Mark-10 M3I User manual

Model M3I
FORCE / TORQUE INDICATOR
Quick Start Guide
OTHER MARK-10 PRODUCTS
A full line of force and torque measurement products and related items,
including force gauges, torque gauges, force and torque test stands, sensors,
grips, software, and more.
Force and torque measurement engineered better
Mark-10 Corporation
11 Dixon Avenue
Copiague, NY 11726
888-MARK-TEN
Tel: [phone]
Fax: [phone]
www.mark-10.com
[email protected] 32-1213
121119

Thank you!
Thank you for purchasing a Mark-10 Model M3I Force/Torque In-
dicator. We are condent that you will get many years of service
from this product.
The M3I is designed to work with a wide range of Mark-10 Plug &
Test®remote smart force and torque sensor. Please read through
this Quick Start Guide and the complete User’s Guide before us-
ing the gauge.
Model M3I Force/Torque Indicator
IMPORTANT SAFETY CONSIDERATIONS
Force and torque measuring instruments are sensitive and must be treated with
care. Please review the safety information provided in the User’s Guide prior to
operating the indicator.
LIST OF INCLUDED ITEMS:
Quick Start Guide
OVERVIEW
To power on the indicator, press the button. Press and hold to power o󰀨.
The indicator may be powered either by the internal rechargeable battery or an
AC adapter/charger. The battery will last approximately 7 hours with the backlight
turned on, and 24 hours with the backlight turned o󰀨 before recharging is necessary.
The M3I indicator must be used with a Plug & Test®remote smart sensor. All
conguration and calibration data is saved within the sensor’s connector. Although
the menu may be accessed if the sensor is not connected, changes will not be
saved. Refer to the M3I User’s Guide for further details.
LITERATURE & SOFTWARE DOWNLOADS
Download at: www.mark-10.com/downloads
1. User’s guides (PDF)
Provided for all Mark-10 instruments. Locate the user’s guide for this product
and read it thoroughly before use.
2. USB driver
For Mark-10 instruments and the model RSU100 RS-232 to USB converter.
Required for communication with a PC. Follow the installation instructions
provided in the user’s guide.
3. MESUR®family of software – see below.
INSTALLING MESUR®SOFTWARE
Mark-10 o󰀨ers three data collection applications:
MESUR®Lite
Free basic data acquisition application, for data tabulation and exporting to Excel.
Compatible with gauges only, not test stands.
MESUR®gauge / MESUR®gauge Plus
Data tabulation, graphing, analysis, and reporting, with user-congurable start and
stop triggers and other tools. Compatible with gauges and test stands for load
vs. time or load vs. travel. MESUR®gauge Plus adds test stand motion control
coordination. Both applications can be evaluated for 90 days.
PC requirements
Compatible with PCs running Microsoft Windows 7 or later. Minimum monitor
resolution is 1108 x 758. A USB or RS-232C serial port is required. If USB
communication is required, install the Mark-10 USB driver.
Qty. Part No. Description
M3I M3IE M3IU M3IA
1 12-1049 12-1049 12-1049 12-1049 Carrying case
1 AC1030 AC1031 AC1032 AC 1035 AC adapter/charger w/US,
EU, UK, or AUS prong
1 08-1026 08-1026 08-1026 08-1026 Rechargeable NiMH battery
(inside gauge)
1 - - - - Certicate of calibration
1 09-1165 09-1165 09-1165 09-1165 USB cable
2 3