Marshall Amplification CV620-IP User manual

CV620-IP / CV620-IPW
Full HD PTZ Conference IP Camera
User Manual

CV620-IP / CV620-IPW
2User Manual v.1
Table of Contents
Chapter 1. Safety Instructions........................................................................................3
Chapter 2. Package Contents .........................................................................................5
Chapter 3. Product Overview..........................................................................................6
3.1 Overview........................................................................................................................................6
3.2 Description of LED indicator..........................................................................................................6
Chapter 4. Instruction for installation............................................................................7
4.1 Preparation before installation.......................................................................................................7
4.2 Instruction for installation...............................................................................................................7
4.3 Connecting devices .....................................................................................................................14
Chapter 5. Remote Control and Setting Menu ............................................................18
5.1 Functions of remote control.........................................................................................................18
5.2 Setting Menu................................................................................................................................19
Chapter 6. Descriptions of Major Functions ...............................................................25
6.1 I would like to switch to CV620-IPW............................................................................................25
6.2 I would like to save the current lens position data ......................................................................25
6.3 I would like to clear the saved position data ...............................................................................25
6.4 I would like to turn on the back light compensation function ......................................................25
6.5 I would like to adjust the shooting angle of the lens ...................................................................25
6.6 I would like to zoom in/out images ..............................................................................................25
6.7 I would like to adjust the focal length ..........................................................................................25
6.8 I would like to adjust the AF speed..............................................................................................25
6.9 I would like to set the image mode..............................................................................................26
6.10 I would like to freeze images.......................................................................................................26
6.11 I would like to rotate the image....................................................................................................26
6.12 I would like to change the camera direction................................................................................26
6.13 I would like to display the current status .....................................................................................26
6.14 I would like to reset to the default value......................................................................................26
Chapter 7. Network Function Settings Description....................................................27
7.1 Web System Requirements.........................................................................................................27
7.2 Online IP Camera........................................................................................................................27
7.3 Web Page Function Description..................................................................................................29
Chapter 8. DIP switch setting .......................................................................................36
8.1 DIP SWITCH................................................................................................................................36
8.2 RS-422 Connection .....................................................................................................................37
Chapter 9. Troubleshooting..........................................................................................39

CV620-IP / CV620-IPW
3User Manual v.1
Chapter 1. Safety Instructions
Please use the product following the safety instructions below:
1 Operation
1.1 Please use the product in the recommended operating environment.
1.2 Do not place Light Engine in tilted position.
1.3 Do not place the product on an unstable trolley, stand or table.
1.4 Do not use this product near water or source of heat.
1.5 Use attachments only as recommended.
1.6 Use the type of power source indicated on the HD Camera. If you are not sure of the type of power
available, consult your dealer or local electricity company for advice.
1.7 Always take the following precautions when handling the plug. Failure to do so may result in sparks or fire.
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
1.8 Do not overload wall sockets, extension cords or multi-way plug boards to avoid potential risks.
1.9 Do not block slots and openings in the case of this product as poor ventilation may lead to overheating of
this product.
1.10Except as specifically instructed in this User Manual, do not attempt to open or remove covers by yourself.
It may expose you to electric shock or other hazards. Refer all servicing to licensed service personnel.
1.11Unplug this product from the wall outlet and refer servicing to licensed service personnel when the
following situations happen:
If the power cords are damaged or frayed.
If liquid is spilled into the HD Camera or the HD Camera has been exposed to rain or water.
2 Installation
2.1 For security considerations, please make sure the standard hanging rack you bought is in line with UL or
CE safety approbations and installed by technician personnel approved by agents.
3 Storage
3.1 Do not place the HD Camera where the cord can be stepped on as this may result in fraying or damage to
the lead or the plug.
3.2 Never push objects of any kind through cabinet slots. Never allow liquid of any kind to spill into the HD
Camera.
3.3 Unplug this product during thunderstorms or if it is not going to be used for an extended period.
3.4 Do not place this product or accessories on top of vibrating equipment or heated objects.
4 Cleaning
4.1 Unplug all the cables before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol
cleaners.
5 Remote control (if the accessories are equipped with remote control)
5.1 Using an incorrect battery type in the remote control may result in breakdown. Follow local instructions on
how to dispose of used batteries.
Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
If HD Camera will not be used for an extended time, unplug it from the power socket.

