MasterCraft 054-8151-4 User manual

INSTRUCTION MANUAL
20V max* LITHIUM-ION
CORDLESS RECIPROCATING
SAW
054-8151-4

2
20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
TABLE OF CONTENTS
TECHNICAL SPECIFICATIONS 3
SAFETY GUIDELINES 4
DESCRIPTION 9
OPERATING INSTRUCTIONS 10
MAINTENANCE 17
TROUBLESHOOTING 18
PARTS LIST 19
WARRANTY 21
If any parts are
missing or damaged,
or if you have any
questions, please call
our toll-free helpline
at 1-800-689-9928.
Read and understand this instruction manual
thoroughly before using the product. It contains
important information for your safety as well as
operating and maintenance advice.
Keep this instruction manual for future use. Should
this product be passed on to a third party, then this
instruction manual must be included.

3 4
20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
SAFETY GUIDELINES
TECHNICAL SPECIFICATIONS
MOTOR 20V DC
NO-LOAD SPEED 0–2800 SPM
BLADE STROKE 7/8” (22 mm)
WEIGHT (WITHOUT BATTERY) 4 lb 2 oz (1.86 kg)
WARNING!
Safety symbols in this Instruction Manual are used to flag possible dangers. The safety
symbols and their explanations require your full understanding. The safety warnings do not,
by themselves, eliminate any danger, nor are they substitutes for proper accident prevention
measures.
WARNING!
This Safety Alert Symbol indicates caution, warning, or danger. Failure to obey a safety
warning can result in serious injury to yourself or others. To reduce the risk of injury, fire, or
electric shock, always follow the safety precautions.
Know your tool
To operate this tool, carefully read this Instruction Manual and all labels affixed to the Cordless
Reciprocating Saw before using it. Keep this Instruction Manual available for future reference.
Important
This tool should only be serviced by a qualified service technician. For more information, call the toll-free
helpline at 1-800-689-9928.
READ ALL INSTRUCTIONS THOROUGHLY.
SAVE THESE INSTRUCTIONS.
Safety guidelines for cordless power tools
WARNING!
Read all safety warnings and instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury. Save all warnings and instructions for future
reference. The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
Work area safety
• Keeptheworkareacleanandwelllit. Cluttered or dark areas invite accidents.
• Donotoperatepowertoolsinexplosiveatmospheres,suchasinthepresenceofammable
liquids,gasesordust.Power tools create sparks, which may ignite the dust or fumes.
• Keepchildrenandbystandersawaywhileoperatingapowertool. Distractions can cause you to
lose control.
*Maximum battery voltage without workload; with workload nominal voltage is 18V.

