Max Burton 6905 User manual

Max Burton®Digital Stove To Go®#6905
IMPORTANT SAFEGUARDS
Read all instructions before operating•
Do not immerse cord or plug in water or other liquids•
Do not let cord hang over edge of table or counter•
Do not use for anything other than its intended use•
Do not touch hot surfaces•
Unplug when not in use and before cleaning•
There are no serviceable parts. Do not dismantle.•
Allow unit to cool before storing•
Administer close supervision when using around children•
This unit will not shut off automatically. Turn off immediately after use.•
Warning: This product is designed to get very hot very quickly. Handle with care.
Willremainhotforasignicantperiodafterithasbeenunplugged.AthenaBrands
is not responsible for any damage caused by use or misuse of this product whether
intentional or accidental.
PARTS IDENTIFICATION
OPERATION
The Digital Stove To Go functions like many home appliances and may be used similar to a
stove, oven, or slow cooker. Use the digital temperature and heat controls to cook, re-heat,
and slowly cook foods while traveling. Foods may be prepared in advance and packaged in
convenient serving sizes for cooking later in the Digital Stove To Go. A cookbook is included to
get you started.
NOTE: Due to the high operating wattage of this unit, it is necessary for the vehicle engine or
other power source to be running whenever the Stove is on. Failure to do so may result in low
vehicle battery power or damage to the Stove.
Place the Stove on a level surface.1.
Insert the power plug into your vehicle’s 12-volt power receptacle. The red LED2.
INDICATOR light on the plug will illuminate showing that power is available; and the red
POWER INDICATOR light on the control panel will be illuminated showing that the Stove is
ready for operation.
Cooking Instructions (default = HEAT MODE):
Press the ON/OFF button1.
The LCD window will show the temperature inside the cooking compartment and the HEAT2.
MODE indicator light will illuminate.
Press the FUNCTION button to switch between HEAT Mode and TEMP Mode.3.
Press to LATCH to open the lid to access the cooking containers.4.
Place food in the removable5. COOKING PAN and/or STEAMING/WARMING TRAY.Both
items are non-stick. Never place food directly inside of the inner heating compartment.
Do not exceed the maximum liquid level indicated on the side of the COOKING PAN.6.
Do not operate Stove if the cooking pan is removed from the Stove for long periods of time.7.
CAUTION: Never place sealed cans of food in the Stove as they may explode when heated.
Only use oven safe food containers or other packaging inside of the cooking pan as other
materials could burn or melt.
HEAT MODE:
In this mode the temperature will rise to a maximum of 350°F. The actual temperature will be
displayed in the LCD window during cooking. To stop cooking in this mode, switch to OFF or
press the FUNCTION button to switch to Temperature Mode.
TEMP MODE:
The Temperature Mode has 11 temperature settings for precise cooking between 100°F and
350°F.Thedefaultsettingis200°FandwillashintheLCDwindowsixtimesandthenstop.To
change the temperature setting, press the UP or DOWN button to select your desired setting.
Thenewsettingwillalsoashsixtimesandthenstop.
STEAMING/WARMING TRAY:
Use to steam or warm vegetables, or other foods. Put a small amount of water in the bottom of
the cooking pan and place the tray with desired food on top of the pan. Use the TEMP mode at
200°F or lower.
CLEANING
Unplug Stove and allow it to cool down before cleaning.1.
Clean the outside with damp cloth and dry with a clean soft cloth. Do not immerse.2.
Cooking Pan and Steaming Tray is dishwasher safe or may be cleaned in hot, soapy water.3.
Rinse and dry thoroughly.
Removeable,
Non-Stick
Cooking Pan
Max Fill Line
12-volt Plug
LCD Window
& Control Panel
Display
Latch
Removeable Steam/Warm
Tray (sits on top of the
Removeable Cooking Pan)
Lid
Handle
LED Indicator
Power ON/Off Button
& Indicator Light
Function Button
& Indicator Lights
Up/Down Buttons

Digital stove to go®
OPERATING INSTRUCTIONS
OPERATION IN VEHICLES
Make sure that your battery is strong and in good working condition before plugging the•
Digital Stove To Go into your vehicle’s 12-volt receptacle.
Do not use the unit if your vehicle’s electrical system is weak or damaged.•
Periodically check your vehicle’s charging system for continued successful use.•
Alwaysuseonaatsurface.•
TROUBLESHOOTING
If the 12-volt circuit fails to operate, try the following suggestions:
Unplug from the power supply an make sure that the receptacle is clean. DO NOT USE1.
METAL TOOLS. If cleaning is needed, use only insulators, such as wood.
Check the plug’s fuse. Carefully unscrew the plug’s top section. Remove and check2.
the fuse with the proper electronic meter. If defective, replace with correct fuse (see
specicationfortype).Alsocheckthevehicle’sfusepanel.
Some cigarette lighters have a separate circuit breaker located directly behind the3.
cigarette lighter receptacle. If you lighter is not working, this circuit breaker may
have blown and could require replacement. Consult your vehicle owner’s manual for
replacement.
SPECIFICATIONS
POWER SOURCE 12V DC
POWER CONSUMPTION 150-175 Watts
FUSE 250V 20A glass fuse
MAX TEMPERATURE 350°F (176°C)
CORD LENGTH 5 ½ ft.
WEIGHT 4.5 lbs. (2. kg)
OUTSIDE DIMENSIONS
REMOVABLEPANDIMENSIONS
REMOVABLETRAYDIMENSIONS
11.75” x 8.5” x 7.87”
5.8” X 5.8” X 4”
6.25” X 6” X 1.375”
LIQUID CAPACITY 1.5 liters
CONSTRUCTION PP and aluminum
Aervoe Industries, Inc.
Gardnerville,NV89410•1-800-227-0196
www.aervoe.com•[email protected]
6905inst; cs2/12
Patent Pending