Matador BHD220 User manual

TECHNICAL PARAMETER SUBJECT TO CHANGE WITHOUT NOTICE
HEAVY DUTY BAND SAW MACHINE
INSTRUCTION
MODEL NO.:BHD220

TECHNICAL PARAMETER SUBJECT TO CHANGE WITHOUT NOTICE
WARNING
READ INSTRUCTIONS BEFORE OPERATING BANDSAW
1， ALWAYS KEEP MACHINE AWAY BEYOND THE REACH OF CHILDREN
2， TO PROTECT AGAINST ELECTRICAL SHOCK, DO NOT IMMERSE SWITCH, CORD, PLUG OR STUFFER IN WATER
OR OTHER LIQUIDS.
3， PLEASE RECHECK THIS MACHINE BEFORE USING
4，PLEASE MAKE SURE TO INSTALL LEAKAGE PROTECTION DEVICES, MUST BE CONNECTED WITH THE EARTH WIRE
DO NOT OPERATE THIS APPLIANCE WITH A DAMAGED CORD, PLUG OR MALFUNCTIONS
5，KEEP FINGERS AND HANDS AWAY OF ALL MOVING PARTS
6，DO NOT CLEAN MACHINE WITH SPRAY WATER,
7, UNPLUG THIS APPLIANCE WHEN NOT IN USE OR BEFORE CLEANING
8，STRICTLY ACCORDING TO THE INSTRUCTIONS TO OPERATE THE EQUIPMENT WILL GREATLY PROLONG ITS
SERVICE LIFE
9，PLEASE MAKE SURE TO INSTALL LEAKAGE PROTECTION DEVICES, MUST BE CONNECTED WITH THE EARTH WIRE
THE MANUFACTURER SHOULD NOT BE RESPONSIBLE FOR THE DAMAGE WHICH CAUSED BY IMPROPER
OPERATION
NOTE: PLEASE SEND MACHINE TO QUALIFIED REPAIR MAN IF IT CANNOT WORK, DO NOT REPAIR MACHINE BY
YOURSELF
ALWAYS UNPLUG BEFORE CLEANNING OR
MAINTENANCE
WARNING
SAFETY
FIRST

TECHNICAL PARAMETER SUBJECT TO CHANGE WITHOUT NOTICE
CONNECTION
HAVE AN ELECTRICAL TECHNICIAN CONNECT THE BANDSAW. MAKE SURE BANDSAW IS RUNNING IN THE RIGHT
DIRECTION AS INDICATED BY THE ARROW
DO NOT TAMPER WITH ELECTRICALS
OPERATING INSTRUCTIONS
1. MAKE SURE BLADE IS TENSIONED PROPERLY (DO NOT OVER TENSION BLADE
2. START MACHINE
3. CUT THE REQUIRED MEAT
4. USE BANDSAW BLADE
5. KEEP BODY PARTS AWAY FROM RUNNING BLADE. AS SERIOUS INJURY CAN OCCUR
6. IN THE EVENT OF MACHINE TRIPPING PUSH RESET BUTTON
CLEANING INSTRUCTIONS
WASH MACHINES DOWN AFTER OPERATION
USE ONLY A WET RAG TO CLEAN.
NOT A HOSE
DO NOT IMMERSE TOP WHEEL IN WATER. DAMAGE TO BEARINGS CAN ACCIR
USE WET RAG. DO NOT PUT WATER NEAR ELECTRIC BOX SWITCH
NON-COMPLIANCE OF ABOVE INSTRUCTIONS WILL RENDER WARRANTY NULL AND VOID
ELECTRIC WIRE DIAGRAM

TECHNICAL PARAMETER SUBJECT TO CHANGE WITHOUT NOTICE
TECHNICAL SPECIFICATION:
Name Heavy duty band saw machine
Mode No. BHD220
Machine size ( mm) 860x850x1900
Power supp y 220~240V/ 50Hz
Power 1500 W
Tab e size(L*W)mm 800*720
N.W. 142 Kgs
COMPONENTS