Max the Legend User manual

www.watch-max.com

Please note: It has come to our attention that there are additional instructions needed to operate the
Legend watch by MAX Watches. In order to create a proper seal for water resistance, you must follow
the instructions below.
1. Step One: Pull the Crown all the way out to set the time.
2. Step Two: Once the desired time is set, push the Crown in until you feel it click.
3. Step Three: While pushing the Crown in, screw it clockwise until it won’t screw down any further.
4. Step Four: Verify that there is no space or gap between the Crown and the case of the watch.
Once you follow these steps properly, the Legend watch will be water resistant up to 200 meters.
Users manual - the LEGEND ENG
24
20
Normal position
1st position
(change time)
Crown
MAX the LEGEND
www.watch-max.com