MAXDATA PLATINUM 7200 IR User manual

User’s Manual
MAXDATA PLATINUM 7200 IR

2 3MAXDATA PLATINUM 7200 IR M7Contents
2 3MAXDATA PLATINUM 7200 IR M7Contents

2 3MAXDATA PLATINUM 7200 IR M7Contents
2 3MAXDATA PLATINUM 7200 IR M7Contents
Contents
1 Safety Information 7
Safety Warnings and Cautions ................................................................................................................7
Intended Application Uses ......................................................................................................................7
General Warnings....................................................................................................................................8
Place Battery Marking ........................................................................................................................8
Site Selection ..........................................................................................................................................9
Equipment Handling Practices ................................................................................................................9
Power Cord Warnings ...........................................................................................................................10
System Access Warnings .....................................................................................................................10
Rack Mount Warnings...........................................................................................................................11
Electrostatic Discharge (ESD)................................................................................................................11
Other Hazards .......................................................................................................................................11
Battery Replacement........................................................................................................................11
Cooling and Airflow ..........................................................................................................................11
Laser Peripherals or Devices............................................................................................................12
2 Platform Description 13
Platform Features..................................................................................................................................14
Platform Front .......................................................................................................................................15
Standard Control Panel..........................................................................................................................16
Platform Rear ........................................................................................................................................18
Processors.............................................................................................................................................19
System Memory....................................................................................................................................19
Available Memory Configurations ....................................................................................................20
Power Subsystem .................................................................................................................................21
Power Supply Modules ....................................................................................................................21
Cooling Subsystem ...............................................................................................................................23
Hot-swap PCI Slots ...............................................................................................................................24
Peripherals.............................................................................................................................................25
Hot-Swap Hard Drive........................................................................................................................25
Removable Media Drive Bay Support ..............................................................................................25
5 ¼-inch Half-height Drive Bay .........................................................................................................25
System Board Set .................................................................................................................................26
Main Board ............................................................................................................................................26
Video Support........................................................................................................................................29
Ethernet Support ...................................................................................................................................29
Memory Board ......................................................................................................................................30
I/O Riser Board (optional) ......................................................................................................................31
SAS Riser Board (optional) ....................................................................................................................32
3 Starting Up and Shutting Down the Server 33
Powering On the Server........................................................................................................................33
Shutting Down the Server.....................................................................................................................33

4 5MAXDATA PLATINUM 7200 IR M7Contents
4 5MAXDATA PLATINUM 7200 IR M7Contents
4 Server Platform Utilities 35
BIOS Setup Utility .................................................................................................................................35
BIOS Setup Utility Page Layout.............................................................................................................35
Keyboard Commands ............................................................................................................................36
Console Redirection ..............................................................................................................................37
Serial Configuration Settings ............................................................................................................37
Keystroke Mappings.........................................................................................................................38
Setup Alias Keys...............................................................................................................................38
Limitations........................................................................................................................................38
Interface to Server Management .....................................................................................................38
Sample Setup for Console Redirection ............................................................................................38
Extensible Firmware Interface (EFI) Shell .............................................................................................39
5 User Serviceable Platform Components 43
Tools and Supplies Needed...................................................................................................................43
Removing and Installing the Top Cover.................................................................................................43
Removing the Top Cover..................................................................................................................44
Installing the Top Cover....................................................................................................................44
Hot-swapping a Front System Fan ........................................................................................................45
Hot-swapping a Rear System Fan .........................................................................................................45
Hot-swapping Hard Disk Drives ............................................................................................................47
Determining Drive Status .................................................................................................................47
Removing a Hard Disk Drive ............................................................................................................48
Mounting a Hard Disk Drive in a Carrier ...........................................................................................48
Installing a Hard Disk Drive Assembly..............................................................................................48
Hot-swapping Power Supplies ..............................................................................................................49
Removing a Power Supply ...............................................................................................................49
Installing a Power Supply .................................................................................................................49
Installing and Removing PCI Cards .......................................................................................................50
Removing Hot-plug PCI Card with Operating System Hot-Plug Interface........................................50
Removing Hot-plug PCI Card with Hardware Hot-Plug Interface .....................................................51
Installing a Hot-plug PCI Add-in Card................................................................................................52
Removing a Non-Hot-Plug PCI Card .................................................................................................53
Installing a Non-Hot-Plug PCI Card ...................................................................................................53
Installing and Removing Memory Boards .............................................................................................54
Removing a Memory Board .............................................................................................................54
Installing a Memory Board ...............................................................................................................55
Installing and Removing DIMMs ...........................................................................................................55
Memory Population Rules ................................................................................................................55
Installing DIMMs ..............................................................................................................................57
Removing DIMMs ............................................................................................................................58

