MARS COMMERCE SOLO-IDEA User manual

SOLO–IDEA
COMPACT GSM DOOR ENTRY UNIT WITH 1, 2 or 4 CALL BUTTONS
INSTALLATION MANUAL
Version: Solo-IDEA - Installation-Manual_V1_0-11052017.doc
Valid from SW release: “SOLO_EF_B_ON_PCK_20170412_v_3_4_3”.

SOLO-IDEA
INSTALLATION MANUAL
Page 2
Contents
1FOR YOUR SAFETY..............................................................................................................................................4
2INTRODUCTION....................................................................................................................................................4
3FEATURES AND APPLICATIONS......................................................................................................................4
4START UP.................................................................................................................................................................5
5LED DISPLAY .........................................................................................................................................................6
6CLEAR ALL PROGRAMMED DATA FROM SOLO-IDEA.............................................................................6
7CONNECTION DIAGRAM....................................................................................................................................7
8PROGRAMMING SOLO-IDEA............................................................................................................................7
9THE SOLO-IDEA PARAMETERS.......................................................................................................................8
9.1 ALARM SUPPORT...............................................................................................................................................................8
9.2 OUTPUT MANAGEMENT................................................................................................................................................11
9.3 SECURITY LEVEL - SL.....................................................................................................................................................13
9.4 PREPAID CARD CREDIT AND VALIDITY INFORMATION.......................................................................................13
9.5 SET-UP PARAMETERS.....................................................................................................................................................15
9.6 SMS MESSAGES EDITOR................................................................................................................................................18
9.7 GSM INTERCOM ...............................................................................................................................................................19
9.8 CALLER ID RECOGNITION - CLIP.................................................................................................................................22
9.9 EVENT LOGGING .............................................................................................................................................................23
9.10 SPECIAL SMS COMMANDS............................................................................................................................................24
10 PRINT-OUT OF THE PARAMETERS...............................................................................................................25
10.1 RECEIVE ALL PARAMETERS (PALL)...........................................................................................................................25
10.2 CHECK SW REVISION (PSW)..........................................................................................................................................25
10.3 CHECK SIGNAL QUALITY (PSQ)...................................................................................................................................25
10.4 RECEIVE TELEPHONE NUMBERS (PTN) .....................................................................................................................25
10.5 RECEIVE LINKS (PLN).....................................................................................................................................................25
10.6 RECEIVE INPUT PARAMETERS (PIN)...........................................................................................................................25
10.7 RECEIVE INPUT FILTER VALUE (PID).........................................................................................................................25
10.8 RECEIVE OUTPUT FILTER VALUE (POD) ...................................................................................................................26
10.9 RECEIVE DELAY BEFORE DIAL VALUE (PDD).........................................................................................................26
10.10 RECEIVE ACCESS TELEPHONE NUMBERS (PSL)......................................................................................................26
10.11 RECEIVE OUTPUT PARAMETERS (POS)......................................................................................................................26
10.12 RECEIVE ALL PROGRAMMED SMS MESSAGES (P#)................................................................................................26
10.13 RECEIVE SET UP PARAMETERS VALUE (PPA)..........................................................................................................26
10.14 RECEIVE CREDIT PARS PARAMETERS (PCREF) .......................................................................................................26
10.15 RECEIVE ALL CLIP PARAMETERS (PCLP)..................................................................................................................26
10.16 RECEIVE INTERCOM BUTTON 1 PARAMATERS (PDEA).........................................................................................27
10.17 RECEIVE INTERCOM BUTTON 2 PARAMATERS (PDEB).........................................................................................27
10.18 RECEIVE INTERCOM BUTTON 3 PARAMATERS (PDEC).........................................................................................27
10.19 RECEIVE INTERCOM BUTTON 4 PARAMATERS (PDED).........................................................................................27
10.20 STATE OF THE CREDIT FOR THE PREPAID CARD....................................................................................................27
10.21 STATE OF THE OUTPUTS (PORC) .................................................................................................................................27
10.22 MANUAL GSM MODULE RESTART (MRES)...............................................................................................................28
10.23 RECEIVE STATUS OF INPUTS (INS)..............................................................................................................................28

