Matrix SATATYA NVR0801X User manual

SATATYA NVR
Quick Start

Matrix SATATYA PARAM NVR
Video Surveillance Solution
Quick Start
SECURITY SOLUTIONS

Documentation Disclaimer
Matrix Comsec reserves the right to change, at any time, without prior notice, the product design,
specifications, components, as engineering and manufacturing may warrant.
This is a general documentation for all models of the product. The product may not support some of the
features and facilities described in the documentation.
Information in this documentation may change from time to time. Matrix Comsec reserves the right to revise
information in this publication for any reason without prior notice. Matrix Comsec makes no warranties with
respect to this documentation and disclaims any implied warranties. While every precaution has been taken in
the preparation of this quick start, Matrix Comsec assumes no responsibility for errors or omissions. Neither
is any liability assumed for damages resulting from the use of the information contained herein.
Neither Matrix Comsec nor its affiliates shall be liable to the purchaser of this product or third parties for
damages, losses, costs or expenses incurred by the buyer or third parties as a result of: accident, misuse or
abuse of this product or unauthorized modifications, repairs or alterations to this product or failure to strictly
comply with Matrix Comsec's operating and maintenance instructions.
Warranty
For product registration and warranty related details visit us at:
http://www.matrixvideosurveillance.com
Copyright
All rights reserved. No part of this quick start may be copied or reproduced in any form or by any
means without the prior written consent of Matrix Comsec.
Safety Instructions
The product contains coin cell battery which is to be kept away from children. If swallowed, can
cause severe internal burns.
Certification
Version 7
Release date: August 11, 2021
Devices Compliance
NVR0801X/NVR1601X, NVR1602X/NVR3202X,
NVR3204X/NVR6404X, NVR6408X

Table of Contents i
Contents
Know Your SATATYA NVR ............................................................................ 1
Naming Convention ........................................................................................... 2
The Interfaces ................................................................................................... 3
NVRX Panel ...................................................................................................... 4
The User Interface ............................................................................................. 8
Installing SATATYA NVR ............................................................................. 10
What Your Package Contains ......................................................................... 10
Things You Will Need ...................................................................................... 11
Preparing for Installation ................................................................................. 11
Installing the Hard Disk ................................................................................... 15
Connecting Devices ........................................................................................ 23
Connecting Power Supply ............................................................................... 25
Accessing the SATATYA NVR .................................................................... 26
Accessing the Local View ................................................................................ 26
Accessing the Remote View ............................................................................ 27
Accessing the SATATYA Device Application .................................................. 29
Quick Setup .................................................................................................. 36
Configuring SATATYA NVR ........................................................................ 49
Formatting the Hard Disk ................................................................................ 49
Configuring Network Settings .......................................................................... 49

Matrix SATATYA NVR Quick Start 1
Know Your SATATYA NVR
Thank you for choosing the Matrix SATATYA NVRX Series.
This Quick Start is meant to help you get familiar with SATATYA NVRX Series, install the device
and configure its basic parameters.
To view or download the documents related to this product, scan the QR Code printed on the
Product Label/Packaging Label.
You may also view or download the documents from https://www.matrixvideosurveillance.com/
product-manuals.html
For product registration and warranty related details, please visit https://
www.matrixcomsec.com/product-registration-form.html
Mentioned below are the variants of the product. The main difference is in the number of cameras
and hard disks supported.
NVR0801X: This NVR is having configuration of maximum 8 IP channels and 1 hard disk.
NVR1601X: This NVR is having configuration of maximum 16 IP channels and 1 hard disk.
NVR1602X: This NVR is having configuration of maximum 16 IP channels and 2 hard disk.
NVR3202X: This NVR is having configuration of maximum 32 IP channels and 2 hard disk.
NVR3204X: This NVR is having configuration of maximum 32 IP channels and 4 hard disk.
NVR6404X: This NVR is having configuration of maximum 64 IP channels and 4 hard disk.
NVR6408X: This NVR is having configuration of maximum 64 IP channels and 8 hard disk.

Matrix SATATYA NVR Quick Start 2
Naming Convention
Built on a high performance embedded microprocessor and video compression technology,
SATATYA NVR provides uninterrupted performance while recording, monitoring and playback,
best image quality with minimum storage space requirement. In addition to efficient local and
remote monitoring.
This Quick Start guide is meant to help you get familiar with SATATYA NVRX, install the device and
configure its basic parameters.
This is a common document for all the configurations of SATATYA NVRX series.
The terms NVRX, NVR, Satatya NVR, SATATYA NVR, Matrix SATATYA NVR and Network
video recorder are used interchangeably. The configurations for specific variant of NVRX
is mentioned explicitly.
Please read this document carefully before you begin the installation, and retain it for future
reference.
For complete product information and for detailed instructions on the installation and
configuration of SATATYA NVRX, you may refer the Matrix SATATYA System Manual.
SATATYA NVR 08 01 X
Product
Name
Hard Disks
01: 1 HDD
02: 2 HDD
04: 4 HDD
08: 8 HDD
IP Channels
08: 8CH
16: 16CH
32: 32CH
64: 64CH
Extreme