4 5MAXDATA PLATINUM 7200 IR M7Contents
4 5MAXDATA PLATINUM 7200 IR M7Contents
6 Replacing the CMOS Battery 59
7 Regulatory and Integration Information 61
Product Regulatory Compliance ............................................................................................................61
Product Safety Compliance ..............................................................................................................61
Product RoHS Compliance ....................................................................................................................61
Product EMC Compliance .....................................................................................................................61
Product Regulatory Compliance Markings ............................................................................................61
Electromagnetic Compatibility Notices .................................................................................................61
Europe (CE Declaration of Conformity) ............................................................................................61
Appendix A: POST Codes 63
POST Progress Codes and Messages ..................................................................................................64
POST Error Messages and Handling .....................................................................................................67
POST Error Beep Codes........................................................................................................................78

6 PBMAXDATA PLATINUM 7200 IR M7Contents
Figures
1. PLATINUM 7200 IR Server Front View...........................................................................................13
2. Front Components ..........................................................................................................................15
3. Front Panel Controls and Indicators ................................................................................................16
4. Rear Platform Features ...................................................................................................................18
5. Memory Boards...............................................................................................................................19
6. Power Supply Indicators..................................................................................................................22
7. Rear Fan Locations..........................................................................................................................23
8. Hard Drive Carrier............................................................................................................................25
9. Main Board Component Locations..................................................................................................27
10. Main Board Jumpers.......................................................................................................................28
11. Memory Board LEDs and Connectors.............................................................................................30
12. I/O Riser Board Connectors.............................................................................................................31
13. SAS Riser Connectors.....................................................................................................................32
14. Removing the Top Cover.................................................................................................................44
15. System Fan Location and Removal.................................................................................................45
16. Removing a Rear System Fan.........................................................................................................46
17. Hard Disk Drive Carrier....................................................................................................................47
18. Attaching the Hard Drive to the Carrier...........................................................................................48
19. PCI Slot Attention Button................................................................................................................51
20. Opening Memory Board Latches ....................................................................................................54
21. Removing a Memory Board ............................................................................................................54
22. Minimum Memory Population.........................................................................................................55
23. Memory Board A and B Population.................................................................................................56
24. Memory Board A, B, C, D Population..............................................................................................56
25. Remove Memory Board DIMM Cover ............................................................................................57
26. Install DIMMs..................................................................................................................................58
27. Removing the Battery .....................................................................................................................60
Tables
1. Safety Warnings and Cautions ..........................................................................................................7
2. Chassis Feature Summary ..............................................................................................................14
3. Front Components ..........................................................................................................................15
4. Front Panel Controls and Indicators ................................................................................................16
5. Rear Platform Features ...................................................................................................................18
6. Power Supply Indicators..................................................................................................................22
7. Power Indicator ...............................................................................................................................24
8. Attention Indicator...........................................................................................................................24
9. Hard Disk Drive Carrier....................................................................................................................25
10. Main Board Component Locations..................................................................................................27
11. Hot-Plug Memory Board LEDs and Buttons....................................................................................30
12. BIOS Setup Utility Page Layout.......................................................................................................35
13. BIOS Setup: Keyboard Commands .................................................................................................36
14. EFI Shell Commands .......................................................................................................................40
15. Hard Disk Drive Carrier....................................................................................................................47
16. Product Certification Markings........................................................................................................61
17. Port 80 POST Code LEDs................................................................................................................63
18. POST Progress Codes and Messages ............................................................................................64
19. POST Error Manager Messages and Handling................................................................................68
20. Beep Codes.....................................................................................................................................78