SOLO-IDEA
INSTALLATION MANUAL
Page 3
10.24 RECEIVE SOLO-IDEA LOG .............................................................................................................................................28
11 CHANGING PARAMETERS USING THE SMS COMMANDS.....................................................................29
12 DEFAULT SETTINGS ON SOLO-IDEA............................................................................................................30
13 PARAMETERS PRINT-OUT COMMANDS.....................................................................................................33
14 TECHNICAL SPECIFICATIONS.......................................................................................................................34
15 CONTACTS............................................................................................................................................................34
Figures
Figure 1: SOLO-IDEA Connection diagram .......................................................................................7
Figure 2: Input Connection diagram....................................................................................................8
Figure 3: Output Connection diagram ...............................................................................................11
Figure 4: Designation of Call buttons................................................................................................19
Tables
Table 1: IN, ID and DD parameters.....................................................................................................9
Table 2: IN, ID, DD parameters example............................................................................................9
Table 3: Remote alarm reporting parameters.....................................................................................10
Table 4: Remote alarm reporting example.........................................................................................10
Table 5: DTMF control example .......................................................................................................11
Table 6: Output management parameters ..........................................................................................12
Table 7: Output management parameters example............................................................................12
Table 8: SL parameter........................................................................................................................13
Table 9: SL example ..........................................................................................................................13
Table 10: Prepaid card validity parameters........................................................................................14
Table 11: Credit example...................................................................................................................15
Table 12: Set-up parameters. .............................................................................................................17
Table 13: Set-up parameters example................................................................................................18
Table 14: Message parameters...........................................................................................................18
Table 15: Message parameters example. ...........................................................................................19
Table 16: Intercom parameters. .........................................................................................................21
Table 17: Intercom parameters example............................................................................................21
Table 18: CLIP parameters. ...............................................................................................................22
Table 19: CLIP parameters example..................................................................................................22
Table 24: LOG parameters.................................................................................................................23
Table 25: LOG parameters example..................................................................................................23
Table 26: SMS commands.................................................................................................................24
Table 27: SMS commands example...................................................................................................24
Table 28: SOLO-IDEA default settings.............................................................................................32
Table 29: SOLO-IDEA parameters print out commands...................................................................33

SOLO-IDEA
INSTALLATION MANUAL
Page 4
1FOR YOUR SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete
user guide for further information.
SWITCH ON SAFELY
Do not switch the unit on when use of wireless phone is prohibited or when it may cause
interference or danger.
INTERFERENCE
All wireless phones and units may be susceptible to interference, which could affect performance.
SWITCH OFF IN HOSPITALS
Follow any restrictions. Switch the unit off near medical equipment.
SWITCH OFF IN AIRCRAFT
Follow any restrictions. Wireless devices can cause interference in aircraft.
SWITCH OFF WHEN REFUELING
Do not use the unit at a refueling point. Do not use near fuel or chemicals.
SWITCH OFF NEAR BLASTING
Follow any restrictions. Do not use the unit where blasting is in progress.
USE SENSIBLY
Use only in the normal position as explained in the product documentation. Do not touch the
antenna unnecessarily.
2INTRODUCTION
SOLO-IDEA is a simple GSM intercom communication system that is designed to ensure low-cost,
reliable and single box solution for intercom application. It is designed for unlimited range, wire
free GSM intercom and Caller ID recognition –CLIP support.
In addition SOLO-IDEA supports alarm detection, stay-alive messages, credit detection etc…
3FEATURES AND APPLICATIONS
Features:
Built-in 4 (2G) or 5 (3G) band GSM module
Up-to 4 intercom call button support (5 numbers each)
Caller ID numbers control (up-to 1000 caller ID numbers)
Up to 100 temporary SPIN access codes
Up to 1000 PIN access codes
2 outputs (relay supported)
Programming with PC via “USB to Mini USB cable” connected to the unit
Programming by WEB server
Programming by SMS commands
Applications:
Single box, wire free intercom solution
Remote gate opener –Caller ID number recognition

