Martha Stewart PLAYA User manual

ASSEMBLY INSTRUCTIONS
Description QTY
Item
Description: PLAYA COUNTER STOOL
Pre-assembly:
Remove all parts and hardware from box along with any plastic protective packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small parts or
hardware.
Important safety instructions:
Please carefully read all instructions before assembling.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
P1 1
REST & REMOVABLE SEAT
& REMOVABLE CUSHION
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES
RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Item
H1
H2
H3
H4
Description
Lock Washer Ø6 x Ø11 x 2mm
Flat Washer Ø6 x Ø16 x 1mm
QTY
8
8
Page 1 of 4
Allen Wrench 4 mm 1
Bolts M6 X 50 mm 4
H5
H6 Screw JP 8 x 1 3/4" 8
Bolts M6 X 60 mm 4
P2
P3
P4
P5
P6
P7
P8
FRONT LEG RIGHT
FRONT LEG LEFT
BACK LEG RIGHT
BACK LEG LEFT
FRONT STRETCHER
BACK STRETCHER
RIGHT STRETCHER
P9 LEFT STRETCHER
Hardware List
Parts List
1
1
1
1
1
1
1
1
H7 Screw Driver ( Not Include )

ASSEMBLY INSTRUCTIONS
Description: PLAYA COUNTER STOOL
Page 2 of 4
Assembly Procedures:
Step1.
1) Assemble the Blake Accent Chair on a flat, soft surface such as a carpet or cloth to prevent scratching
the finishing.
2) Attach Front legs Right (P2), Attach Front Leg Left (P3) to Chair top (P1) using Allen key (H5), Lock washer (H3), Flat
washers (H4), and 50 MM Bolt (H1) and Attach Back Leg Right (P4), Attach Back Leg Left (P5) to Chair top (P1) using
Allen key (H5), Lock washer (H3), Flat washers (H4), and 60 MM Bolt (H2). ( Don't tighten all bolts on this step ).
(H1)x4
(H2)x4
(H3)x8
(H4)x8 Flat Washer Ø6 x Ø16 x 1mm
Bolts M6 X 50 mm
Bolts M6 X 60 mm
Lock Washer Ø6 x Ø11 x 2mm
(H5)x1 Allen Wrench 4 mm
P1
P4 P5
P3
P2
H2
H4
H5
H3
H5
H1
H3
H4
P7
P8
P2
P6
P3
P9
P5
P1
P4

ASSEMBLY INSTRUCTIONS
Description: PLAYA COUNTER STOOL
Page 3 of 4
Step 2: Attach Front Stretcher (P6) to Front Leg Right (P2), Front Leg Left (P3) using Screw Driver (H7), Screw JP 8 x 1 3/4" (H6)
and Attach Back Stretcher (P7) to Back Leg Right (P4), Back Leg Left (P5) using Screw Driver (H7), Screw JP 8 x 1 3/4" (H6)
Step 3: Attach Right Stretcher (P8) to Front Leg Right (P2), Back Leg Right (P4) using Screw Driver (H7), Screw JP 8 x 1 3/4" (H6)
and Attach Left Stretcher (P9) to Front Leg Left (P3), Back Leg Left (P5) using Screw Driver (H7), Screw JP 8 x 1 3/4" (H6).
(H6)x4 Screw JP 8 x 1 3/4"
(H7) Screw Driver ( Not Include )
P8
P4
P3
P9
P2
P5
H7
H6
H7 H6
H7 H6
H7
H6
P4
P5
P3
P2
P6
P7
( Then tighten all bolts on this step ).
(H6)x4 Screw JP 8 x 1 3/4"
(H7) Screw Driver ( Not Include )

ASSEMBLY INSTRUCTIONS
Description: PLAYA COUNTER STOOL
Page 4 of 4
Step 4. Turn the assembled chair to an upright position. Assembly is complete.
Thank you for your purchase
Disclaimer: When properly assembled, this item is safe for intended use. Seller is not liable
for any damages resulting from item being improperly assembled after purchase.
ADDITIONAL NOTE ABOUT SAFETY: BOLTS MAY LOOSEN DURING NORMAL EVERYDAY USE. THEY SHOULD BE
INSPECTED AT LEAST EVERY 3 MONTHS AND RE-TIGHTENED AS NEEDED TO PREVENT DAMAGE OR INJURY, AND
ENSURE STABILITY.
Leveler
Note: Levelers on the front legs