5 6
20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
SAFETY GUIDELINES SAFETY GUIDELINES
Electrical safety
• Powertoolplugsmustmatchtheoutlet.Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will reduce risk of
electric shock.
• Avoidbodycontactwithearthedorgroundedsurfaces,suchaspipes,radiators,rangesand
refrigerators.There is an increased risk of electric shock if your body is earthed or grounded.
• Donotexposepowertoolstorainorwetconditions. Water entering a power tool will increase the
risk of electric shock.
• Donotabusethecord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of
electric shock.
• Whenoperatingapowertooloutdoors,useanextensioncordsuitableforoutdooruse. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
• Ifoperatingapowertoolinadamplocationisunavoidable,useaground-faultcircuitinterrupter
(GFCI)protectedsupply. Use of a GFCI reduces the risk of electric shock.
Personal safety
• Stayalert,watchwhatyouaredoingandusecommonsensewhenoperatingapowertool.Do not
use tool while tired or under the inuence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Usepersonalprotectiveequipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection, used for appropriate conditions, will reduce
personal injuries.
• Preventunintentionalstarting.Ensure that the switch is in the off-position before connecting to a
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your nger
on the switch or plugging in power tools that have the switch on invites accidents.
• Removeanyadjustingkeyorwrenchbeforeturningthepowertoolon. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
• Donotoverreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
• Dressproperly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• Ifdevicesareprovidedfortheconnectionofdustextractionandcollectionfacilities,ensurethat
theseareconnectedandproperlyused.Use of these devices can reduce dust-related hazards.
Power tool use and care
• Donotforcethepowertool.Use the correct power tool for your application. The correct power tool will
do the job better and more safely at the rate for which it was designed.
• Donotusethepowertooliftheswitchdoesnotturnitonandoff. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
• Disconnecttheplugfromthepowersourceand/orthebatterypackfromthepowertoolbefore
makinganyadjustments,changingaccessories,orstoringpowertools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
• Storeidlepowertoolsoutofthereachofchildrenanddonotallowpersonsunfamiliarwiththe
powertoolortheseinstructionstooperatethepowertool. Power tools are dangerous in the hands
of untrained users.
• Maintainpowertools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
• Keepcuttingtoolssharpandclean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Usethepowertool,accessories,toolbits,etc.,inaccordancewiththeseinstructions,takinginto
accounttheworkingconditionsandtheworktobeperformed.Use of the power tool for operations
different from those intended could result in a hazardous situation.
Battery tool use and care
• Rechargeonlywiththechargerspeciedbythemanufacturer.A charger that is suitable for one
type of battery pack may create a risk of re when used with another battery pack.
• Usepowertoolsonlywithspecicallydesignatedbatterypacks.The use of any other battery pack
may create a risk of injury and re.
• Whenthebatterypackisnotinuse,keepitawayfromothermetalobjects,suchaspaperclips,
coins,keys,nails,screws,orothersmallmetalobjectsthatcanmakeaconnectionfromone
terminaltoanother.Shorting the battery terminals together may cause burns or a re.
• Underabusiveconditions,liquidmaybeejectedfromthebattery.Avoid contact. If contact occurs,
ush with water. If liquid comes into contact with the eyes, seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Service
• Haveyourpowertoolservicedbyaqualiedrepairpersonusingonlyidenticalreplacement
parts. This will ensure that the safety of the power tool is maintained.

7 8
20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
SAFETY GUIDELINES SAFETY GUIDELINES
Specific safety guidelines for cordless reciprocating saws
WARNING!
To reduce the risk of electric shock or damage to the charger and battery, use only the
batteries and charger listed.
BATTERY PACK CHARGER
054-3124-0
054-3126-6
054-3125-8
• Holdthepowertoolbyitsinsulatedgrippingsurfaceswhenperforminganoperationwherethe
cuttingaccessorymaycontacthiddenwiring. If a cutting accessory contacts a “live” wire, it may
make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Useclampsoranotherpracticalwaytosupporttheworkpieceandsecureittoastableplatform.
Holding the work by hand or against your body leaves it unstable and may lead to loss of control.
• Alwaysremovethebatterypackbeforechangingthesawbladeand/oradjustingthesawbase.
• Thesawblademustbesecurelylockedinitsholder.Check that it has been securely seated before
use.
• Makecertainthatalladjustingleversandthebladeholderaretightbeforemakingacut.Loose
adjusting levers and holders can cause the tool or blade to slip; loss of control may result.
• Checkthattheswitchis“off”beforeattachingabatterypack.Accidental starting could cause
injury.
• Securematerialbeforecutting.Never hold the workpiece in your hand or across your legs. Small or
thin material may ex or vibrate with the blade, causing loss of control.
• Nevertouchthesawbladeimmediatelyafteruse.Itmaybehotafterprolongeduse.
• Alwayswearsafetygogglesoreyeprotectionwhenusingthistool. Use a dust mask or respirator or
connect the tool to an external dust vacuum if cutting generates a great amount of dust.
• Keephandsawayfromcuttingarea.Do not reach under the material being cut. The proximity of the
blade to your hand is hidden from your sight.
• Donotusedullordamagedsawbladesandaccessories.
Contents
Cordless Reciprocating Saw, hex wrench, 2 wood-cutting blades, instruction manual
WARNING!
Remove the Cordless Reciprocating Saw from the package and examine it carefully. Do not
discard the carton or any packaging material until all parts have been examined.
WARNING!
If any part of the Cordless Reciprocating Saw is missing or damaged, do not attach the
battery pack to the tool or use the tool until the part has been repaired or replaced. Failure to
heed this warning could result in serious injury.