CV620-IP / CV620-IPW
4User Manual v.1
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-
serviceable parts inside. Refer servicing to licensed service personnel.
This symbol indicates that
this equipment may contain
dangerous voltage which
could cause electric shock.
This symbol indicates that
there are important
operating and maintenance
instructions in this User
Manual with this unit.
FCC Warning
This HD Camera has been tested and found to comply with the limits for a Class A digital device, pursuant to
Article 15-J of FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a commercial installation.
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus as set
out in the interference-causing equipment standard entitled "Digital Apparatus," ICES-003 of Industry Canada.
Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de
Classe A prescrites dans la norme sur le material brouilleur: "Appareils Numeriques," NMB-003 edictee par
l'Industrie.
EN55032 (CE Radiation) Warning
Operation of this equipment in a residential environment could cause radio interference.
Note
Risk of Electric Shock
Please do not open it by yourself.

CV620-IP / CV620-IPW
5User Manual v.1
Chapter 2. Package Contents
CV620-IPW Instruction for installation Remote Control

Power Cord Power Adapter RS-422 Connector
Appearance may vary depending
on country/region
Metal Plate A Metal Plate B M3 Screws

CV620-IP / CV620-IPW
6User Manual v.1
Chapter 3. Product Overview
3.1 Overview
1. Camera lens
2. Power LED indicator
3. Standby LED indicator
4. Audio In
5. USB port (for FW update)
6. Power input
7. Network port (supported for PoE)
8. HDMI Output
9. 3G-SDI
10.OUTPUT Switch
11.IR SELECT
12.RS-232 output
13.RS-232 input
14.RS-422 Connection
15.Camera Address Selectors
16.SYSTEM Switch
3.2 Description of LED indicator
Status
Power
Standby
Startup in progress Green light Orange light
In use
Green light
No indicator
In standby mode No indicator Orange light
Signal from the remote
control is received
Green light flickers; it
flickers every 0.5 second
No indicator
Front View
Back View
Bottom

CV620-IP / CV620-IPW
7User Manual v.1
Chapter 4. Instruction for installation
4.1 Preparation before installation
Installation and connection of CV620-IPW HD camera requires special skills. To install by yourself,
please follow necessary steps, ensure steady and tight installation of the device, and pay attention to
your safety to avoid any accident.
4.1.1 Ensure the safety of the installation environment. Please do not install the device on
unstable ceiling or in a place where the device is in danger of falling to avoid any
accident.
4.1.2 Please check whether accessories in the box are complete or not. Please contact the
supplier for any shortage, and make sure to keep the accessories in the box intact.
4.1.3 Please choose a proper place for installation of CV620-IPW in advance. Please
determine an installation place according to the following requirements
4.1.1.1Confirm the position for the object to be captured.
4.1.1.2Confirm whether the CV620-IPW is set at a proper distance from other light sources.
4.2 Instruction for installation
4.2.1 I would like to install CV620-IPW on the desk
4.2.1.1 Precautions for installation
Please install the machine on a flat desk
Do not grab the camera head by hand when handling the device
Do not rotate the camera head by hand. Improper rotation may result in breakdown of the camera
4.2.1.2 Installation steps
1. Please adjust DIP switch at first prior to installation
Note: Please refer to Chapter 8 DIP Switch Setting for the relevant descriptions on DIP
switch.
2. Place the camera on a flat desk directly to ensure the normal vertical and horizontal operation of
the machine

CV620-IP / CV620-IPW
8User Manual v.1
4.2.2 I would like to install CV620-IPW on the ceiling
4.2.2.1 Prepare for the parts and equipment required during the installation
1. Accessories of CV620-IPW in the box (metal plates A,B, M3 screw silver x 8, black x 2)
2. Screw for locking on ceiling mounted hanger x 4
3. Drilling machine, screw driver, ladder
4.2.2.2 Camera Size
Length x Width x Height: 174 x 186.2 x 185.5 mm
Weight: 1.8 Kg
4.2.2.3 Max. rotation dimension of camera