7MAXDATA PLATINUM 7200 IR M7
1 Safety Information
This document applies to MAXDATA PLATINUM Server Boards, MAXDATA PLATINUM Server Chassis
(pedestal and rack-mount) and installed peripherals. To reduce the risk of bodily injury, electrical shock,
fire, and equipment damage, read this document and observe all warnings and precautions in this
guide before installing or maintaining your MAXDATA PLATINUM server product.
In the event of a conflict between the information in this document and information provided with the
product or on the website for a particular product, the product documentation takes precedence.
Your server should be integrated and serviced only by technically qualified persons.
You must adhere to the guidelines in this guide and the assembly instructions in your server manuals
to ensure and maintain compliance with existing product certifications and approvals. Use only the
described, regulated components specified in this guide. Use of other products/components will void
the UL Listing and other regulatory approvals of the product, and may result in noncompliance with
product regulations in the region(s) in which the product is sold.
Safety Warnings and Cautions
To avoid personal injury or property damage, before you begin installing the product, read, observe,
and adhere to all of the following safety instructions and information. The following safety symbols
may be used throughout the documentation and may be marked on the product and/or the product
packaging.
Table 1. Safety Warnings and Cautions
Indicates potential hazard if indicated information is ignored
Indicates shock hazard that results in serious injury or death if safety
instructions are not followed
Indicates hot components and surfaces
Indicates electrostatic discharge cautions
Indicates do not touch fan blades, may result in injury
Indicates to unplug all AC power cord(s) to disconnect AC power
Intended Application Uses
This product was evaluated as Information Technology Equipment (ITE), which may be installed in
offices, schools, computer rooms, and similar commercial type locations. The suitability of this product
for other product categories and environments (such as medical, industrial, residential, alarm systems,
and test equipment), other than an ITE application, may require further evaluation.

8 Safety Information
General Warnings
The power supply in this product contains no user-serviceable parts.There may be
more than one supply in this product. Refer servicing only to qualified personnel.
Do not attempt to modify or use the supplied AC power cord if it is not the exact type
required. A product with more than one power supply will have a separate AC cord
for each supply.
The DC push-button on/off switch on the front panel does not turn off system AC
power.To remove power from the system, you must unplug each AC power cord
from the wall outlet or power supply.
Ensure that the system is disconnected from its power source and from all telecom-
munication links, networks, and modem lines whenever the chassis cover is to be
removed.This may require disconnecting multiple power cords. Do not operate the
system with the cover removed.
A microprocessor and heat sink may be hot if the system has been running. Also,
there may be sharp pins and edges on some board and chassis parts. Contact should
be made with care. Consider wearing protective gloves.
Danger of explosion if the battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the equipment manufacturer. Discard used
batteries according to manufacturer’s instructions.
Depending on the weight of the product, two people together should lift it.
The system is designed to operate in a typical office environment. Choose a site that
is:
• Clean and free of airborne particles (other than normal room dust).
• Well ventilated and away from sources of heat including direct sunlight.
• Away from sources of vibration or physical shock.
• Isolated from strong electromagnetic fields produced by electrical devices.
• In regions that are susceptible to electrical storms, we recommend you plug your
system into a surge suppresser and disconnect telecommunication lines to your
modem during an electrical storm.
• Provided with a properly grounded wall outlet.
• Provided with sufficient space to access the power supply cords, because they
serve as the product’s main power disconnect.
Place Battery Marking
There is insufficient space on this server board to provide instructions for replacing and disposing of
the battery. For system safety certification, the following statement or equivalent statement may be
required to be placed permanently and legibly on the chassis near the battery.
 CAUTION
Risk of explosion if battery is incorrectly replaced.
Replace with only the same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.