9 10
20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
DESCRIPTION
Knowyourcordlessreciprocatingsaw
No. Description No. Description
1 Pivot shoe 4 Lock-off button
2 Tool-less Blade clamp lever 5 LED worklight
3 Variable-speed trigger switch 6 Tool-less Blade clamp
Before attempting to use this tool, become familiar with all of its operating features and safety
requirements. For optimum performance and safety, read the following operating instructions carefully
before using this product.
WARNING!
Do not allow familiarity with the Cordless Reciprocating Saw to cause a lack of alertness. A
fraction of a second of carelessness is enough to cause severe injury.
OPERATING INSTRUCTIONS
To attach battery pack (g 1)
CAUTION!
Avoid the possibility of accidental
starting. Always take care not to
activate the trigger switch when you
are attaching the battery pack or
performing other adjustments to the
tool.
NOTE: When placing a battery pack on the tool, be sure that the raised rib on the battery pack aligns with
the groove on the cordless Reciprocating Saw and the latches snap into place properly. Improper assembly
of the battery pack can cause damage to internal components.
1. Ensure that the trigger switch is in the “off” position.
2. Align the raised rib on the battery pack with the grooves on the bottom of the saw, and then attach the
battery pack to the saw.
To detach battery pack (g 1)
CAUTION!
Avoid the possibility of accidental starting. Always take care not to activate the trigger switch
when you are detaching the battery pack or performing other adjustments to the tool.
1. Ensure that the trigger switch is in the “off” position.
2. Depress the battery-release button located on the front of the battery pack to release the battery pack.
3. Pull the battery forward to remove from the tool.
fig 1
6
1
2
4
5
3

11
20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
OPERATING INSTRUCTIONS
12
OPERATING INSTRUCTIONS
Pivoting the shoe (g 4)
The shoe pivots to provide maximum contact with
the surface being cut.
1. Remove the battery pack from the saw.
2. Hold the saw securely, and then pivot the shoe
to the desired angle.
WARNING!
To avoid injury and damage, do not
operate the saw without the pivoting
shoe in place. The spindle may strike
against the workpiece and damage
the reciprocating mechanism.
Variable-speed trigger switch
(g 5)
Your reciprocating saw is equipped with a trigger
switch to turn the saw on and off, and to control the
speed.
1. To start the saw, depress the lock-off button and then squeeze the trigger switch.
2. To stop the saw, release the trigger switch and allow it to return to the “OFF” position.
3. To vary the speed, simply increase or decrease the pressure on the trigger switch. The more tightly the
trigger switch is squeezed, the higher the speed.
Electric brake
To stop the tool, release the trigger switch and allow the blade to come to a complete stop. The electric
brake quickly stops the motion. This feature engages automatically when you release the trigger switch.
fig 4
fig 5
Blade selection
To obtain the best performance from the saw, it is important to select the correct blade for the particular
application and type of material to be cut.
Blades with fewer teeth, e.g., 10 teeth per inch (TPI), are typically used for cutting wood; blades with more
teeth are better for cutting metal or plastic. We recommend 14 TPI blades for plastics and soft metals and
18 TPI blades for hard metals.
Installing a saw blade (g 2)
1. Remove the battery pack from the saw.
2. Pivot the blade-clamp lever to open the blade
clamp.
3. Insert the saw blade into the blade clamp as far
as possible, then release the blade-clamp lever
to lock the blade in position.
4. Check that the blade is securely attached.
Removing the saw blade (g 2)
1. Remove the battery pack from the saw.
2. Pivot the blade-clamp lever to open the blade
clamp.
3. Remove the saw blade from the blade clamp.
WARNING!
Never touch the saw blade
immediately after use. It may be hot
after prolonged use.
Base shoe adjustment (g 3)
For maximum control and longer blade life, the base assembly slides in and out to adjust the effective
stroke length.
1. Remove the battery pack from the saw.
2. Use the hex key (included) to loosen the two screws on the bottom of saw housing.
3. Adjust pivot to the desired position, and retighten both screws.
fig 2
fig 3

