Maxima DIGITAL VAPOR User manual

ISTRUCTION
DIGITAL
VAPOR
USER MANUAL
LANGUAGE
EN

SAFETY RULES AND PRECAUTIONS FOR USE
• The plug must be removed from the socket before cleaning or maintenance of the device and after use.
• The device must not be left unattended while it is connected to the power supply.
• Do not put cleaning products or disinfectants inside the boiler tank (use water only).
• Do not turn the appliance upside down (risk of clogging the solenoid valve).
• Ensure that the surfaces and elements to be cleaned can withstand steam (tested on small surfaces).
• Do not use steam on velvet, satin and leather.
• Before connecting your appliance, check that the voltage corresponds to that written on the technical
label (220-240 V).
Do not use the device near people if they are not wearing protective clothing.
WARNING: High-pressure jets can be dangerous if used improperly. The jet must not be directed towards
people, animals, live electrical equipment or the device itself.
• Do not direct the jet towards yourself or other persons to clean clothing or footwear.
• Use this device only for its intended functions.
• Disconnect the power supply before servicing.
• To disconnect the appliance only pull the plug, never the cable.
• Take care that the power cable does not touch hot surfaces.
• Do not use the appliance if the power cable or other important parts are damaged, for example safety
devices, high-pressure hoses, control handle.
• To avoid any risk of electrocution, do not disassemble it.
• Avoid connecting several high-powered appliances on the same electrical circuit.
• If an extension cord is required, it must be equipped with a grounded plug and the plug and socket must
be of the immersion-proof type.
• If the power cable is damaged, it must be replaced by the manufacturer, a service centreor by qualified
personnel, to prevent any risk.
WARNING: unsuitable extension cords can be dangerous.
• Use an outlet with a grounded plug.
• Do not put the device in water and do not use it outdoors in rain or snow.
• Do not spray or wash the device.
• This device can be used by persons with reduced physical, sensory or mental capabilities or with lack of
experience and knowledge if supervised or instructed in the safe use of the machine and understood the
associated risks.
• Children must not play with the device.
• It is necessary to supervise children so that they do not play with the appliance.
• Cleaning and maintenance by the user must not be carried out by children without supervision.
• Keep the device out of the reach of children when it is being powered or cooling down.
• The device must not be used if, after falling, there are visible signs of damage or if it is leaking.
• Liquid or steam must not be directed towards equipment containing electrical components.
• Do not leave the connected appliance unattended.
• Remember to disconnect the device before any cleaning or maintenance and at the end of each use.
• Allow the appliance to cool down before storing it.
• Precautions during user maintenance: see page 3 - Commissioning and page 8 - Routine maintenance
• For any repairs, the device must be taken to an authorised service centre.
• To ensure the safety of the appliance, only use original spare parts supplied by the manufacturer or
approved by him.
WARNING: Hoses, accessories and fittings are important for the safety of the appliance; use
only those recommended by the manufacturer.
Any work carried out by unauthorised personnel voids the validity of the guarantee.
The manufacturer accepts no liability in the event of failure or damage as a result of use or improper
maintenance.
WARNING: DANGER OF BURNS