SOLO-IDEA
INSTALLATION MANUAL
Page 5
4START UP
VERY
IMPORTANT
USE A MICRO SIM CARD (micro-SIM, see the picture)
WITH MEMORY FOR UP TO 250 CONTACTS!
Insert SIM card to be used for SOLO-IDEA in your personal mobile phone.
IMPORTANT
ERASE THE PIN CODE!
Insert SIM card in SOLO-IDEA device. The unit must be switched OFF when you insert the
SIM!
Connect inputs and outputs to SOLO-IDEA.
Connect the antenna to antenna connector.
Connect power cable to SOLO-IDEA device
Connect device to source power supply voltage.
Wait until LED3 display is turned ON (Yellow) and LED1 (Blue) starts flashing. This is set
in around 30 –45 seconds.
SOLO-IDEA unit is now ready to operate.
IMPORTANT
Before sending any SMS commands to SOLO-IDEA device, SOLO-IDEA must
be in normal operation!
NOTE
SOLO-IDEA device will “beep” in 15s interval until the device is not in normal
operation.

SOLO-IDEA
INSTALLATION MANUAL
Page 6
5LED DISPLAY
BLUE LED (LED1)
-Indicates the level of the GSM signal from 1 to 5 LED flashes (1 is weak signal, 5 is
excellent signal)
RED LED (LED2)
-When LED 2 is ON the unit has a problem with a GSM network connection or the GSM
part of the unit is out of order. In this case immediately call the service!
YELLOW LED (LED3)
-Short flashing indicates that the GSM module is ON, but it is not yet connected on the GSM
network. After connection, Yellow LED is flashing with short pulse ON and a long pulse
OFF.
6CLEAR ALL PROGRAMMED DATA FROM SOLO-
IDEA
This is highly recommended when a SIM card you are going to use for the SOLO-IDEA is not new
and it already has some data stored in the phone book memory.
By sending this SMS to SOLO-IDEA all programmed parameters and numbers are cleared:
;SDCLR;
After sending SMS you should wait at least 30 second for the command to be executed!
NOTE
By sending this command to the SOLO-IDEA all programmed data are erased from the
SIM card, and from the memory inside the SOLO-IDEA device! After the device will
start it will be configured with factory defaults.

SOLO-IDEA
INSTALLATION MANUAL
Page 7
7CONNECTION DIAGRAM
Before connection the SOLO-IDEA please take a look at connection diagram.
Figure 1: SOLO-IDEA Connection diagram
*Do not use the Power out (12V AUX) for electric lock driving! You can use it to power external
sensors: Short-term current load (up to 1 minute) - up to 500mA; Long-term current load - up to
100mA! Useseparate power source for door electriclock!
8PROGRAMMING SOLO-IDEA
SOLO-IDEA device supports different types of programming:
*With direct USB connection (USB to Mini USB cable), with the use of configuration
software EasySet running on PC.
Remotely by sending text messages - SMS commands.
**Remotely with Android application or with IOS application.
***Remotely with Web server application –www.easyset.eu.
NOTES
*To receive configuration software for PC please contact your local distributor.
**You must download applications from Google play or App Store
***For using Web server, you must register to use it.

SOLO-IDEA
INSTALLATION MANUAL
Page 8
9THE SOLO-IDEA PARAMETERS
To support versatile functionality of SOLO-IDEA different parameters are used. The parameters are
divided in logical sections and are described in the following chapters.
9.1 ALARM SUPPORT
Alarm reporting is supported by group of different parameters. First section is used to define the
relations needed for alarm to be trigged. The second section is used to report alarm.
9.1.1 ALARM TRIGGERING
Parameters are used to control (filter) the triggering of the alarm inputs.
9.1.1.1 IN parameter
Alarm input can be on only used as normal open (N.O.) triggered with GND. When you need the
input feedback information it is possible to receive SMS when input returns from alarm to normal
position. To receive the return SMS use IN setting 4.
IN = 0 –Normal Open –triggered with negative voltage (GND)
IN = 4 = IN = 0 + input reset SMS
INPUT 1-2
GND
INPUT 1-2
N.O.
Contact N.O.
Contact
Figure 2: Input Connection diagram.
9.1.1.2 ID parameter
ID parameter determines time period of the pulse length to trigger the alarm. The pulse time can be
from 0,5 seconds to 9999 seconds. The default time is 0,5 seconds when the parameter value is 0.
9.1.1.3 DD parameter
This parameter is used to define the delay between the time that alarm input is trigged and the time
that alarm is reported.