9MAXDATA PLATINUM 7200 IR M7
Site Selection
The system is designed to operate in a typical office environment. Choose a site that is:
• Clean, dry, and free of airborne particles (other than normal room dust).
• Well-ventilated and away from sources of heat including direct sunlight and radiators.
• Away from sources of vibration or physical shock.
• Isolated from strong electromagnetic fields produced by electrical devices.
• In regions that are susceptible to electrical storms, we recommend you plug your system
into a surge suppresser and disconnect telecommunication lines to your modem during an
electrical storm.
• Provided with a properly grounded wall outlet.
• Provided with sufficient space to access the power supply cord(s), because they serve as the
product’s main power disconnect.
Equipment Handling Practices
Reduce the risk of personal injury or equipment damage:
• Conform to local occupational health and safety requirements when moving and lifting
equipment.
• Use mechanical assistance or other suitable assistance when moving and lifting equipment.
• To reduce the weight for easier handling, remove any easily detachable components.
 CAUTION
The power button, indicated by the stand-by power marking, DOES NOT completely turn off the system
AC power, 5 V standby power is active whenever the system is plugged in. To remove power from
system, you must unplug the AC power cord from the wall outlet. Your system may use more than
one AC power cord. Make sure all AC power cords are unplugged. Make sure the AC power cord(s)
is/are unplugged before you open the chassis, or add or remove any non hot-plug components.
Do not attempt to modify or use an AC power cord if it is not the exact type required. A separate AC
cord is required for each system power supply.
Some power supplies in MAXDATA PLATINUM Servers use Neutral Pole Fusing. To avoid risk of
shock use CAUTION when working with power supplies that use Neutral Pole Fusing.
The power supply in this product contains no user-serviceable parts. Do not open the power supply.
Hazardous voltage, current and energy levels are present inside the power supply. Return to
manufacturer for servicing.
When replacing a hot-plug power supply, unplug the power cord to the power supply being replaced
before removing it from the server.
To avoid risk of electric shock, turn off the server and disconnect the power cord, telecommunications
systems, networks, and modems attached to the server before opening it.

10 Safety Information
Power Cord Warnings
If an AC power cord was not provided with your product, purchase one that is approved for use in
your country.
 CAUTION
To avoid electrical shock or fire, check the power cord(s) that will be used with the product as
follows:
• Do not attempt to modify or use the AC power cord(s) if they are not the exact type required to
fit into the grounded electrical outlets
• The power cord(s) must meet the following criteria:
- The power cord must have an electrical rating that is greater than that of the electrical
current rating marked on the product.
- The power cord must have safety ground pin or contact that is suitable for the electrical
outlet.
• The power supply cord(s) is/are the main disconnect device to AC power. The socket outlet(s)
must be near the equipment and readily accessible for disconnection.
• The power supply cord(s) must be plugged into socket-outlet(s) that is /are provided with a
suitable earth ground.
System Access Warnings
 CAUTION
To avoid personal injury or property damage, the following safety instructions apply whenever accessing
the inside of the product:
• Turn off all peripheral devices connected to this product.
• Turn off the system by pressing the power button to off.
• Disconnect the AC power by unplugging all AC power cords from the system or wall outlet.
• Disconnect all cables and telecommunication lines that are connected to the system.
• Retain all screws or other fasteners when removing access cover(s). Upon completion of
accessing inside the product, refasten access cover with original screws or fasteners.
• Do not access the inside of the power supply. There are no serviceable parts in the power
supply. Return to manufacturer for servicing.
• Power down the server and disconnect all power cords before adding or replacing any non hot-
plug component.
• When replacing a hot-plug power supply, unplug the power cord to the power supply being
replaced before removing the power supply from the server.
 CAUTION
If the server has been running, any installed processor(s) and heat sink(s) may be hot. Unless you
are adding or removing a hot-plug component, allow the system to cool before opening the covers.
To avoid the possibility of coming into contact with hot component(s) during a hot-plug installation,
be careful when removing or installing the hot-plug component(s).
 CAUTION
To avoid injury do not contact moving fan blades. If your system is supplied with a guard over the
fan, do not operate the system without the fan guard in place.

