Mark-10 E Series User manual

Series E
Advanced Ergonomics Kits
Quick Start Guide
USB driver
in the user’s guide.
PC requirements
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: [phone]
[email protected]
www.mark-10.com
User’s Guide
SeriesE.pdf
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Thank you!
Thank you for purchasing a Mark-10 Series
E Ergonomics Kit. Please read through this
Quick Start Guide and the complete force
gauge User’s Guide before using this kit.
Series E Advanced Ergonomics Kits
IMPORTANT SAFETY CONSIDERATIONS
Force gauges are sensitive instruments that must be treated with care. Please
review the yellow safety information card included in the box, as well as the safe-
ty information provided in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS:
Qty. Part No. Description EKE (Advanced Kit) EKE (Professional Kit)
-100-1 -200-1 -500-1 -100-2 -200-2 -500-2
1 ME-100 Ergonomics force gauge, 100 lbF - - - -
1 ME-200 Ergonomics force gauge, 200 lbF - - - -
1 ME-500 Ergonomics force gauge, 500 lbF - - - - 
1 08-1022 AC adapter body with US, EU,
UK, or AUS prong 
1 08-1026 Battery (inside the gauge) 
1 09-1165 USB cable 
4 10-1023 Thumb screw, #6-32 
1 E1002 Padded attachment, square - 
1 E1003 Padded attachment, rectangular 
1 E1004 Padded attachment, curved 
1 E1005 Padded attachment, circular - 
1 E1006 Snap Hook 
1 E1007 Chain / hook assembly - 
1 E1008 Single handle grip - 
1 E1009 Double handle grip 
1 E1010 Pistol grip - 
1 E1000 Carrying case, small -
1 E1001 Carrying case, large - 
2
3
-
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Thank you!
Series E Advanced Ergonomics Kits
Qty. Part No. Description
1 ME-100
1 ME-200
1 ME-500
1 08-1022 UK, or AUS prong
1 08-1026
1 09-1165 USB cable
4 10-1023 Thumb screw, #6-32
1 E1002
1 E1003
1 E1004
1 E1005
1 E1006 Snap Hook
1 E1007 Chain / hook assembly
1 E1008 Single handle grip
1 E1009 Double handle grip
1 E1010 Pistol grip
1 E1000 Carrying case, small
1 E1001 Carrying case, large
2
3
INSTALLING ACCESSORIES
Double and Single Handles
POWER
Press the button to power on the gauge. Press and hold to power o󰀨. The
gauge is powered either by the internal rechargeable battery or an AC adapter/
charger. The battery will last approximately 7 hours with the backlight turned on,
and 24 hours with the backlight turned o󰀨 before recharging is necessary.
Attachments
Ergonomics attachments (E1002 - E1010) are mounted to the gauge’s receptacle
via the Click-Lock®mechanism. Line up the attachment with the receptacle and
press until a click occurs. The attachment may be inserted in 90° or 180° orienta-
tions as shown below. To release the the attachment, pull back on the lever in the
rear of the housing, as shown below:
INSTALLING MESUR®SOFTWARE
MESUR®Lite
Free basic data acquisition application, for data tabulation and exporting to Excel.
MESUR®gauge
Data tabulation, graphing, analysis, and reporting, with user-congurable start
and stop triggers and other tools. Compatible with all Mark-10 instruments. Free
90-day evaluation.
Attach the force gauge to the double
handle grip (AC1003) or single handle grip
(AC1003-1) by mating the male dowel pin in
the cradle to the corresponding hole in the
rear of the force gauge housing.
Then, fasten the gauge to the cradle with
four included thumb screws (10-1023), as
shown at left.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Series E
32-1254
052022
USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter. Re-
quired for communication with a PC. Follow the installation instructions provided
in the user’s guide.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor res-
olution is 1108 x 758. A USB or RS-232C serial port is required. If USB communi-
cation is required, install the Mark-10 USB driver.
Series E Advanced Ergonomics Kits
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Series E
ERGONOMICS FORCE GAUGES
Quick Start Guide
grips, software, and more.
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: [phone]
Fax: [phone]
www.mark-10.com
[email protected]
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Thank you!
Thank you for purchasing a Mark-10 Series E Digital Force
Gauge and accessories. We are condent that you will get many
years of service from this product. Series E gauges may be used
in a variety of push and pull testing application. Please read
through this Quick Start Guide and the complete User’s Guide be-
fore using the gauge.
Series E Ergonomics Force Gauges
IMPORTANT SAFETY CONSIDERATIONS
Force gauges are sensitive instruments that must be treated with care. Please
review the yellow safety information card included in the box, as well as the safety
information in the User’s Guide prior to operating the gauge.
LIST OF INCLUDED ITEMS:
Quick Start Guide
Qty. Part No. Description
1 12-1049 Carrying case
1AC1030 / AC1031 /
AC1032 / AC1035 AC adapter w/US, EU, UK, or AUS prong
1 08-1026 Rechargeable NiMH battery
(inside gauge)
1 - Certicate of calibration
1 09-1165 USB cable
2
3
OPTIONAL ITEMS:
A number of attachments are available, as pictured below. They may be pur-
chased individually or as kits.
-
-
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]

Thank you!
POWER
Quick Start Guide
Press the button to power on the gauge. Press and hold to power o󰀨. The
gauge may be powered either by the internal rechargeable battery or an AC adapter/
charger. The battery will last approximately 7 hours with the backlight turned on,
and 24 hours with the backlight turned o󰀨 before recharging is necessary.
Qty. Part No.
1 12-1049
1AC1030 / AC1031 /
AC1032 / AC1035
1 08-1026
1 -
1 09-1165
2
3
OPTIONAL ITEMS:
chased individually or as kits.
INSTALLING ATTACHMENTS
Attachments are mounted to the gauge’s receptacle via
the Click-LockTM mechanism. Line up the attachment with
the receptacle, and press in until a click occurs. The at-
tachment may be inserted in 90- or 180-degree orienta-
tions. To release the attachment, pull back on the lever in
the rear of the housing, as shown at left.
LITERATURE & SOFTWARE DOWNLOADS
1. User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product
and read it thoroughly before use.
2. USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter.
Required for communication with a PC. Follow the installation instructions
provided in the user’s guide.
3. MESUR®family of software – see below.
INSTALLING MESUR®SOFTWARE
Mark-10 o󰀨ers three data collection applications:
MESUR®Lite
Free basic data acquisition application, for data tabulation and exporting to
Excel. Compatible with gauges only, not test stands.
MESUR®gauge / MESUR®gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-congurable start
and stop triggers and other tools. Compatible with gauges and test stands for
load vs. time or load vs. travel. MESUR®gauge Plus adds test stand motion
control coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
www.GlobalTestSupply.com
Find Quality Products Online at: [e-mail]