Quick-Start Guide7 8
Screen Options and Indoor Flight
Now that the drone ight test is complete, let’s go through the screen,
FPV attachment, and indoor ight options.
If the screen is wanted during ight,connect the antennas and just
hold the “on” button and it will automatically connect to the drone
camera. (Make sure the drone is already on). You can also see the
satellites used for GPS lock in the bottom left corner of the screen. To
use the FPV goggles, simply attach the screen to the headset and it
will automatically switch to FPV mode.
Since GPS lock is quite hard to receive most places indoors, you
need to force arm without GPS lock to y. For this, bring the left stick
down to the bottom right where the label says “force arm” and then
ip the regular arming switch at the top right. Your drone is now good
to y.