11MAXDATA PLATINUM 7200 IR M7
Rack Mount Warnings
The equipment rack must be anchored to an unmovable support to prevent it from tipping when a
server or piece of equipment is extended from it. The equipment rack must be installed according to
the rack manufacturer’s instructions.
Install equipment in the rack from the bottom up, with the heaviest equipment at the bottom of the
rack.
Extend only one piece of equipment from the rack at a time.
You are responsible for installing a main power disconnect for the entire rack unit. This main disconnect
must be readily accessible, and it must be labeled as controlling power to the entire unit, not just to
the server(s).
To avoid risk of potential electric shock, a proper safety ground must be implemented for the rack
and each piece of equipment installed in it.
Electrostatic Discharge (ESD)
 CAUTION
ESD can damage disk drives, boards, and other parts. We recommend that you perform all procedures
at an ESD workstation. If one is not available, provide some ESD protection by wearing an antistatic
wrist strap attached to chassis ground - any unpainted metal surface - on your server when handling
parts.
Always handle boards carefully. They can be extremely sensitive to ESD. Hold boards only by their
edges. After removing a board from its protective wrapper or from the server, place the board
component side up on a grounded, static free surface. Use a conductive foam pad if available but
not the board wrapper. Do not slide board over any surface
Other Hazards
Battery Replacement
 CAUTION
There is the danger of explosion if the battery is incorrectly replaced. When replacing the battery, use
only the battery recommended by the equipment manufacturer.
Dispose of batteries according to local ordinances and regulations.
Do not attempt to recharge a battery.
Do not attempt to disassemble, puncture, or otherwise damage a battery.
Cooling and Airflow
 CAUTION
Carefully route cables as directed to minimize airflow blockage and cooling problems. For proper
cooling and airflow, operate the system only with the chassis covers installed. Operating the system
without the covers in place can damage system parts. To install the covers:
1. Check first to make sure you have not left loose tools or parts inside the system.
2. Check that cables, add-in boards, and other components are properly installed.
3. Attach the covers to the chassis according to the product instructions.

12 Safety Information
Laser Peripherals or Devices
 CAUTION
To avoid risk of radiation exposure and/or personal injury:
• Do not open the enclosure of any laser peripheral or device.
• Laser peripherals or devices are not user serviceable.
• Return to manufacturer for servicing.

PB 13MAXDATA PLATINUM 7200 IR M7Platform Description
2 Platform Description
The PLATINUM 7200 IR Server is a compact, high-density, rack-mount system with support for one
to four Intel®Xeon™ MP processors and 256 GB of 533 MHz / 667 MHz FBDIMM memory. The
platform supports hot plug PCI-Express add-in cards; hot-swap, redundant power supply modules;
hot swap, redundant cooling fans; memory with RAS features; and hot-swap hard disk drives. The
server platform is shown below.
Figure 1. PLATINUM 7200 IR Server Front View

14 15MAXDATA PLATINUM 7200 IR M7Platform Description
14 15MAXDATA PLATINUM 7200 IR M7Platform Description
Platform Features
The platform features are outlined in the following table.
Table 2. Chassis Feature Summary
Feature Description
Dimensions Height: 6.8 inches (173 mm)
Width: 17.6 inches (447 mm)
Depth: 27.8 inches (706 mm)
Weight of fully configured system: 90 lbs (40 kg)
Clearance
requirements
• Front clearance: 3 inches (76 mm)
• Side clearance: 1 inch (25 mm)
• Rear clearance: 6 inches (152 mm)
Configuration
flexibility/
Scaleability
• Support for one to four processors
• Support for at least two generations of processors
• Support for up to four 2.5-inch SATA hard drives, or eight 2.5-inch SAS hard
drives with optional SAS riser board
• Support for up to seven PCI-Express adapters:
- Four x8 slots
-Three x4 slots
• Support for up to 256 GB Fully Buffered DIMM (FBD) Double Data Rate-2
(DDR2) 533 or 667 MHz memory
• Support for two integrated gigabit LAN ports, or four integrated gigabit LAN
ports with optional I/O riser board
Serviceability • Front access to hot-swap hard disk drives
• Front access to hot-swap fans
• Rear access to hot-swap power supplies
• System power and system status LEDs
• System ID buttons and LEDs on front panel and rear of system
• Memory status LEDs
• Processor failure LEDs
• Color-coded parts to identify hot-swap and non-hot-swap serviceable
components
Availability • Two hot-plug PCI Express slots
• Up to two 1570-watt power supplies in a redundant (1+1) configuration; the
second power supply is optional
• Dual power cords (1+1) when two power supplies are installed
• Up to eight hot-swap system fans in a redundant (7+1) configuration; two
rear fans are optional; four rear fans are required for redundancy
• Eight hot-swap 2.5-inch SAS hard drives
• SAS RAID riser board (optional) with a battery-backed DDR2 DIMM for disk cache
Manageability • Remote management
• Emergency Management Port (EMP)
• Intelligent Platform Management Interface (IPMI) 1.5 compliant, partial IPMI
2.0 compliance
• Wired For Management (WfM) 2.0 compliant
• Remote diagnostics support
• Optional Intel®Remote Management Module 2 provides remote KVM and
media features (requires optional I/O riser)
Front control panel • System power button and LED
• System reset button
• NMI button
• System ID button and LED
• System status LED
• Hard drive status LED
• LAN1 and LAN2 status LEDs
• Video connector
• Three USB 2.0 ports

