MASSEY FERGUSON 2140 - User manual

New model to•
complete the line up
ofvekeybalesizes
Balesize0.8mwide•
x0.7mtall
Lengthupto2.7m•
Pick-up2.26m•
workingwidth
Choiceofsingleor•
tandemaxles
Choiceofstandard•
packerorrotor
cutterconguration
ISOBUS11783•
Compatible
implement
Newmodel:Largesquarebaler
MF
VISION INNOVATION LEADERSHIP QUALITY RELIABILITY SUPPORT PRIDE COMMITMENT
2140

Every effort has been made to ensure that the information contained in this publication is as accurate and current as possible. However, inaccuracies, errors or omissions may occur and details of the specications may be changed at any time without notice. Therefore, all specications should be conrmed with your Massey Ferguson Dealer or Distributor prior to any purchase.
Specications
Balesize MF2140
Cross section (width x height) mm 800x700
Length (maximum) mm Up to 2740
DimensionsandWeights
Overall width - single / tandem axle mm 2550 / 2590
Overall length - bale chute folded for transport mm 8300
Overall height – to top of hand rail mm 3270
Weight (single axle / tandem axle, less cutter) kg 6090 / 7170
Weight (single axle / tandem axle, with cutter) kg 6920 / 8000
MainDrive
Protection Slip and overrun clutches, shearbolt
Gearbox type Enclosed, double reduction
Plunger
Speed strokes/min 47
Length of stroke mm 740
Pickup
Effective working width mm 2260
Protection Slip and overrun clutches
Suspension Torsion bar system
FeedingSystem
Packers Fork type, 4 hardened tines
Protection Splined slip clutch
TyingMechanism
Number / type of knotters 4 Double knot
Twine type / capacity High quality polypropolene / 30 ball
storage
Knotter Blower Standard - hydraulically driven
Differential Mechanical
Tyres
Single axle 600 / 50 - 22.5
Tandem axle 500 / 50 - 17
Lights
CE compliant road lighting, with three work lights
& three service lights
ControlandMonitoringSystem
ISOBUS 11783 Compatible, GTA 1 full colour console
TractorRequirements
Recommended PTO horsepower - Packer hp / kW 140 / 105
Recommended PTO horsepower - Cutter hp / kW 170 / 127
PTO operating speed rev/min 1000
PTO type Type II 1 3/8” (35 mm) - 21 Spline CV PTO Shaft
Hydraulics spool valve requirements 2 or 3 double acting auxiliary valves
Standard Equipment Two rail bale ejector, knotter blower, autolube, heavy duty roller
bale chute
Optional Equipment
Cutter unit, Tandem axle, Air brakes
Type III 1 3/4” (44 mm) 20 Spline CV PTO Shaft
Integrated Bale Weighing System - available 2011 season
l = Standard m= Optional
is a worldwide brand of AGCO
© AGCO Limited. 2010 | A- English/15041/0510/500