Mayline realoffice Aberdeen Series User manual

3
1
1
1
Qty.
PartName
PARTS LIST
Qty.
PartName
2
1
1 2
1
M
L*
Q
N
P
R
S
T*
*
PARTS LIST
Top
AH~~L**
Shelf
AH~~M**
Left Side Panel
AHN**
Right Side Panel
AHP**
Upper Back Panel
AH~~Q**
Lower Back Panel
AH~~R**
Center Divider
AHS**
Right Side Door
AHW~~T**
Left Side Doors
AHW~~ **
2
*Available in Cherry (LCR) or Mocha (LDC) finish only.
**Denotes Color Code
~~Denotes Size (72, 66, 60)
1
1111
Install Cam Posts (B) into Shelf (M). Insert Wood Dowels (A) into top of
the Back Panel (R). Insert Cams (C) into the of the back side of Back Panel
(R). Slide Back Panels ( Q) into groove in Shelf (M).
Install Cam Posts (B) into threaded inserts in Side Panels (N, P). Insert
Wood Dowels (A) and Cams (C) into the end of the Shelf (M) and Back
Panel (R). Slide Side Panels (N, P) into position with Back Panels (R, Q)
inserting into the groove in the Side Panels (N, P). Fasten Side Panels (N,
P) and Shelf (M) by turning Cams (C).
2
A
D

5
4
4
Install Cam Posts (B) into threaded inserts in the Top (L). Insert Wood
Dowels (A) and Cams (C) into top of the End Panels (N, P) and Center
Divider (S). Place Top (L) onto base and fasten by turning Cams (C). Place
Cam Stickers (D) onto Cams (C).
3
Stand unit in upright position. Install Cam Posts (B) into Shelf (M). Insert
Dowels (A) and Cam (C) into the Center Divider (S). Fasten Center Divider
(S) to Shelf (M) by turning Cams (C).
J
G
C
D

T
L
P
N
M
S
7
T
T
L
P
N
M
S
7
Install Doors (U, T) into cabinet. Insert Grommets (F) into Shelf (M) and
Back Panel (R).
Adjust door alignment as necessary by using the adjustment screws on the
hinges. DO NOT use Power Driver to make these adjustments.
6
Position hutch as desired.
Attach Plate (G) using Screws (E) to cabinet body and desk top.
5
6

8 9
Pre-Installed Replacement
Parts List
Part Included
Qty. Part Included Qty.
REALS051P
Hinge Plate -
Outer Door
REALS051
Hinge
REALS013P
Hinge Plate -
Inner Door
8
4
4
32
REALS016