3 Matrix SATATYA NVR Quick Start
The Interfaces

Matrix SATATYA NVR Quick Start 4
NVRX Panel
NVR0801X/NVR1601X
NVR1602X/NVR3202X

5 Matrix SATATYA NVR Quick Start
NVR3204X/NVR6404X/NVR6408X
Ports and Connectors
Interface Description All Variants
USB 1
(Upper)
USB 2.0, used for Scheduled Backup.
To connect USB Mouse.
To connect Dongle.
Yes
Ratings: 5VDC - 500mA
USB 2
(Lower)
USB 2.0, used to connect USB Mouse.
To connect Dongle.
Yes
Ratings: 5VDC - 500mA
USB 3
USB 3.0, used for Manual Backup.
To connect USB Mouse.
To connect Dongle.
Yes
Ratings: 5VDC - 900mA
Alarm In
(Terminal Block Plug) To connect a sensor device to detect
alarm events.
Yes (2)
ALARM OUT
(Terminal Block Plug) To connect an alarm sounding relay
device such as a hooter or siren.
Yes (1)
HDMI 2.0 To connect a high definition digital
monitor or TV for Main view.
Yes (1)

Matrix SATATYA NVR Quick Start 6
General Specifications
LAN
(RJ45)
To connect a standalone personal
computer, or a LAN Switch, or to connect
to the Internet over a DSL Modem or
Router.
Ethernet Speed:10/100/1000Mbps
LAN 1 - Present in all variants
LAN 2 - Present in all variants except
NVR0801X and NVR1601X
Audio IN
(RCA)
To connect audio input device such as a
mike.
Yes (1)
Audio OUT
(RCA)
To connect a low impedance earphone,
active sound box or an amplified speaker.
Yes (1)
Reset
Press and hold down the reset button for
atleast 4 seconds to default
the following parameters.
• LAN Settings
• User Settings
• General Settings
Yes
Parameters NVR0801X, NVR1601X, NVR1602X,
NVR3202X NVR3204X, NVR6404X, NVR6408X
Power supply 12VDC, 5A SMPS
Operating Temperature 0°C to +50°C (32°F to 122°F)
Humidity 5% to 95% RH Non-Condensing
Interface Description All Variants

7 Matrix SATATYA NVR Quick Start
LED And Buzzer State
The NVRX variants has a set of LEDs and Buzzer for indication of events on the SATATYA NVRX
series. It has been explained in the table below.
State Description Status LED Cadence Power LED Buzzer (System)
Supply is connected but
application is not yet initialized. OFF
Green
Steady
N.A.
On Application Initialization Red
1000 - ON and 1000 – OFF 3000 – ON
System in normal state
(Connected to network).
Green
3000-ON and 1000-OFF N.A.
Storage Incomplete Volume. Red
1000 ON–5000 OFF 1000 - ON and 5000 – OFF
Storage Full Alert. Red
2000-ON–2000 OFF N.A.
Storage Full. Red
1000 ON–3000 OFF N.A.
Formatting Disk. Red
1000 ON–1000 OFF N.A.
Firmware upgrade in process. Orange
1000 ON–2000 OFF N.A.
Firmware upgrade failed. Red
1000 ON–1000 OFF 1000 - ON and 1000 – OFF
Trigger from Event N.A. N.A 3000 - ON and 1000 – OFF
Backup Device full N.A. N.A 1000 - ON and 2000 – OFF
No Backup Device N.A. N.A 1000 - ON and 3000 – OFF

Matrix SATATYA NVR Quick Start 8
The User Interface
You can view recordings, operate and configure SATATYA NVR locally (on-site), or from any
location across the world on a network computer. You can also view live videos on smart phones.
Local View
The Local View enables on-site access to live and stored videos of SATATYA NVR. You can access
all the features and configure the NVR settings on the Monitor connected to your NVR. You can
operate the device using a USB mouse and USB Keyboard.
Remote View
SATATYA NVR offers you two options for Remote View: A Device Client and SATATYA SIGHT.