14 15MAXDATA PLATINUM 7200 IR M7Platform Description
14 15MAXDATA PLATINUM 7200 IR M7Platform Description
Platform Front
Figure 2. Front Components
Table 3. Front Components
Item Description
A. CD-ROM / DVD-ROM drive bay
B. 5 ¼ peripheral bay
C. Video connector
D. USB 2.0 ports
E. Front control panel
F. Hot-swap fan modules (2)
G. Hot-swap disk drives (0-7, from left to right)
ABCE
D
GFF

16 17MAXDATA PLATINUM 7200 IR M7Platform Description
16 17MAXDATA PLATINUM 7200 IR M7Platform Description
Standard Control Panel
The standard control panel provides a user interface for system management via switches and status
LEDs. The control panel also contains the speaker. Figure 3 shows the location of the buttons and
status LEDs on the standard control panel.
Figure 3. Front Panel Controls and Indicators
Table 4. Front Panel Controls and Indicators
Item Feature Description
Front Panel Connectors
AVideo connector Video port, standard VGA compatible, 15-pin connector
BThree USB connectors Three USB 2.0 ports, 4-pin connectors
Front Panel Buttons and LED Indicators
CHard Drive Activity LED
(Green/Amber)
Indicates hard drive activity and fault status.
LED State Description
Green, On A hard drive is
being initialized.
Green, Blinking A hard drive is
active.
Amber, On Hard drive/slot
failure.
Amber, Slow Blinking
(~1 Hz)
A predictive hard
drive/slot failure or
rebuild in process.
Amber, Fast Blinking
(~2.5 Hz)
Hard drive rebuild
interrupted or
rebuild on empty
slot.
D,
E
LAN1, LAN2 Status LEDs
(Green)
Indicates LAN activity status
LED State Description
Off Idle
On Inactive No Access
Blinking Active Access
AB
J L
K
C ED FH
G
I

16 17MAXDATA PLATINUM 7200 IR M7Platform Description
16 17MAXDATA PLATINUM 7200 IR M7Platform Description
Item Feature Description
FSystem Status/Fault LED
(Green/Amber)
Indicates system status.
LED State Description
Off Not ready AC Power Off,
POST error
Green, On Ready System booted
and ready
Green, Blinking Degraded CPU or DIMM
disabled
Amber, On Critical Alarm Critical Power
Supply, Blower,
Voltage, or
Temperature
failure
Amber, Blinking Non-Critical
Alarm
Redundant Power
Supply or Blower
failure. Non-
Critical Blower,
Voltage, and
Temperature
failure.
GSystem Power LED
(Green)
Indicates system power status.
LED State ACPI
Off Power off No
On Power on No
Off S4/S5 Yes
Blinking S1 Yes
On S0 Yes
HSystem ID LED (Blue) Identifies the system via server management or locally.
INMI button Asserts NMI.
JSystem Reset button Press to reset the system.
KSystem Power button Press to turn the system power on or off.
LSystem ID button Press to turn the System ID LED on or off.

