Maretron MPOWER CLMD12 User manual

CLMD12
12 Channel DC Load Controller Module
Quick Start Guide
P/N: M003138
Rev.1.2 (3/2021)
Copyright ©2021 Carling Technologies, Inc.
60 Johnson Ave.
Plainville, CT
06062 USA
All Rights Reserved
https://www.maretron.com

This Page Intentionally Left Blank

Thank you for purchasing MPower CLMD12
The CLMD12 features 75A total current switching capacity using 12 PWM capable
Electronic Circuit Breakers (ECBs) housed inside an IP67, Ignition Protected casing.
Configure the CLMD12 using Maretron N2KAnalyzer® installed on a PC and an
IPG100 or USB100 connected to the NMEA 2000® Network.
CLMD12 Features at a Glance:
·1- NMEA 2000® Interface
·2-12A ECBs
·6-10A ECBs
·4- 5A ECBs
·7- Analog (VDC) / Digital Inputs can sense DC (-), DC (+) or Float states
·4- Potential Groups of 2 ECB load outputs rated at 10A can be paralleled to
switch a maximum current of 18A
·3- Potential Groups of 2 ECB load outputs rated at 5A can be paralleled to switch
a maximum current of 9A
·1- Pair of 2 ECB load outputs rated at 12A can be paralleled to switch a maximum
current of 22A
·The CLMD12 unit is controlled, and can control devices via NMEA 2000® network
technology.
To learn more about the MPower CLMD12's features please refer to the User's
Manual located on the Blue USB Disc. See launch instruction below to access
USB Disc Menu.
P/N: M003138 Rev.1.2Page 1

CLMD12 Hardware Description:
5.10
[129.5]
2.80
[71.1]
4.11
[104.4]
4.99
[126.6]
"J1" CONNECTOR "J2" CONNECTOR "J3" NMEA 2000
CONNECTOR
J1 J2 J3
IEC
MORE INFO
BARCODE
QR
Model: CLMD12 P/N: M000000
12 Channel DC Load Module
6.5-32VDC 50mA NMEA 2000 LEN: 1
S/N: 0000000
5.71
[145.1]
MAIN DC (+)
CLMD12 Application:
Apply the CLMD12 unit with any Maretron device running N2K view®, Maretron's CKM12
(12 Button Keypad) or VMM6 (Contura® Digital Switch Module, 6 Rocker) and third party MFDs
supporting NMEA2000® standard switching PGNs. The CLMD12 comes pre-configured with an
Out of Box Configuration that allows all 12 ECB outputs to be switched by network devices
supporting NMEA2000® standard switching PGNs. The CLMD12's Out of Box Configuration also
allows for Maretron's CKM12 (12 Button Keypad) and VMM6 (Contura® Digital Switch Module, 6
Rocker) to control CLMD12 without the need for any user configuration adjustments. Please see
the Out of Box Configuration details in this Quick Start Guide for information on the CLMD12's
default configuration and how this configuration will behave when a CLMD12 is combined on the
same network as Maretron CKM12 or Maretron VMM6 also containing their own default Out of
Box Configuration.
Note: Depending on desired switch control, default configuration may not work for your
application and custom configuration will be needed using Maretron N2KAnalyzer®.
P/N: M003138 Rev.1.2Page 2
UNIT: INCH [MM]

Installation Principle:
DC (+)
DC (+) J1
Connect to CLMD12 Using Maretron's
CLMD12 Accessory Harnesses
(Terminal Strip not Included) Or
Connect to CLMD12 Using Deutsch Brand
Plugs in Your Own Vessel Harnessing
Add Optional Maretron
CBMD12 (12 Channel DC
Bypass Module) for Manual
Override Capability
Integrate CLMD12
Utilizing
NMEA 2000®
Network
Components
Available From
Maretron
J1 J2 J3
CLMD12
IEC
MORE INFO
BARCODE
QR
Model: CLMD12 P/N: M000000
12 Channel DC Load Module
6.5-32VDC 50mA NMEA 2000 LEN: 1
S/N: 0000000
Move "J1" Connector from
CLMD12 to CBMD12 to
Enable Circuit Bypass
Switches on CBMD12
Module
CBMD12
P/N: M003138 Rev.1.2Page 3

