Mayline Medina MNRR User manual

PARTS LIST
1
Name Part Qty.
Spare
Qty
Spare
Qty
Qty.
PartName
A12
HB
Wood Dowel
REALS004
MNRRHB
B1 9
HB
Cam Post
REALS003
C 15
HB
D 24
HB
Cam Sticker
REALS102**
E4
ntg Bracket
REALS088
G2
HB
ntg Clip
REALS136
H2
HB
ntg Plate
REALS406
I4
HB
Cam Lock
REALS001
1
1
HARDWARE
J8
6 x 15mm Black
REALS129
HB
CALL 1-800-822-8037 FOR ASSISTANCE
ASSE BLY INSTRUCTIONS
odel No. NRR
P/N MNRR REV 1 02/27/15 www.mayline.com
edina Series
Reception Return
T
HB
F 28
HB
1
Ø4 x 20mm Black
REALS267
Leveler
REALS429
1
Items with HB are in hardware box.
**Denotes Color Code

3
1
Install Cam Posts (B) into End Panel ( ). Insert Cams (C) to inside of the Front Panel(L).
Insert Cams (C) in the underside of the Top (K). Install Levelers (I) into threaded inserts in
underside of End Panel ( ) and Front Panel(L).
2
PARTS LIST
Name Part Qty. Qty. PartName
Top
MNRRT**
K1
L 1
End Panel
MNRRTM**
M1
Front Panel
MNRRP**
NOTE:The End Panel can be
exchangeable for left and right.
IMPORTANT!
Review ALL instructions before beginning assembly. These
instructions are provided to avoid problems that may occur from
improper assembly or installation. ayline and/or its distributor
are not responsible for failure resulting from improper assembly
or installation of this product. oreover, all warranties are void
for failure to follow these assembly instructions.
NOTE:
① .
Reception Return Top & End Panel
packed in one carton -
MNRRT
② .
Reception Front Panel
with Hardware packed in one carton -
MNRRP
**Denotes Color Code

45
2
Attach Top (K) and Front Panel (L) by turning Cams (C). Apply Cam Stickers (D) to Cams
(C) of Top (K) and Front Panel (L).
4
Attach ntg Bracket (E) to the Top (K) and End Panel ( ) & Front Panel (L) using Screws
(F).
NOTE: The arrow on the face of the Cam (C) should
point towards the Cam Post (B) for proper alignment.
3
Attach Top (K) and Front Panel (L) and End Panel ( ) by turning Cams (C). Apply Cam
Stickers (D) to Cams (C) of Top (K) and Front Panel (L) End Panel ( ).
5
Finished the assembly of the Reception Return.
NOTE: The arrow on the face of the Cam (C) should
point towards the Cam Post (B) for proper alignment.
NOTE: The arrow on the face of the Cam (C) should
point towards the Cam Post (B) for proper alignment.
NOTE: End Panel is in Left.

67
6
Attach ntg Clip (G) to the Reception and Reception Return using Screws (J).
Attach ntg Plate (H) to the Reception and Reception Return using Screws (F).
NOTE: End Panel is in Right.
NOTE: Reception Return is in Left.
NOTE: Reception Return is in Right.