informationanddetailspecificationon
theLIBRAIII.Sectionsinthischapter
include:
uGeneralInformation
uWhatcoversinthisManual
uSpecification
PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E)
1-2
1.1. General Information
Theinformationrevolutionthatstartedfromthemid’90
inauguratedanewcompetitiveerawhere consumer-
computingtechnologywasexploitedtobusinessoperation
quickerthaneverbefore.Manyenterprisesfrom ourlife
relatedindustriessuchas POS, POI, Kiosk, Banking,
Medical tothehigh-tech Telecom, Aerospace,
Semiconductor …etc.allare eagerorforcedto automate
theirindustrieswithPCsinorder tothrivein thisnewage.For
theirindustrialautomation,thereisonethingincommon,i.e.
spaceisalways apremiumandsystem stabilityisalways a
mustintheirenvironmentalapplications.
Compactinitsprofileandself-containedinitsfunctions,the
LIBRA120 isa12.1"TFTIntelSocket370 Celeron/Pentium
IIIorSocket478Celeron-basedminiKiosk.Byintegratinga
thermalreceiptprinter andaswipecardreader,theLIBRA
Kiosk canbeusedasapointofsaleandpoint of information
solutionforbankers,photoprocessors,retailers,photokiosk
operators,OEMs,andPOS manufacturers…etc….With
changeablefrontbezeldesign,theLIBRAcanbeeasily
tailoredtoaccommodatedifferent peripheraldevicestomeet
specificenvironmentalrequirements.
Fullyconfigurableandwith itssleekoutlook,theLIBRAisan
idealplatform foranyspace-constrictedretailapplication
PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E) 1-3
1.2. WhatCoversinthisManual
Thishandbookcontainsmostinformationyouneedtosetup
andusetheLIBRAIV system.Onlyservicetechniciansare
allowedtoopenthesystem forservice. Youdonotneedto
read everythinginthishandbooktousethesystem.
Chapter 1 (thecurrentchapter)providesbackground
informationanddetailspecificationontheLIBRA
III.
Chapter 2 identifiestheLIBRA systemexteriorcomponents
andprovidesinstructionstohelpyoutousethe
system assoonaspossible.
Chapter 3 helpsyoutorecognizetheLIBRA systeminternal
modules.Italsoprovidestheinstallation
proceduresincludingthepanelPC, display
moduleandperipheralmodules.
Chapter 4 providesdetailinformationofthejumper settings
andconnectorsignalsofthesystem control
board.
Chapter 5 explainstheAWARDBIOSsetup.
Chapter 6 introducestheEthernet,XGA,audioand
touchscreendrivers.
AppendixA detailsthe12.1”LCD specifications.
AppendixB introducesthesystem’sonboardDIO.
AppendixC introducestheDiskOnChipinstallation.
AppendixD introducestheWake-On-LANfeature.
AppendixE describesthesystemIOportaddress
AppendixF explainsthefirstMB memorymap.
AppendixG providesthespecificationsforthebuilt-inpower
supply.
AppendixH providesthespecificationsforthe8-in-1cardreader.
AppendixI providesthespecificationsforthethermalprinter.
PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E)
1-4
1.3. Specifications
LIBRAIII:12.1”TFTIntel®Socket370 CeleronMiniKiosk
DisplayModule
uLCD
²12.1”colorTFT,800*600
²Luminance(cd/m2): 150 orabove
²Simultaneousmode: yes
uTouchscreen
²12.1”analogresistivetypewith RS-232 controller
²12.1”capacitivetypewithRS-232controller
Panel PC
uMotherboard:PC620
uCPU(Socket370):
²IntelPentiumIIIFCPGA1GHz/133MHz
²IntelPentiumIIIFCPGA650-933/133MHz
²IntelPentiumIIIFCPGA500E-850E/100MHz
²IntelCeleronFCPGA 800MHz-1.10GHz/100MHz
²IntelCeleronFCPGA 533AMHz-766MHz/66MHz
²IntelCeleronPPGA300A-533MHz/66MHz
uSystem Chipset:Intel815E
uSystem BIOS:AwardPnPFlashBIOS
uSystem Memory:2*168pin DIMM socketsupporting
SDRAMupto512MB
uL2 Cache: CPU built-in
uEthernet
²100/10 Base-TEthernetwithRJ-45 phonejack
²SupportsWAKE-ON-LAN
PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E) 1-
5
uDisplay
