Maxkon BBQ Series User manual

Assembly Instructions
Square Metal Fire pit JS-FT039-4
Part List
Part List
Description
Qty.
Drawings
A
Top Frame
4
B
Leg
4
C
Frame Support Part
4
D
Log Grate
1
E
Fire Bowl
1
F
Mesh Lid
1
G
Lid Ring
1
H
Bolt
36
I
Poker
1
J
Allen Wrench
1
K
Nut
1
L
Ice Bowl
1
M
BBQ Grill
1
N
Pancake Turner
1
O
Tong
1
Tool required: Allen Wrench (provided)
Special Warnings
➢Check local bylaws before using the fire pit.
➢This fire pit is intended for Outdoor Use Only! DO NOT use on wooden decks.
➢This fire pit is intended to Burn Wood Logs Only! DO NOT burn coal, leaves or other combustible
materials in the fire pit.
➢NOT for use by children. Keep children and pets away from the fire pit.
➢Fire pit is hot, use with caution. NEVER touch hot fire pit with bare hands.
➢NEVER leave burning fire pit unattended and always extinguish fire completely before leaving the fire pit.
➢Maintain a minimum of 5 FT from any structure!
➢DO NOT use near flammable or combustible objects or materials.

➢Only CHROMED PLATED COOKING GRID(un provided) is intended for cooking.LOG GRATE is
NOT intended for cooking and SHOULD NOT be used for this purpose.
Operation Instructions
➢Place wood logs on grate and light with match. DO NOT overload logs.
➢Please use Poker (provided) when handling.
➢We do not recommend pouring water over the fire unless necessary. The fire should be allowed to
expire on its own.
➢Tile is fragile so handle with care.
Care and Maintenance
This fire pit is a quality-built product and is made to last for many years.
The frame structure of this unit is made of powder-coated steel extrusion and should resist rusting under
normal use. Should rusting occur, we suggest using a steel brush on the affected area followed by a
spray coating of high temperature anti-rust paint.
For additional rust proofing of the bowl, grate and mesh lid we recommend that a coat of high
temperature primer (such as rustoleum or similar brand) is applied before use.
You may cover the fire pit with a Protective Cover (un provided) when the fire pit is not in use. Ensure
the fire pit has completely cooled down before using the Protective Cover.
Assembly Instructions
Estimated Assembly Time: 20 Minutes
DO NOT over tighten hardware!
Step 1: Place parts on a smooth even surface, Fix 4 pieces Top
Frame (A) by using Bolt (H) into Square frame. （View Fig.1）
Step 2:Attach Legs (B) to Top Frame (A) with Bolts (H)
Hand tighten!(View Fig.2).
.
Step 3: Attach Frame Support Parts (C) to Legs (B) by using Bolts
(H). Tighten all hardware accordingly with an Allen Wrench (J)
(provided) and adjustable wrench until all pieces fit together
securely. Turn the assembled fire pit frame over so that it sits
securely (legs down) on a flat surface. (View Fig. 3)

Step 4: Place Fire Bowl (E) in the center of Top Frame (A)
and put Log Grate (D) in the Fire bowl (E).Mount Lid Ring (G)
on the Mesh Lid (F) by Bolt (K), then place the assembled
Mesh Lid over the Fire bowl (E). (View Fig.4)
Your FIRE PIT is ready for use!
Step 5:For BBQ,
Put the BBQ Grill (K) on the assembled firepit base for cooking.
For Ice cooler
Put the Ice Bowl (L) into the assembled firepit base for cooler