18 19MAXDATA PLATINUM 7200 IR M7Platform Description
18 19MAXDATA PLATINUM 7200 IR M7Platform Description
Platform Rear
This diagram shows the system with the optional I/O panel installed.
Figure 4. Rear Platform Features
Table 5. Rear Platform Features
Item Description
APCI Slots
Slot 1 PCI Express x8, hot-plug
Slot 2 PCI Express x8, hot-plug
Slot 3 PCI Express x8, not hot-plug
Slot 4 PCI Express x8, not hot-plug
Slot 5 PCI Express x4, not hot-plug
Slot 6 PCI Express x4, not hot-plug
Slot 7 PCI Express x4, not hot-plug
BIntel®Remote Management Module 2 (RMM2) NIC
CI/O riser Ethernet ports (two)
DUSB ports (two)
EStandard VGA-compatible video port with 15-pin connector
FSerial port B connector
GPower supply LEDs
Power Supply LED Power Supply Status
Left: Power good (green) Power supply is on
Center: Fault (amber) Power supply failure
Right: AC OK (green) Power supply is connected to AC
HAC input power connector
II/O riser card (optional)
JLAN 1 (left), LAN 2 (right) RJ45 Ethernet connectors
LAN Port LED LAN Status
Status LED (green) Off: No Ethernet connected
On: Ethernet link detected
Blink: Ethernet link active
Speed LED (green / amber) Off: 10 Mbps
Green: 100 Mbps
Amber: 1000 Mbps
B C
1 7432 5 6
A
DFG
K
HLM
J
I N
E

18 19MAXDATA PLATINUM 7200 IR M7Platform Description
18 19MAXDATA PLATINUM 7200 IR M7Platform Description
Item Description
KPower supply LEDs
Power Supply LED Power Supply Status
Left: Power good (green) Power supply is on
Center: Fault (amber) Power supply failure
Right: AC OK (green) Power supply is connected to AC
LAC input power connector
MSystem ID button
NBlue system ID LED to identify the system from among many systems
Processors
The PLATINUM 7200 IR Server supports from one to four 64-bit Intel®Xeon™ processors MP (7x00
sequence).
System Memory
The memory boards connect to the main board through x16 PCI Express connectors. One to four
memory boards can be installed, two on each side of the system. Memory board baffles are not needed
for empty memory board slots, but DIMM blanks are required for each socket on each memory board
in which a DIMM is not installed.
Figure 5. Memory Boards
Each memory board has these features:
• Supports up to eight FBD Generation-1 DIMMs
• Supports FBD speeds of 533MT/s (4-4-4, 5-5-5 latencies) and 667MT/s (5-5-5 latency)
• Supports FBDIMM configurations of x8, x4, single, dual-rank DDR2 DRAMs
• Supports DDR2 DRAM technologies of 512 Mbit, 1 Gbit, and 2 Gbit
• Supports Closed Loop Thermal Throttling with FBDIMM AMB temperature sensors
• LED fault indicators for each DIMM
• One field replaceable unit (FRU) EEPROM
• Supports memory mirroring and memory sparing
See “Memory Board” for additional information.

20 21MAXDATA PLATINUM 7200 IR M7Platform Description
20 21MAXDATA PLATINUM 7200 IR M7Platform Description
Available Memory Configurations
The BIOS configures the system memory into the best possible configuration after comparing the
current FBDIMM population with the desired memory configuration selected by the user in BIOS
Setup. Possible configurations are:
• Dual-channel Mode (Maximum Performance Mode): The default setting providing the
highest system performance and increased FBD bandwidth. This requires each lock-stepped
pair of FBDIMMs on a branch to be identical. A lock-stepped FBDIMM pair is defined as the
FBDIMMs installed in identically numbered FBDIMM sockets on both memory riser boards
(channels) on a given Memory Branch.
• Single-channel Mode: A failsafe mode when the installed memory configuration is
incompatible with dual-channel operation. In single-channel mode, only Branch 0, Channel 0 is
operational with all other FBDIMMs disabled automatically.
• DIMM Sparing Mode: Only supported in a lock-stepped (dual-channel) configuration. DIMM
Sparing is the use of a lock-stepped FBDIMM rank on a memory branch to provide a backup
in case any other lock-stepped FBDIMM rank on the same branch exceeds a user-selectable
Memory ECC Correctable Error threshold in a fixed time period. This failure prediction
mechanism allows the system to automatically:
- Copy the contents of a failing FBDIMM rank to a backup or spare FBDIMM rank
- Disable the failing FBDIMM rank
These actions are completed before the FBDIMM rank begins to generate more serious
memory ECC uncorrectable errors that would bring down the system by corrupting memory.
• Memory Mirroring Mode: Memory Mirroring is a high availability mode providing a redundant
image of the system memory. This image allows the system to continue operating if memory
ECC uncorrectable errors would otherwise bring down the system in another memory
configuration.