Master equipment SuperDry TP2401 User manual

A B C D
E
F
H
A.Top Pole (1)
B. Bottom Pole (1)
C. Base With Wheels/Brakes (1)
D. Base With Wheels/Brakes (1)
E. Small Round Washer (1)
F. Large Round Washer (1)
G.Twist Bolt (1)
H. Dryer Body (1)
Parts List:
1. Connect the base of the dryer stand by attaching the two bases with
wheels and brakes together in an "X" shape. Attach the bottom pole (B)
to the "X" base using the twist bolt (G), and washers (E &F).
Tighten as needed.
3. Slide the bottom of the dryer body (H) into the top pole (A). Secure the dryer
body and top pole together by tightening the knob on the top pole.
2. Slide the top pole (A) into the bottom pole (B).
Secure using the tightening knob on the bottom
pole (B).
G
TP2401 SuperDry Stand Dryer Assembly Instructions

1
2
3
4
5
6
7
8
1.Wind Out-Let
2.Heating Control Knob
3.Pilot Light
4.On/Off Power Switch
5.Air Speed Control Knob
6.Air Intake
7.Brakes
Unlocked
Locked
OPERATING INSTRUCTIONS:
1. Use this dryer with 110/120 volt electrical systems. Do not exceed the capacity of the circuit the dryer is being
used on.
2. Turn the dryer on by activating the on/off power switch.
3. Select the heat setting: I (low), II (high), or neutral (warm air)
4. Turn the air speed control knob to set the desired airflow.
5. When operating the dryer, take care not to blow air directly into pet's eyes, ears, or other sensitive areas or body
orifices.
6. Do not leave pet unattended while using this or any dryer.
7. Before shutting dryer off, turn the air speed control knob to the lowest setting.This will extend the life of the
machine by reducing stress on the motor during startup.
8. Do not insert any pins or metal objects into the workings of the machine.This can result in electric shock or
cause the machine to short-circuit.
9. Do not block or obstruct the filter or diffuser. Clean the air intake regularly and keep it unblocked. Do not allo
water to be drawn into the air intake.
10. Take care to protect the dryer housing from shock or sudden impact.
CARE INSTRUCTIONS:
1. Please clean the sponge filters on a regular basis by washing them or blowing air through them. Be sure to let
the filters dry before reinstalling.
2. Keep the surface of the dryer clean and dry. Use a dry and soft cloth to clean the surface.
3. For stubborn stains and dirt, moisten the cloth with a mild detergent.
Do not use harsh chemicals or cleaning agents.
SAFETY INSTRUCTIONS:
To reduce the risk of fire, electric shock or injury to persons when using your
appliance, please follow the basic safety precautions.
1. READ all instructions before using this appliance.
2. Use this dryer only for its intended purpose for drying dogs and cats.
3. Never unplug the dryer by pulling on the power cord. Always grasp the
plug firmly and pull straight from the outlet.
4. To protect against electrical hazards, do not immerse the dryer in water
or any liquid or allow water to be drawn into the air intake.
5. Do not operate the dryer in the presence of explosive fumes.
6. Closely supervise children when dryer is in use.
7. Unplug the dryer before cleaning, before making any repairs, or when
dryer is not in use.
8. This dryer should be connected to a grounder power outlet with the
proper electrical supply. See operating instructions.
9. Repair or replace any loose or worn parts immediately.
10. Do not operate the dryer when parts are missing or broken.
11. Do not use the dryer outdoors.
12. Do not operate the dryer if it is damaged or malfunctioning in
anyway. Contact PetEdge Customer Service at 800-638-5754.
13. Avoid contacting hot surfaces.
14. Do not wrap cord around motor enclosure. Continuous heat from the
motor may damage cord insulation and cause electric shock.
LIMITED WARRANTY
TP2401 Master Equipment SuperDry Stand Dryer
______________________________:ed:sahcruPetaD
Manufactured for / Fabricado para / Fabriqué pour
©Tops Pet Products, Beverly, MA 01915
Made in / Hecho en / Fabriqué à China
This Master Equipment™ product is warranted against defective material or workmanship for three years from the date of original purchase. Any Master Equipment™ product that is
determined to be defective in material or workmanship during the warranty period will be repaired or replaced without cost to the consumer for parts or labor. Please contact PetEdge
Customer Service at 1-800-638-5754 regarding any defective product. PetEdge will not be liable under this warranty for any defect, failure, or malfunction of this product caused by
normal wear, abuse, misuse, unauthorized adjustments, or repairs. PetEdge will not be liable for any incidental or consequential damages of any type. Any implied warranty is limited
to the one-year period provided in this express warranty.
Some states do not allow limitations on how long an implied warranty lasts or exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may
not apply to you. Warranty is void if product has been modified in any manner, repaired by anyone other than PetEdge or has been subject to unreasonable use. Warranty is valid in
the United States.