Max Keystone DPG100 User manual

05/09/16
Rotate the base 180°
on both Latch and the
Button.
IMPORTANT: Be
careful not to disturb
inner components.
Left or
Right?
RIGHT
GATE
LEFT
GATE
Undo
screws
START
CENTERLINE
OF LATCH
3/4"
SPINDLE
THRU
HOLE
GATE
FRAME
3/4"
FIG. 1
Spindle
12mm Screw
30mm
Screw
Cut 11-13mm
Longer than Gate Post
Spindle Tube
MUST be fitted
Spindle Tube to be
11 to 13mm longer
than Gate Post
Spindle
INSIDE LATCH
OUTSIDE LATCH
CENTERLINE
OF LATCH
3/4"
SPINDLE
THRU
HOLE
GATE
FRAME
3/4"
FIG. 1
Spindle
12mm
Screw
30mm
Screw
Cut 11-13mm
Longer than Gate Post
Spindle Tube
MUST be fitted
Spindle Tube to be
11 to 13mm longer
than Gate Post
Spindle
INSIDE
LATCH
OUTSIDE
LATCH
CENTERLINE
OF LATCH
3/4"
SPINDLE
THRU
HOLE
GATE
FRAME
3/4"
FIG. 1
Spindle
12mm Screw
30mm
Screw
Cut 11-13mm
Longer than Gate Post
Spindle Tube
MUST be fitted
Spindle Tube to be
11 to 13mm longer
than Gate Post
Spindle
INSIDE LATCH
OUTSIDE LATCH
180°
The Latch is set-up for Right-
Handed gates. With some simple
steps the Latch is ready for
Left-Handed gates.
View from inside the Property
Make these changes for
Left-Hand Gates.
Sit Striker in Latch and mark the Striker’s centre on gate.
Drill pilot holes and mount.
Test the locking and unlocking of the Latch and Button.
13mm
7mm
Maintenance
• Inspect Latch annually or more frequently if the gate is used often.
• Only lubricate with powdered graphite lubricant. No petroleum-based lubricants, oils etc.
• Keep Latch free of contaminants
To protect the
Latch from slam
damage add a
Gate Stop.
CENTERLINE
OF LATCH
3/4"
SPINDLE
THRU
HOLE
GATE
FRAME
3/4"
FIG. 1
Spindle
12mm
Screw
30mm
Screw
Cut 11-13mm
Longer than Gate Post
Spindle Tube
MUST be fitted
Spindle Tube to be
11 to 13mm longer
than Gate Post
Spindle
INSIDE
LATCH
OUTSIDE
LATCH
CENTERLINE
OF LATCH
3/4"
SPINDLE
THRU
HOLE
GATE
FRAME
3/4"
FIG. 1
Spindle
12mm Screw
30mm
Screw
Cut 11-13mm
Longer than Gate Post
Spindle Tube
MUST be fitted
Spindle Tube to be
11 to 13mm longer
than Gate Post
Spindle
INSIDE LATCH
OUTSIDE LATCH
GRAVITY
Latch
one-Way
Access
- Lockable
- Suits 40mm + Posts
- Hi-Impact
Polymer
DPG100
GRAVITY
Latch
one-Way
Access
- Lockable
- Suits 40mm + Posts
- Hi-Impact
Polymer
DPG100
GRAVITY
Latch
one-Way
Access
- Lockable
- Suits 40mm + Posts
- Hi-Impact
Polymer
DPG100

37 33
57 25
140
60
101
32 35
43 29
89
37 33
57 25
140
60
101
32 35
43 29
89

Note: Swimming pool gates, fences and their hardware systems are designed to aid and not subs tute for adult supervision. To
the extent this product is used around a pool, prior to installing, consult local licensing and safety authori es for approvals and/
or requirements. The Keystone® will operate properly only if installed in accordance with instruc ons.
Maintenance: The Keystone® latches should be inspected annually, or more frequently if the gate is used o en. Use a non-toxic
lubricant on all moving parts. Use mild soap & water to clean exterior body or unit. Always remove key upon locking.
Occasionally re ghten all moun ng screws to assure proper opera ons. Please make sure product is adjusted properly per
originally supplied instruc ons.
WARRANTY
MANUFACTURER’S
NATIONWIDE INDUSTRIES Tampa, Florida 33619 USA
Keystone® Series Latches
What Does This Warranty
Cover? This warranty covers
materials and workmanship
as well as any loss of
func onality in your new
Keystone®, with the
excep ons stated below.
What Will Na onwide Do?
In the event of any defect in
material or workmanship or
loss of func onality in the
product coveredunder this
warranty, manufacturer will
replace such Keystone® with
a new Keystone® (or, in the
event the Keystone® is no
longer available, a latch
similar thereto) at no charge.
How Does State Law Apply?
This warranty gives you
specifi c legal rights, and you
may also have other rights
which vary from state to
state.
How Long Does the
Coverage Last? This warranty
to the original purchaser (end
user) runs for the dura on
of one million cycles of use.
Na onwide Industries assumes
this is a true life me of use on
residen al applica ons, and
for commercial applica ons
will use an es mate of usage
based on each applica on.
How Do You Get Service?
In the event of any defect in
material or workmanship, or
failure in the Keystone® latch
covered under this warranty,
return the product, please
return the Keystone® postage
paid, together with proof of
purchase and a brief wri en
descrip on of the problem to
Na onwide Industries, 10333
Windhorst Road, Tampa,
Florida 33619, A en on:
Customer Service Manager.
What Does This Warranty Not Cover? This warranty is void
in its en rety in the event the Keystone® is tampered with,
altered, misused, eglected, damaged, improperly installed
or maintained, repaired or a empted to be repaired by an
unauthorized person, or used in any manner which is not in
accordance with the instruc ons provided by manufacturer.
Manufacturer’s aggregate liability in damages or otherwise
shall not exceed the payment, if any, received by manufacturer
for the Keystone® furnished to you which is the subject of
a claim or dispute. In no event shall manufacturer be liable,
whether in contract, in tort, under warranty, in negligence or
otherwise for incidental, consequen al, or special damages of
any kind whatsoever, howsoever caused.
DISCLAIMER: A pool owner or operator is always responsible
for the safety of those in or around the pool and, to the extent
this product is used around a pool, the manufacturer and sup-
plier of this device cannot and will not accept such responsibil-
ity. In addi on, the manufacturer and supplier of this device
cannot and will not accept responsibility for unauthorized
modifi ca ons to or for defec ve or inadequate maintenance
of this device. No modifi ca on to this device whatsoever is to
be made other than with respect to the adjustments outlined
in the installa on instruc ons. If this device fails to func on
properly, it should be returned promptly to the supplier for
replacement.
Eff ec ve for products sold a er 1/1/15.
Million Cycle Warranty and Liability Limitation