CV620-IP / CV620-IPW
9User Manual v.1
4.2.2.4 Size Diagram
1. Metal plate B - ceiling side
Metal plate B locking
screw
Metal plate B locking
bolt
Metal plate B - ceiling side
M3 threaded hole
M3 threaded hole
M3 threaded hole

CV620-IP / CV620-IPW
10 User Manual v.1
2. Metal plate A - machine side
Metal plate A - machine side
Metal plate A locking screw

CV620-IP / CV620-IPW
11 User Manual v.1
3. Bottom of machine
4.2.2.5 Precautions for installation
1. Before installation, please confirm the orientation of the machine relative to the object to be
captured
2. It is recommended that the machine should be set at a distance of more than 1 meter away from
the object to be captured. Please adjust for a best distance according to the magnification of the
lens
3. The machine (including metal plates) is weighed at about 2.5 kg. If it is to be installed on the
ceiling, please use the hanger that has obtained UL security approval to prevent the machine
from falling.
1 meter
↑

CV620-IP / CV620-IPW
12 User Manual v.1
4. Please check whether the camera is installed securely on a regular basis
4.2.2.6 Installation steps
1. Please adjust resolution on DIP switch at first
Note: Please refer to Chapter 8. DIP Switch Setting for the relevant descriptions on DIP
switch.
2. Fix the metal plate A on the machine base with 4 M3 silver screws
3. Lock the metal plate B on ceiling mounted hanger
※Caution:
(1) Please use the hanger that has obtained UL security approval
(2) Please reserve the hole for the connecting wires of the camera
4. Combine the metal plateA and the metal plate B
(1) Push the metal plate A up to the ceiling and then to the right to latch the metal plate B
(2) And then secure with 2 M3 silver screws and 1 M3 black screw

CV620-IP / CV620-IPW
13 User Manual v.1
black
screw

CV620-IP / CV620-IPW
14 User Manual v.1
4.2.2.7 How to remove
1. Remove the connecting wires from the camera
2. Uninstall the camera together with the ceiling, loosen the three screws that fix the metal plates A
and B and push to the left to remove the machine
3. Then remove the screws on the hanger and the machine
4.3 Connecting devices
4.3.1 Image Output
4.3.1.1 Connecting to PC (video conference)
<Remark 1> SDI supports the audio output of 48 KHz only.
4.3.1.2 Connecting to an HDTV/computer monitor (HDMI)
HDMI Cable
or
SDI Cable
MTU

CV620-IP / CV620-IPW
15 User Manual v.1
4.3.1.3 Connecting to Internet
Note: CV620-IPW can be used with browsers, VLC and QuickTime after it is
connected to the Internet.
Router or Hub
Network cable
HDMI cable
Monitor or HDTV

CV620-IP / CV620-IPW
16 User Manual v.1
4.3.1.4 Connecting AUDIO IN
Note: Set the [Audio In] in the OSD to reflect the input device
4.3.2 Controlling VCs with the computer
4.3.2.1 Connecting to one computer for connection between VCs (RS-232 in/out)
Note: With RS-232 in/out, at most 7 VCs can be connected.
4.3.2.2 Connecting to one computer for connection between VCs (RS-422)
Note: Please refer to 8.2 RS-422 connection for the RS-422 connection instructions.
MIC or audio mixer
Audio

CV620-IP / CV620-IPW
17 User Manual v.1
Note: With RS-422, at most 7 VCs can be connected.
4.3.3 Use of CV620-IPW with Internet Connection
4.3.3.1 Setup before use
Connecting the screen through HDMI output.
Press [MENU] on the Remote Control to display the OSD menu.
Shift down to [Ethernet] to modify and confirm the IP address
DHCP: Enable/disable the dynamic host configuration protocol
IP Address: Confirm or modify the IP address of CV620-IPW
Subnet mask: 255.255.255.0
Gateway: Preset 192.168.100.254
[Remark] Please modify the above settings based on the LAN setting of the operating environment. To use
DHCP, please connect the CV620-IPW to LAN and then confirm IP address.
After completing settings, press [MENU] to exit the OSD menu.
After completing setting and confirming IP address, HDMI cable can be disconnected.
4.3.3.2 Start Using
Connect network cable to CV620-IPW network port to connect CV620-IPW to LAN.
Press [MENU] on the Remote Control to display the OSD menu.
Open the browser, and enter the URL of CV620-IPW in the address bar,
e.g.: http://192.168.100.150 (default IP address)
Enter administrator’s account and password
Account: admin (Default)
Password: 9999 (Default)
Subnet mask: 255.255.255.0
Gateway: Preset 192.168.100.254
[Remark 1] For details, please refer to Chapter 7 Network Function Settings Description.
[Remark 2] In addition to browsers, other software such as VLC and QuickTime can be used for operation.