9 Matrix SATATYA NVR Quick Start
Device Client
The SATATYA Device Client enables access to live and stored video images of SATATYA NVR from
a remote location through the Web. Using the Device Client you can access, search, browse,
display and transfer stored video to a remotely connected workstation. You can configure the NVR
and camera settings, receive notification of events such as alarm, motion detection and video
loss.
SATATYA SIGHT
SATATYA SIGHT is a mobile application which supports live view of the channels and allows the
user to view the live recordings any time, anywhere, on your smart devices
SATATYA SIGHT supports Android, Windows and iOS-based devices.
To know more, user can refer FAQs for Android, Windows and iOS respectively.
The Virtual Keypad
A virtual keypad will appear when you select an option on the Local View that requires you to type
digits or alphabets.
If you are using a Mouse for operation,
• Click the digits or alphabets on the virtual keypad with the mouse and press the Enter button.
• Click the space bar to insert space.
•ClicktheShift key to change case (upper case or lower case) for the alphabets.
USB Keyboard
For enhanced accessibility and faster navigation, various functions in the Local Client can be
performed using keyboard shortcuts. A list of available shortcut keys with the action they
perform, have been broadly classified in Matrix SATATYA System Manual. Refer the same for
detailed information.

Matrix SATATYA NVR Quick Start 10
Installing SATATYA NVR
WARNING!
• Opening or removing the device cover without adequate precautions may result in
electric shock or exposure to other hazards.
• To reduce the risk of electric shock, do not perform any servicing other than that
contained in the instructions in this document, unless you are qualified to do so.
Servicing should be done by a qualified technician only.
• Use the product only for the purpose for which it was designed.
What Your Package Contains
Common Package contents
• SATATYA NVR unit
• A Quick Start Guide
•AUSBMouse
• Alarm Out Terminal Plug
NVR0801X/NVR1601X
• A 12VDC @ 5A power adapter
• 4 HDD fitting screws
•1HDDPowerCable
•1HDDSATACable
NVR1602X/NVR3202X
• A 12VDC @ 5A power adapter
• 8 HDD fitting screws
•2HDDPowerCable
•2HDDSATACable
•2ClampsforRackMounting
NVR3204X/NVR6404X
•1CableMains3Pin
• 16 HDD fitting screws
•4HDDSATACable
•2ClampsforRackMounting

11 Matrix SATATYA NVR Quick Start
NVR6408X
•1CableMains3Pin
• 32 HDD fitting screws
•8HDDSATACable
•2ClampsforRackMounting
Things You Will Need
• A Power Hand Drill
• A Wire Stripper
• Insulation Tape
• A Screwdriver set
• Cameras (IP Cameras, PTZ cameras).
• Monitors (HDMI) with the appropriate cables to connect.
• At least one SATA Video Surveillance Hard Disk (upto 10TB), if you want to record on a hard
disk in the NVR. You can install eight hard disks.
• A USB Mouse or Keyboard (Wired or Wireless) to operate the NVR, if required.
• A personal computer or a LAN computer with a browser installed on it (Internet Explorer,
Mozilla Firefox, Google Chrome), if you want access the NVR from a remote location.
• Any audio device you want to connect with cables.
• An Ethernet cable to connect to a computer/LAN/WAN (over a DSL Modem or Router).
• Insulated copper wires (wire range: 28-16 AWG, 0.5 -1.5mm2), if you want to connect
sensor and alarm devices.
• A rack, if you want to mount the NVR on a rack.
Preparing for Installation
• Select a suitable location after reviewing your video surveillance layout requirements, cable
runs and power needs.
• The SATATYA NVR is meant for indoor installations only.
• The SATATYA NVR unit can be mounted on a rack or placed on any stable flat surface
such as a desk.
• Select a suitable location for installation taking the following recommendations into
consideration. The location should
• be secure, yet easily accessible for servicing the equipment.
• not expose the device to extreme heat or moisture, high voltages.
• have adequate ventilation to prevent overheating.
• be clear of any obstructions to the ventilation holes on the side panels of the NVR.
• have a power outlet close by.

Matrix SATATYA NVR Quick Start 12
• Complete the wiring and installation of all the devices you want to connect to SATATYA NVR.
• Unpack SATATYA NVR and check the package contents.
Do not discard the packaging material. If any of the items is missing or damaged, please
contact the source from where you purchased the product.
• You are recommended to first install the hard disk(s), make the required cable connections,
and then mount the device. If you choose rack mounting, fix the side clamps and then mount
the device.
• Refer to the following diagrams for the location of screws that you will need to remove and
secure when installing the hard disks and the rack mounting side clamps.
NVR0801X/NVR1601X

13 Matrix SATATYA NVR Quick Start
NVR1602X/NVR3202X
NVR3204X/NVR6404X

Matrix SATATYA NVR Quick Start 14

15 Matrix SATATYA NVR Quick Start
NVR6408X
Installing the Hard Disk
Number Of HDDs supported in Various NVRX variants
NVRX series supports maximum eight Hard disks. The storage capacity of each hard disk is upto
10 Terabytes. Following table shows Hard disk support in each variant.
NVRX variants Number of supported SATA interfaces
NVR0801X/NVR1601X 1
NVR1602X/NVR3202X 2
NVR3204X/NVR6404X 4
NVR6408X 8