Matelec FLU-06020-S User manual

®
ATelec
AUSTRALIA
MATELEC AUSTRALIA. P 1800 281 282. F 1300 281 282
[e-mail]. WWW.MATELECAUSTRALIA.COM.AU
FLU-06020-S OXFORD LED BATTEN WITH SENSOR
SUMMARY
The Oxford LED Weatherproof Batten range from MATelec Australia is a market leading product,
for premium installations.
SPECIFICATIONS - BATTEN
• IP66 Weatherproof Rating
• IK08 Vandal Resistance
• Polycarbonate lens and base - UV stabilised (reproof PC 850˚C VI)
• Stainless Steel clips - 304 Grade (316 Grade available as option)
• All xings and brackets supplied
• 5700k - Daylight Colour
• Operating Temperature: -35˚C to 60˚C
• TRIDONIC LED driver
• Quick connect wiring connector
• High output LED chip
• Lumen/Watt: 130Im/w
• Power Factor: 0.98
• SAA Approved
• 10 year warranty
• 50,000 hours working life
SPECIFICATIONS - MICROWAVE SENSOR
• Sensing Range: 100%, 75%, 30%, 25%
• Time Delay: 5sec/30sec/90sec/ 3min/20min/30min
• Daylight Sensor: Disable/50lux/ 30lux/10lux/2lux
• Mounting Height: 3-6m
• Detection Distance: 5m Max
INSTRUCTION MANUAL
DESIGNED BY AUSTRALIANS, FOR AUSTRALIA

MATELEC AUSTRALIA. P 1800 281 282. F 1300 281 282
[e-mail]. WWW.MATELECAUSTRALIA.COM.AU
INSTALLATION
All eletrical connections relating to this installation must be carried out by a suitably qualied electrician.
Ensure mains power is off before attempting installation.
FITMENT INSTRUCTIONS
1. Drill 6mm Ø hole, and use 6x30 wall plugs to x the mounting bracket to the wall/ceiling.
Fig 1.1
The Oxford can be mounted in 3 ways:
Ceiling mount
Fig 1.2
Wall mount
Fig 1.3
Suspended mounting - Jack chain suspension
Fig 1.4
press it in
1 45 2 55
1 26 2 26

MATELEC AUSTRALIA. P 1800 281 282. F 1300 281 282
[e-mail]. WWW.MATELECAUSTRALIA.COM.AU
2. To install the batten, rstly open the lens clips, (Fig 2.1), remove the diffuser (Fig 2.2), and press the
stainless brackets to remove the gear tray (Fig 2.3)
Fig 2.1 Fig 2.2 Fig 2.3
3. Loosen the cable gland, push the cable through the gland (Fig 3.1)
Connect power cord as below (Fig 3.2)
Fig 3.1 Fig 3.2
4. Tighten the cable gland as shown below, and ret the gear tray (Fig 4.1). Close the diffuser.
WHITE
BLACK
GREEN
Fig 4.1
ADJUSTING THE MICROWAVE SENSOR
5.The FLU-06020-S includes a premium microwave sensor, the MC060S, as shown below (Fig 5.1).
Antenna module Daylight sensor
Adjustable detection area
Hold-time
Daylight threshold
220-240V output
220-240V input
Fig 5.1

678
2Lux ON ON ON
10Lux ON ON -
25Lux - ON -
50Lux ON - -
Disable - - -
345
5S ON ON ON
30S - ON ON
90S ON - ON
3min - - ON
20min ON ON -
30min - - -
1 2
100% ON ON
75% - ON
50% ON -
25% - -
MATELEC AUSTRALIA. P 1800 281 282. F 1300 281 282
[e-mail]. WWW.MATELECAUSTRALIA.COM.AU
6. Adjustments can be made to the sensor as below.
Detection Area (Switch 1 & 2) (Fig 6.1).
Fig 6.1
Hold Time (Switch 3, 4 & 5) (Fig 6.2)
Fig 6.2
Daylight Sensor (Switch 6, 7 & 8) (Fig 6.3)
Fig 6.3
WARRANTY
The FLU-06020-S is covered by the exclusive MATelec Australia 10 year warranty. Please ensure you retain the
original purchase invoice, and certicate of electrical safety in the relevant state to tment, in the unlikely
event of a warranty claim in the future.