Mayline Medina Series User manual

Medina Series
Curved Desk
CALL 1-800-822-8037 FOR ASSISTANCE
ASSEM LY INSTRUCTIONS
Model No. MND63/72
P/N MNDT REV 3 02/27/15 www.mayline.com
TM
PARTS LIST
Name Part Qty.
Spare
Qty
A
Spare
Qty
Qty.
PartName
HARDWARE
MNCNZHB
1
9 1
B4 1
C 9 1
D51
5
E
H
H
H
H
H
Cam Lock
REALS001
Cam Post
REALS003
Cam Sticker
REALS102**
Cam Sticker/Silver
ase Stand-off
REALS102SLV
REALS414
NOTE:
① . 1 Top and 1 Modesty Panel packed in one carton - MNDT63/MNDT72.
② . 2 Legs with Hardware packed in one carton - MND .
**Denotes Color Code
Items with H are in hardware box.

11 H2
G
Qty.
PartName Name Part Qty.
PARTS LIST
MNDT~~**
TOP
MNDB**
Right B se Leg
11 K
H1
MNDB**
Left B se Leg
MNDTK~~**
Modesty P nel
2 3
1 Insert Cams (A) into the Modesty Panel (K) and ase Legs (H1 & H2). Install Cam Posts
(C) into threaded inserts in ase Legs (H1 & H2). Attach Modesty Panel (K) to ase Legs
(H1 & H2) by turning Cams (A). Apply Cam Sticker/Silver (D) onto Cams (A) of Modesty
Panel (K).
NOTE: The arrow on the face of the Cam (A) should
point towards the Cam Post (C) for proper alignment.
H1
H2
K
A
D
D
C
A
H2
K
IMPORTANT!
Review ALL instructions before beginning assembly. These
instructions are provided to avoid problems that may occur from
improper assembly or installation. Mayline and/or its distributor
are not responsible for failure resulting from improper assembly
or installation of this product. Moreover, all warranties are void
for failure to follow these assembly instructions.
**Denotes Color Code
~~Denotes Size - 63/72
4
REALS425
Qty.
Part
Replacement #

ATTENTION: Due to the floating design of the Medina desk,
care must be taken when moving the unit. Lift the desk by
its base and avoid pushing the desk
45
Install ase Stand-off (E) into threaded inserts in underside of Top (G). 2
3
Place Top (G) onto base and lock in place by turning Cams (A). Apply Cam Stickers ( )
onto Cams (A) of ase Legs (H1 & H2). Apply Cam Sticker/Silver (D) onto Cams (A) of
Modesty Panel (K).
NOTE: The arrow on the face of the Cam (A) should
point towards the ase Stand-off (E) for proper alignment.
G
C
E
G
H1
K
B
A
D
E
A
B
H1 & H2
G