SOLO-IDEA
INSTALLATION MANUAL
Page 9
9.1.1.4 Table of parameters
Name
Comment
IN1
Mode of operation for input 1
IN2
Mode of operation for input 2
ID1
Input time integration delay on input 1
ID2
Input time integration delay on input 2
DD1
Time delay for alarm reporting on input 1
DD2
Time delay for alarm reporting on input 2
Table 1: IN, ID and DD parameters
Example:
Direct programming on the SIM card
SOLO-IDEA PROGRAMMING TABLE
Name
Number
Description
IN1
0
Alarm activated by connecting to GND
IN2
4
Alarm activated by connecting to GND + RST SMS
ID1
10
Input 1 has to be valid for 10 second to trigger the alarm
ID2
0
Input 2 has to be valid for 0,5 second to trigger the alarm
DD1
0
Reporting of the alarm on input 1 is delayed by 0s
DD2
15
Reporting of the alarm on input 1 is delayed by 15s
Table 2: IN, ID, DD parameters example
Remote programming by SMS
;IN1=0;IN2=4;ID1=10;ID2=0;DD1=0;DD2=15;
9.1.2 REMOTE REPORTING ALARM EVENTS
Parameters used to define the way to report the alarm event.
NOTE
SOLO-IDEA device send SMS messages for reporting alarm events.
9.1.2.1 TN parameter
Telephone numbers for remote alarm reporting are listed as TN parameters. Remote alarm reporting
on SOLO-IDEA is done via SMS messages.
9.1.2.2 LN parameter
This parameter is used to link alarm event from inputs or any other source to the telephone numbers
from TN list.

SOLO-IDEA
INSTALLATION MANUAL
Page 10
9.1.2.3 LOT parameter
LOT parameter is used to define the time control for voice calls. The start of voice connection starts
the LOT timer. If the voice connection is still ON when the LOT timer expires SOLO-IDEA
disconnects voice connection.
9.1.2.4 Table of parameters
Name
Comment
TN1
1st telephone number
TN2
2nd telephone number
TN3
3rd telephone number
TN4
4th telephone number
TN5
5th telephone number
LN1
Input & telephone No. linking for 1st alarm input (TN1 –TN5)
LN2
Input & telephone No. linking for 2nd alarm input (TN1 –TN5)
LN3
Input & telephone No. linking for 3nd alarm input (TN1 –TN5)
LN4
Input & telephone No. linking for 3nd alarm input (TN1 –TN5)
LN5
Periodic test SMS. No. linking (TN1 –TN5)
LN6
SIM card refill. No. linking (TN1 –TN5)
LN7
NAC list. No. linking (TN1 –TN5) (see note)
LN8
Log status. No. linking (TN1 –TN5)
LOT
Time out for GSM connection.
Table 3: Remote alarm reporting parameters
NOTE
When telephone number (calling or messaging SOLO-IDEA) is not on the CLIP list,
not acknowledge event occurs (NAC). The telephone number responsible for this event
can be send to TN user for notification.
Example:
Direct programming on the SIM card
SOLO-IDEA PROGRAMMING TABLE
Name
Number
Description
TN1
042376678
1st telephone number
LN1
13
Input 1 reports alarm to TN1 & TN3
LN2
1234
Input 2 reports alarm to TN1 & TN2 & TN3 & TN4
LN7
1
NAC event sent to TN1
LOT
60
Voice connection stay valid for max of 60s, after this time
Voice connection breaks
Table 4: Remote alarm reporting example
Remote programming by SMS
;TN1=042376678;LN1=13;LN2=1234;LN7=1;LOT=60;