MaxLux МХ0029 User manual

 
maxluxitalia.com | [phone] � U
  
MX 0029
INTRODUCTION
FEATURES
MX0029 è uno Splitter 1x4 che consente ad una sorgente HDMI di essere visualizzata come singola immagine su 4
displays. Potendo essere connesso in cascata, la stessa immagine può essere visualizzata su 6 displays anziche 4 e
con il vantaggio aggiuntivo della Correzione Bezel per un allineamento ottimale dell'immagine.
• HDMI, HDCP1.4 and DVI compliant
• Output source signal to 4 displays (2 by 2 Video wall) as a full image
with adjustable Bezel Correction
• Cascade/Bypass the HDMI signal up to as many as require
• One button push to control all connected TV Wall devices
• Supports RS232 and Telnet controls
• Input resolutions support VGA~WUXGA and 480i~1080p
• Output resolutions support 720p~1080p
• Supports different input resolution and output resolution selectable
from TV Wall application. The factory default value for the output
resolution is 720p@60Hz/ 2CH LPCM
•Audio supports LPCM 2CH, 5.1CH, 7.1CH/AC3/DTS/Dolby Digital
Plus/Dolby TruHD & DTS-HD
1x4 HDMI TV Wall Splitter

 
 |   
  
MX 0029
OPERATION CONTROLS AND FUNCTIONS
Front Panel
POWER
1
1Power
▪ON/OFF: Press this button to power ON the device or set it to
standby mode.
▪Factory default: Under Power On status, press this button for 3
sec. to reset the system back to factory default setting.
Rear Panel
CD AB RS232 DC 12V
USB
SERVICE
ONLY
HDMI IN HDMI OUT
CONTROL
1 2 3 4 5 6
1HDMI IN
Connect with HDMI source equipment such as DVD/Blue-ray
players and or PC/Laptop devices.
2HDMI OUT A~D
Connect with HDMI TV/displays for output image display. It is
suggest that the connection sequence should be placed as
diagram showed for TV wall set up. Output D is the nominated port
for cascading/Bypass the HDMI signal.
DVD HDMI IN
Control
HDMI OUT Display
2X2
DCBA
PC A B
C D

 
maxluxitalia.com | [phone] �  U 
  
MX 0029
DVD HDMI IN
HDMI IN
Control
Control
HDMI OUT
HDMI OUT
Display
3X2
DCBA
HGFE
PC
Router
A B C
EF G
DVD HDMI IN
HDMI IN
HDMI IN
Control
Control
Control
HDMI OUT
HDMI OUT
HDMI OUT
Display
3X3
DCBA
HGFE
LKJI
PC
Router
A B C
EF G
IJ K
3Control
Connect to an active network for telnet control (Please refer to 6.5
telnet Commands).
4USB SERVICE ONLY
This slot is reserved for factory use only.
5RS-232
Connect from PC/Laptop with D-Sub 9pin cables for RS-232
command sending and controlling over the device.
Note: RS-232 control system is only limited for single device.
6DC 12V
Plug the 12V DC power supply into the unit and connect the
adaptor to an AC outlet.

SPECIFICATIONS
Video Bandwidth
Input ports
Output ports
HDMI Cable Distance
Sampling Rate
ESD Protection
Power Supply
Dimensions (mm)
Weight (g)
Chassis Material
Silkscreen Color
Operating Temperature
Storage Temperature
Relative Humidity
Power Consumption
225MHz/6.75Gbps
1x HDMI (Female type)
1xUSB (Service only)
4 x HDMI (Female type)
15M/8-bit 1080p
192kHz
Human body model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
12V/3A DC (US/EU standards, CE/FCC/
UL certied)
436(W) x 249(D) x 44(H)/Jacks Excluded
436(W) x 256(D) x 49(H)/Jacks Included
2815
Aluminum
Black
0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
-20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
20~90% RH (non-condensing)
12.3w
CONNECTION AND INSTALLATION
A
CD AB RS232 DC 12V
USB
SERVICE
ONLY
HDMI IN HDMI OUT
CONTROL
PC/NB
TV/Monitor
DVD/Blu-ray Player 2x2 TV Wall