
www.massfidelity.com 7
POWER SAVING
By default, when the power adapter is connected and the
Core turned on, it is in the always-on state.
AUTO STANDBY MODE
5PTBWFQPXFSZPVDBOFOBCMFUIF"VUP4UBOECZNPEFCZ
pressing the POWER key for 10 seconds (until the LED
indicator flashes green).To reverse this action, press the power
key for 10 seconds again until the LED indicator flashes red.
In "VUP4UBOECZNPEFXIFOUIFpower adapter is connected
and the Core receives no audio signal for 30 minutes, from
any input (Bluetooth, Optical, or Aux), it automatically enters
UIFMPXQPXFSTUBOECZNPEF5PXBLFUIFVOJUQSFTTUIF
POWER key .
8IFOUIF$PSFJTJOUIF4UBOECZ.PEFUIF*3SFNPUFDPOUSPM
DBOCFVTFEUPXBLFUIFVOJU
If the Core is running on CBUUFSZQPXFS and has no audio
signal from any input (Bluetooth, Optical, or Aux) for 10
NJOVUFTJUUVSOTPGGUPTBWFCBUUFSZQPXFSSFHBSEMFTTPGXIFUIFS
UIFQPXFSTBWJOHGFBUVSFJTFOBCMFEPSEJTBCMFE5PUVSOUIF
$PSFCBDLPOQSFTTUIFPOWER key .
8IFOUIF$PSFJTDPNQMFUFMZPGGJFQPXFSDBCMFVOQMVHHFE
the IR remote control cannot control the unit since the Core is
not “on”.
LED INDICATORS
The LED Indicator on the top of the Core indicates the
operating mode.
LED Indication Mode
Red Power adapter connected,
4UBOECZNPEF
LED