20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
1413
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
LED Worklight (g 6)
The LED worklight, located on the front of the saw,
provides additional light on the surface of the
worklight for operation in lower-light areas.
The LED worklight will come on when the trigger
switch is depressed. The LED worklight will turn off
when the trigger switch is released.
General cutting (g 7)
WARNING!
Before attaching the battery pack to
the tool, always check to determine
that the switch performs properly and
returns to the “OFF” position when
released.
WARNING!
Hold the tool only by the plastic handle
and the insulated grip area to help
prevent electrical shock. You may encounter electrical wiring when sawing into walls or floors.
Sawing into a “live” wire will cause electric shock.
1. Remove the battery pack from the saw.
2. Make sure that the workpiece is rmly clamped in place.
3. Use the appropriate type and size of blade for the workpiece material and size.
4. Adjust the pivoting shoe as necessary to make sure that the blade will extend beyond the shoe and the
workpiece at all times.
5. Adjust the pivoting shoe as necessary to expose unworn blade teeth for longer blade life.
6. Check for clearance behind the workpiece so that the blade will not impact another surface.
7. Mark the line of cut clearly. If cutting metal, apply cutting oil to the line.
8. Attach the battery pack to the saw.
9. Hold the saw rmly with both hands. Make sure to keep your hands on the insulated gripping areas only.
10. Depress the lock-off button and trigger switch to start the saw and bring it to the maximum desired
cutting speed before applying the blade to the workpiece.
11. Place the at surface of the shoe rmly on the workpiece while cutting. Use only enough steady
pressure on the blade to keep the saw cutting; do not force the tool.
12. Reduce pressure as the blade comes to the end of the cut.
13. Allow the saw to come to a complete stop before removing the blade from the workpiece.
14. If sawing berglass, plaster, wallboard, or spackling compound, clean the motor vents frequently with
a vacuum or compressed air. These materials are highly abrasive and may accelerate the wear on
motor bearings and brushes.
WARNING!
Always wear safety goggles when cleaning tools with compressed air.
WARNING!
Do not allow familiarity with the saw to make you careless. One careless fraction of a second
is enough to inflict serious injury.
NOTE: Cutting speeds should vary with the workpiece. Hard materials, such as metals, require lower
speeds; use higher speeds for softer materials.
fig 6
fig 7

20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
1615
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
Plunge cutting (g 8)
Your reciprocating saw is ideal for plunge cutting
directly into surfaces that cannot be cut from an
edge, such as walls or oors. Plunge cutting may be
performed two ways, depending on how the blade is
inserted.
Column A shows how to plunge cut with the teeth
of the blade facing down. Column B shows how to
plunge cut with the teeth of the blade facing up.
WARNING!
Do not plunge cut into metal surfaces.
1. Remove the battery pack from the saw.
2. Make sure that the workpiece is rmly clamped
in place.
3. Use the appropriate type and size of blade for the workpiece material and size.
4. Insert the blade into the tool.
5. Adjust the pivoting shoe as necessary to make sure that the blade will extend beyond the shoe and the
workpiece at all times.
6. Adjust the pivoting shoe as necessary to expose unworn blade teeth for longer blade life.
7. Check for clearance behind the workpiece so that the blade will not impact another surface.
8. Attach the battery pack to the saw.
9. If the blade is inserted with the teeth facing downward, hold the tool as shown in column A, resting the
edge of the shoe on the workpiece.
10. With the blade just above the workpiece, depress the lock-off button and trigger the switch to start the
saw and bring it to the maximum desired cutting speed. Then, using the edge of the shoe as a pivot,
lower the blade into the workpiece.
11. As the blade starts cutting, raise the handle of the tool slowly, until the at surface of the shoe rests
rmly on the workpiece.
12. After the blade has penetrated through the workpiece, continue sawing along the marked cutting line.
NOTE: To make plunge cutting easier, use a heavy gauge blade and install the blade with the teeth facing
upward as show in Column B.
WARNING!
To reduce the risk of explosion, electric shock and property damage, always check the work
area for hidden gas pipes, electrical wires or water pipes when making blind or plunge cuts.
WARNING!
To avoid loss of control and serious injury, make sure that the blade reaches maximum speed
before touching it to the workpiece.
WARNING!
Do not make plunge cuts in metal materials.
Metal cutting
The saw can be used to cut metals, such as sheet steel, pipe, steel rods, aluminum, brass, and copper. Be
careful not to twist or bend the saw blade. Do not force the tool.
The use of cutting oil is recommended when cutting soft metals and steel. Cutting oil will keep the blade
cool, increase cutting action, and prolong blade life.
WARNING!
Never use gasoline, because normal sparking could ignite the fumes.
1. Securely clamp the workpiece in position, and make the cut close to the clamping point to minimize
vibration.
2. When cutting conduit pipe or angle iron, clamp the work in a vise, if possible, and cut close to the vise.
3. To cut thin sheet material, “sandwich” the material between pieces of hardboard or plywood, and
clamp the layers together to reduce vibration and tearing of the material.
fig 8

