Marshall Amplification WK-MW15 User manual

Outdoor Electric
Mosquito Killer
WK-MW15
User guidance manual
Please read the manual carefully before using
the product and keep it for future reference.

•Please check the compatibility between the voltage of
the product equipment and the product before using.
•It is strictly prohibited to disassemble this product
•Do not put the product into or near the source of fire to avoid
the risk of damage
•When using mosquito killer, turn off other lights or reduce the
light in the mosquito area, avoid other light source interference (such as
fluorescent lamps, TV, light outside the window, etc.), avoid direct wind
(such as fans, air conditioning, etc.) to the product. It is more effective in
an enclosed space in the absence of disturbances;
•Do not stare at any lightbulb when in use and do not touch
the bulb when in the on position;
•When in use, the mosquito device should be placed in a
place out of reach of children. It is forbidden to put your fingers or
metals objects inside the machine to avoid accidents.

If the power line or fan is damaged, please hand it over to a specialist for
repair or replacement in order to avoid danger.
•If the product is placed in the outdoor courtyard for use,
please pay attention to rain protection, waterproof, lightning protection
measures, so as not to damage the product.
•Do not use where flammable vapors and explosive dust may exist.
•When using an extended wire, keep the power output
socket away from moisture and avoid damaging the wire.
Danger: High Voltage
Warning:There is a high voltage power grid inside the product.
It is strictly prohibited to flush the mosquito killer with water

1. Connection to the power source:
Please note that the product voltage is compatible with the household voltage
before using the product.
2. Initial use
Plug in the power and the product will start working. The light tube of the
mosquito trap will light up and the high pressure will start working. Then turn
off the power and unplug the power.
3. Anti-mosquito principle:
This product uses a mosquito trap light tube, which produces the wavelength
of light wave that is most attractive to mosquitoes. To lure mosquitoes to get
close to the light source, and then kill them by electric shock after passing
through the high-voltage power grid.
4. Remove the mosquito box and remove the mosquitoes:
Drawer type mosquito storage box, gently pull the bottom, you can easily clean
mosquitoes and other insects from the tray
5. Replace the tube:
Take out the mosquito box, take out the bottom support screw, pull out the
lamp tube for replacement, and then install the new bulb

1. In order to achieve the best effect of mosquito catching, please keep
working continuously for more than 12 hours when using the
unit

Qsuspended ring Upper
cover
HV mesh
External mesh
Lamp tube
Mosquito tray

EPA Est Number: 094740-chn-001
Product name: outdoor electric
shock
W-MW15 Mosquito Zapper
Model No.:WK-MW15
Rated voltage/
frequency:120V~60Hz
Rated Power:18W
Output voltage:4000V
Product
Dimension:208*208*310mm
Package
Dimension:234*234*343mm