1
11
TABLE OF CONTENTS
DESCRIPTION OF THE MACHINE ...........................................................................................................PAGE 02
MACHINE OPERATIONS.........................................................................................................................PAGE 03
STEP 1: TANK FILLING ...........................................................................................................................................PAGE 03
STEP 2: TURNING ON.............................................................................................................................................PAGE 03
STEP 3: HOSE CONNECTION..................................................................................................................................PAGE 04
STEP 4: USE OF CONTROLS ON HANDLE..............................................................................................................PAGE 04
STEP 5: ADDITIONAL STEAM REGULATION .........................................................................................................PAGE 04
STEP 6: CONNECTING EXTENSIONS AND ACCESSORIES ......................................................................................PAGE 04
ACCESSORIES INCLUDE ........................................................................................................................PAGE 05
1. HANDLE WITH HOSE......................................................................................................................................PAGE 05
2. STEAM FLOOR BRUSH....................................................................................................................................PAGE 05
3. TRIANGULAR BRUSH WITH JOINT.................................................................................................................PAGE 05
4. WINDOW CLEANER........................................................................................................................................PAGE 05
5. STEAM LANCE WITH SPRAYER ......................................................................................................................PAGE 06
6. STANDARD BRUSHES .....................................................................................................................................PAGE 06
7. EXTENSIONS ...................................................................................................................................................PAGE 06
8. TAMPERS.........................................................................................................................................................PAGE 06
9. SET OF MICROFIBRE CLOTHS.........................................................................................................................PAGE 06
OPTIONAL ACCESSORIES ......................................................................................................................PAGE 07
ROUTINE MAINTENANCE ......................................................................................................................PAGE 08
SOMETHING DOESN’T WORK?..............................................................................................................PAGE 09
WARRANTY AND SAFETY, ASSISTANCE SERVICE ................................................................................PAGE 10
WARNING: DO NOT USE THE DEVICE WITHOUT READING THE MANUAL.
INTRODUCTION
CONGRATULATIONS FOR CHOOSING THIS MADE IN ITALY PRODUCT.
THIS MACHINE IS THE RESULT OF PAINSTAKING RESEARCH BY REAL CLEAN ENTHUSIASTS AND INNOVATION, IT
REPRESENTS THE LAST FRONTIER OF NEW-GENERATION MULTIFUNCTIONAL DEVICES.
THANKS TO ITS SMALL FOOTPRINT, IT IS EASY TO MANOEUVRE AND CAN BE STORED ANYWHERE.
PLEASE READ THIS MANUAL CAREFULLY, TO GET TO KNOW THE PRODUCT MORE CLOSELY AND TO DISCOVER ITS
FULL POTENTIAL.
WE RECOMMEND THAT YOU SCRUPULOUSLY FOLLOW THE ADVICE AND PRECAUTIONS FOR USE IN ORDER TO
GUARANTEE EXCELLENT RESULTS AND SAFETY.

1
2
3
4 5
2
DESCRIPTION OF THE MACHINE
1. Socket for hose coupling
2. Additional steam control knob
3. Control panel
4. Water tank cap
5. Cable reels

FIG.
FIG.
AB
C
3
1
2
STEP 1: FILLING THE WATER TANK
• Remove the cap (fig. 1)
• Fill the tank with water, respecting the maximum capacity
of the tank (approx. 2 L) DO NOT USE DISTILLED WATER,
PERFUMES, ESSENCES, DESCALERS OR ANY OTHER
SUBSTANCE other than clean water.
• Replace the cap
STEP 2: START
• Connect the power cable to a 220-volt outlet equipped
with a grounded plug, two red lights will appear on the
‘C’ display immediately after the initial beep.
• Steam: press button ‘A’, the display will flash ‘HEAT’ to
indicate the heating phase. After about 5 minutes, the
device will reach optimum working pressure and the
display will show the temperature. If you do not use the
machine for 15 minutes, it will go into stand-by mode,
the display will show the message ‘StbY’, to reactivate
it simply dispense steam; after a further 90 minutes of
inactivity the machine will switch off and to use it you
must switch it on by pressing key ‘A’. When the water in
the tank runs out, steam delivery stops and the display
shows ‘H2O’, in which case switch the machine off and
disconnect the power cable, put about 2 litres of water in
the tank, reconnect the cable and switch the machine on
again. Steam should be adjusted according to the surface
to be treated (see STEP 4), do not use steam on velvet,
satin and leather.
• Iron (Optional): after activating the steam function,
connect the iron plug to the machine (see STEP 3):
CONNECTING THE FLEXIBLE HOSE), the display will show
the message “Iron”, press button “B” to choose 2 pre-
set working pressures (P-1, P-2); adjust the temperature
of the iron by positioning the knob on the steam zone,
before dispensing steam wait for the light signal on the
iron indicating that the soleplate is heating up.
MACHINE OPERATIONS
WARNING: DO NOT USE STEAM OR WATER JETS
ON LIVE OR RUNNING ELECTRICAL EQUIPMENT!