17 18
20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
MAINTENANCE
General maintenance
WARNING!
To avoid personal injury, always remove the battery pack from the tool when cleaning or
performing any maintenance.
WARNING!
Do not let brake fluids, gasoline, petroleum-based products, penetrating oil, etc. come into
contact with plastic parts. These substances contain chemicals that can damage, weaken, or
destroy plastic.
The tool may be cleaned most effectively with compressed dry air. Always wear safety goggles when
cleaning tools with compressed air. Before each use:
• Inspectthecordlesstoolandthetriggerswitchfordamage.
• Checkfordamaged,missing,orwornparts.
• Checkforloosescrews,misalignmentorbindingofmovingparts,oranyotherconditionthatmayaffect
the operation.
• Ifabnormalvibrationornoiseoccurs,turnthecordlesstooloffimmediately,andhavetheproblem
corrected before further use.
WARNING!
When servicing, use only identical replacement parts. The use of any other parts may create a
hazard or cause damage to the product.
WARNING!
Use only accessories that are recommended for this Reciprocating Saw by the manufacturer.
Accessories that may be suitable for one tool may become hazardous when used with another
tool.
WARNING!
To ensure safety and reliability, all repairs should be performed by a qualified service
technician.
PROBLEM POSSIBLE CAUSES SOLUTIONS
The motor does not start. The battery is depleted. Charge the battery pack.
The blade binds, jams, or
burns the wood.
The blade is dull. Replace the blade.
An improper blade is being used. Replace the blade.
The
blade is warped. Replace the blade.
The saw vibrates or
shakes.
The blade is damaged. Replace the blade.
The blade is loose.
Remove the blade and reinstall it.
If the problem remains unsolved after performing the checks described above, call the toll-free helpline at
1-800-689-9928.
TROUBLESHOOTING