CV620-IP / CV620-IPW
18 User Manual v.1
Chapter 5. Remote Control and Setting Menu
5.1 Functions of remote control
Note: The below functions are listed alphabetically.
Item Description

,

,

,

Move the lens
Back Light Turn on/off back light compensation
Camera
select
Choose 1 ~ 3 of CV620-IPW
Focus-
Manual /
Far/Near
Turn on manual focus to adjust the focal
length
Focus-Auto Auto focus
Freeze Freeze the screen
Home-Enter Go back to the main page / Execute
Info Status information
L/R
Direction Set
L/R Direction / Normal
Menu Display OSD menu
Mirror Rotate the image (OFF / Mirror / Flip /
Rotate)
Pan/Tilt
Reset
Clear the Pan / Tilt setting
Picture Switch image effect (OFF / NEG / Black &
White)
Power Power Switch
Preset Appoint an ID (0 ~ 9) to save the current
position data
Reset Appoint an ID (0 ~ 9) to delete the current
position data
Zoom-Fast Adjust image size
Zoom-Slow Fine-tune image size

CV620-IP / CV620-IPW
19 User Manual v.1
5.2 Setting Menu
Note: Press [Menu] on the remote control to enter the setting menu; the bold underlined values in the following
table are defaults.
1st Level
Major Items 2nd Level Minor Items 3rd Level Adjustment
Values
Function Descriptions
Exposure
Mode
1. Full Auto
2. Shutter Pri
3. Iris Pri
4. Manual
5. White Board
6. Smooth Auto
Exposure mode setting
Exposure
Comp.
On / Off AE Level
Exposure
Comp. Level
-6~0~5 The value can be adjusted only after
Exposure Comp. is activated
Shutter Pri
60/30
mode
50/25
mode
Shutter priority setting
1/10000
1/10000
1/5000
1/5000
1/3000
1/3000
1/2500
1/2500
1/2000
1/1750
1/1500
1/1250
1/1000
1/1000
1/725
1/600
1/500
1/425
1/350
1/300
1/250
1/215
1/180
1/150
1/120
1/120
1/100
1/100
1/90
1/75
1/60
1/50
1/30
1/25
1/15
1/12
1/8
1/6
1/4
1/3
1/2
1/2
1/1
1/1

CV620-IP / CV620-IPW
20 User Manual v.1
Iris Pri
1. F1.6
2. F2
3. F2.2
4. F2.7
5. F3.2
6. F3.8
7. F4.5
8. F5.4
9. F6.3
10. F7.8
11. F9
12. F11
13. F13
14. F16
15. F18
Iris setting
Manual Gain
1. 0dB
2. 2 dB
3. 4 dB
4. 6 dB
5. 8 dB
6. 10 dB
7. 12 dB
8. 14 dB
9. 16 dB
10. 18 dB
11. 20 dB
12. 22dB
13. 24dB
14. 26 dB
15. 28 dB
16. 30 dB
Manually set the gain
Manual Speed
60/30
mode
50/25
mode
Manually set the shutter
1/10000
1/10000
1/5000
1/5000
1/3000
1/3000
1/2500
1/2500
1/2000
1/1750
1/1500
1/1250
1/1000
1/1000
1/725
1/600
1/500
1/425
1/350
1/300
1/250
1/215
1/180
1/150
1/120
1/120
1/100
1/100
1/90
1/75
1/60
1/50
1/30
1/25
1/15
1/12