²Novatek NT68521 scaler
²LVDS/24 bitTTLLCD Interfaceviajumper setting
²Integrated2D/3Dgraphics engine,4XAGP
²Sharesystemmemory architectureabletoutilize
thedisplaymemory sizeupto64MB
uStandard I/O (InsidetheKiosk cabinet)
²Serialports*4:COM1,2&4 with+5V/12 power
output onpin#9,COM3internaltypereservedfor
touchscreen,COM2RS-232/485 jumper selectable
²ParallelPort*1:supportsSPP/EPP/ECP
²ExternalFDD Interface*1
²+5V/+12VDC-out*1
²PS/2KeyboardInterface*1
²PS/2 MouseInterface*1
²DIO: Input*2,output*2
²USBInterface*2
²VGAInterface*1
²Brightness VR*1
²Speaker-out,MIC-in,Linein
uAudioFunction
²Fullduplex andindependentsamplerateconverter
foraudiorecording&playback
²SupportsMicrosoftDirectSound
²3Dpositionalaudioeffects
²Hi-performance,mixed-signal,stereo
²MIC-In,Speaker-Out,Line-In
²Pin headerforCD-audioin
PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E)
1-6
uHardware Monitor
²Monitoringprocessor&system
²Monitoring5VSB,VBAT,1.5V,3.3V,+5V,+12V,-12V,
andprocessorvoltages
²Monitoringprocessor,chassisfanspeeds
²Controllingprocessor,chassisfanspeedandfailure
alarm
²Automaticfanon/off control
²Read backcapabilitythatdisplaystemperature,
voltageandfanspeed
²SupportingIntelprocessorthermaldiodeoutput
(realprocessortemperature)
uPowerSupply: ATX180W,inputrange,100~240VAC
uDriveBay
²3.5"HDD*1
²Slim CD-ROMorequivalentdevice*1
uSpeakers*2
uExternal USB*2
uFrontBezel options
²Printerbezel
²Mediacardreaderbezel
PERIPHERALDEVICES (optional)
uMagneticcardreader –swipetype,trackI,II&III
uThermalreceiptprinter(Printerbezel)
u8-in-1mediareader (Cardreader bezel)
MECHANICAL&ENVIRONMENTAL
Construction:heavy-duty steel
Dimension:350 x365 x295 mm (W*H*D)
§Specificationsaresubjectto changewithout notice.
PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E) 2-7
2. USINGTHE SYSTEM
uIdentifyingtheLIBRA Kiosk
uSystemsetupforthefirst-timeuse
PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E)
2-8
2.1. IdentifyingtheSystem
TheLIBRAKiosk featureswithchangeablefrontbezeldesign
abletoaccommodatedifferentperipheralstofitintospecific
business requirements.Ithastwostandardfrontbezel
options;oneisLIBRAwith printer bezel toaccommodatean
Epsonopen-framedthermalreceiptprinterasillustratedin
Fig.2-1andtheotherisLIBRAwith mediacardreader bezel,
toaccommodatean8-1 mediacardreaderasillustratedin
Fig.2-2.
DuetotheKioskcabinetinternalspacerestriction,whenthe
LIBRAisintegratedwiththereceiptprinter,nointernalmedia
cardreader canbeintegratedintotheKioskcabinetandthe
internalslimCD-ROMneedstobeinstalledwith thepanelPC
moduleandtobeaccessedfromtherightsideof theKiosk
cabinet.WhentheLIBRAunitisintegratedwithan8-1
mediacardreader,nointernalthermalreceiptprintercanbe
installedintotheKioskcabinetandtheinternalslimCD-ROM
canbeintegratedwiththemediareader fromeasy access
fromthefront.
Beforegettingstarted,takeamoment tofamiliarizeyourself
withtheLIBRAsystemwithdifferentperipheralbezels.
PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E) 2-9
2.1.1.FrontView
WhentheLIBRA withprinterbezelisputupright onthe
desktop,itsfrontviewappearsasbelow.
SlimCD-ROM 12.1”LCD&
Touchscreen
Acrylicbezel
FIGURE 2-1: LIBRA W PRINTER BEZEL FRONT VIEW
USB x 2
Thermalprinter
PDFcreated withpdfFactorytrialversion www.pdffactory.com

UserManualversion2503
LIBRA120 III (PC620 Intel 815E)
2-10
WhentheLIBRA withmediacardreader bezelisputupright
onthedesktop,itsfrontviewappearsasbelow.
FIGURE 2-2: LIBRA W MEDIACARDREADER BEZEL FRONT VIEW
SlimCD-ROM
12.1”LCD&
Touchscreen
Acrylicbezel
USB x 2
8-1 mediacard reader
PDFcreated withpdfFactorytrialversion www.pdffactory.com