Explodedview No. Part No. Description No. Part No. Description
01 3810008000 Reciprocating Saw Blade 34 5670244000 Pin
201 2822578000 Plunger Assembly 35 3704168000 Clamp
02 5660145000 Circlips For Shaft 36 2822287000 Pivot Shoe
03 3421211000 Rotate Bush 37 3704272000 Slip Bush
04 5670194000 Pin 38 5620050000 Screw
05 5670199000 Pin 39 4360001000 LED
06 3551279000 Bush 40 3321455000 Right Housing
07 3660386000 Torsion Spring 41 5610106000 Tapping Screw
08 3125769000 Sleeve 42 3660075000 Spring
10 2823422000 Plunger Assembly 43 3126627000 Button
11 5670247000 Pin 44 4870391000 Switch
12 5670303000 Pin 45 5690192000 O Ring
13 3520428000 Clamp Block 46 3520429000 Pinion
14 3704263000 Plate 47 2730193000 Motor
15 5610057000 Thread Forming Screw 48 3402627000 Contact Receptacle Assembly
16 5620489000 Screw With Washer 49 5680031000 Hexagon Wrench
17 3704262000 Gear Case Cover
18 5660027000 Circlips For Shaft
19 3520431000 Crank Roller
20 5650302000 Washer
21 2822591000 Gear Set
22 5700006000 Ball Bearing
23 5660164000 Circlips for Hole
24 5700199000 Ball Bearing
25 3420844000 Gear Case
26 3124566000 Clamp Block
28 5620213000 Hexagon Socket Screw
29 5650015000 Spring Washer
30 3124565000 Clamp Block
31 3402364000 Lever
32 3321456000 Left Housing
33 3660260000 Torsion Spring
19 20
20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
PARTS LIST PARTS LIST

YEAR
3
LIMITED WARRANTY
†
21 22
20V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-420V max* LITHIUM-ION CORDLESS RECIPROCATING SAW - 054-8151-4
This Mastercraft product is guaranteed three (3) years from the
date of original retail purchase against defects in materials and
workmanship, except for the following components:
a) Component A: Batteries, chargers and carrying case, which are
guaranteed for a period of 2 years from the date of original retail
purchase against defects in workmanship and materials;
b) Component B: Accessories, which are guaranteed for a period of
1-year from the date of original retail purchase against defects
in workmanship and materials.
Subject to the conditions and limitations described below, this product, if returned to us with proof
of purchase within the stated warranty period and if covered under this warranty, will be
repaired or replaced (with the same model, or one of equal value or specification), at our option. We will
bear the cost of any repair or replacement and any costs of labour relating there to.
These warranties are subject to the following conditions and
limitations:
a) a bill of sale verifying the purchase and purchase date must be provided;
b) this warranty will not apply to any product or part thereof which is worn or broken or which has become
inoperative due to abuse, misuse, accidental damage, neglect or lack of proper installation, operation or
maintenance (as outlined in the applicable owner’s manual or operating instructions) or which is being
used for industrial, professional, commercial or rental purposes;
c) this warranty will not apply to normal wear and tear or to expendable parts or accessories that may be
supplied with the product which are expected to become inoperative or unusable after a reasonable
period of use;
d) this warranty will not apply to routine maintenance and consumable items such as, but not limited to,
fuel, lubricants, vacuum bags, blades, belts, sandpaper, bits, uids, tune-ups or adjustments;
e) this warranty will not apply where damage is caused by repairs made or attempted by others (i.e.
persons not authorized by the manufacturer);
f) this warranty will not apply to any product that was sold to the original purchaser as a reconditioned or
refurbished product (unless otherwise specied in writing);
g) this warranty will not apply to any product or part thereof if any part from another manufacturer is
installed therein or any repairs or alterations have been made or attempted by unauthorized persons;
h) this warranty will not apply to normal deterioration of the exterior nish, such as, but not limited to,
scratches, dents, paint chips, or to any corrosion or discolouring by heat, abrasive and chemical cleaners;
and
WARRANTY WARRANTY
i) this warranty will not apply to component parts sold by and identied as the product of another company,
which shall be covered under the product manufacturer’s warranty, if any.
Additional Limitations
This warranty applies only to the original purchaser and may not be transferred. Neither the retailer
nor the manufacturer shall be liable for any other expense, loss or damage, including, without limitation,
any indirect, incidental, consequential or exemplary damages arising in connection with the sale,
use or inability to use this product.
Notice to Consumer
This warranty gives you specic legal rights, and you may have other rights, which may vary from province
to province. The provisions contained in this warranty are not intended to limit, modify, take away from,
disclaim or exclude any statutory warranties set forth in any applicable provincial or federal legislation.
Imported by Mastercraft Canada Toronto, Canada M4S 2B8
IMPORTED BY MASTERCRAFT CANADA TORONTO, CANADA M4S 2B8