MARETRON CKM12
TOUCH SCREEN CONTROL
AND MONITOR
J1 J2 J3
IEC
MORE INFO
BARCODE
QR
Model: CLMD12 P/N: M000000
12 Channel DC Load Module
6.5-32VDC 50mA NMEA 2000 LEN: 1
S/N: 0000000
MARETRON CLMD12
MARETRON VMM6
Other
NMEA 2000®
Devices:
·Stereo
·VHF
·Depth
Choose From a Variety of
Control Devices for the
CLMD12
MARETRON TSM810C
TOUCH SCREEN CONTROL
AND MONITOR
THIRD PARTY MFD
Easily Expand Your
MPower System With
Another CLMD12 or Other
Maretron MPower Devices
1357911
12
10
8
6
42
PWR
GND
J 1 J 2 J 3
1 2 3 4 5 6 7 8
161514131211109
OVERRIDE
MPOWER
16 Channel DC Load Module
DIAG
CAN-A
CAN-B
POWER
12345678
161514131211109
LED: Touch Switch
Green ON, steady (Output is activated)
ON, flashing (Overcurrent / short circuit)
Red OFF, (Normal operation)
ON, flashing (Failure, service required)
LED: CAN
Blue ON, steady (Fault)
ON, flashing (Normal operation)
OFF, (No communication)
LED: POWER
LED: DIAGNOSTICS
Green ON, steady (Normal operation)
ON, flashing (Unit exceeded 125A Max)
Red ON, steady (Reverse polarity)
www.maretron.com
[phone]
CLMD16
8-32VDC 125A
LEN: 1 (50mA)
- J4 / CAN-A - -J5 / CAN-B -
MORE INFO
S/N: 0000000
BARCODE
QR
MARETRON CLMD16
P/N: M003138 Rev.1.2Page 4

CLMD12 Out of Box Configuration Module Details:
Toggle On / Off
J1 J2 J3
CLMD12
J1-8
J1-10
J1-11
J1-9
J1-6
J1-4
J1-1
J1-3
J1-5
J1-7
5A Outputs:
J2-2
J2-7
J2-1
J2-8
J2-4
J2-5
J2-3
MAIN GROUND
Inputs:
10A Outputs:
12A Outputs:
J1-2
J1-12
J2-6
IEC
MORE INFO
BARCODE
QR
Model: CLMD12 P/N: M000000
12 Channel DC Load Module
6.5-32VDC 50mA NMEA 2000 LEN: 1
S/N: 0000000
Breaker 12 / (5A)
Breaker 8 / (5A)
Breaker 10 / (5A)
Breaker 11 / (5A)
Breaker 5 / (5A)
Breaker 2 / (5A)
Breaker 1 / (5A)
Breaker 9 / (5A)
Breaker 6 / (5A)
Breaker 3 / (5A)
Breaker 7 / (5A)
Breaker 4 / (5A)
Pin:Pin:
Output Mode:
Breaker 7 Toggle
DC(-) or DC(+)
Breaker 6 Toggle
DC(-) or DC(+)
Breaker 5 Toggle
DC(-) or DC(+)
Breaker 4 Toggle
DC(-) or DC(+)
Breaker 3 Toggle
DC(-) or DC(+)
Breaker 2 Toggle
DC(-) or DC(+)
Breaker 1 Toggle
DC(-) or DC(+)
Toggle On / Off
Toggle On / Off
Toggle On / Off
Toggle On / Off
Toggle On / Off
Toggle On / Off
Toggle On / Off
Toggle On / Off
Toggle On / Off
Breaker 4: Toggle On / Off
Output Mode:
Breaker 7: Toggle On / Off
P/N: M003138 Rev.1.2Page 5

1
MARETRON CKM12
MARETRON VMM6 (6 Switch)
CLMD12 Out of Box Configuration Switch Bank Details:
3579
11
12
10
8
6
4
2
Brkr. 4 Toggle On / Off
Brkr. 5 Toggle On / Off
Brkr. 4 Toggle On / Off
Brkr. 3 Toggle On / Off
Brkr. 6 Toggle On / Off
Brkr. 7 Toggle On / Off
Brkr. 9 Toggle On / Off
Brkr. 8 Toggle On / Off
Brkr. 6 Toggle On / Off
Brkr. 1 Toggle On / Off
Brkr. 2 Toggle On / Off
Brkr. 11 Toggle On / Off
Brkr. 12 Toggle On / Off
Brkr. 3 Toggle On / Off
Brkr. 1 Toggle On / Off
MARETRON VMM6 (7 Switch)
Brkr. 3 Toggle On / Off Brkr. 4 Toggle On / Off
Brkr. 5 Toggle On / Off
Brkr. 2 Toggle On / Off
Brkr. 6 Toggle On / Off
Brkr. 7 Toggle On / Off
Ind. 1
Ind. 3
Ind. 5
Ind. 7
Ind. 9
Ind. 11
Ind. 3
Ind. 5
Ind. 7 Ind. 9
Ind. 11
Ind. 12
Brkr. 2 Toggle On / Off
Brkr. 10 Toggle On / Off
Brkr. 5 Toggle On / Off
Brkr. 1 Toggle On / Off
Ind. 1
P/N: M003138 Rev.1.2Page 6

Technical Support:
If you require technical support for Maretron products,
you can reach us in any of the following ways:
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
World Wide Web: https://www.maretron.com
Mail: Carling Technologies, Inc.
Attn: Maretron Technical Support
120 Intracoastal Pointe Dr.
Jupiter, FL 33477 USA
For Additional Information About Your CLMD12
Scan this QR Code:
CLMD12
12 Channel DC Load Controller Module