Mayline Ranger Team Table User manual

NOTE: Please count and inspect all pieces before disposing of any carton or packing materials.
ASSEMBLY INSTRUCTIONS
TEAM TABLE
COMPONENTS:
REF. # QTY. DESCRIPTION PART No.
1 3 END ASSEMBLY CALL**
2 2 UPPER RAIL CALL**
3 1 UPPER RAIL LEFT CALL**
4 1 UPPER RAIL RIGHT CALL**
5 1 FOOT RAIL CALL**
6 1 TOP CALL~~*
HARDWARE BAG PART No A8172:
REF. # QTY. DESCRIPTION PART No.
E1 17 1/4-28 x 3/8 X156*
MACHINE SCREW
E2 17 1/4-28 KEPS NUT T25*
E3 30 10 x 3/4 SCREW X11*
(1)
* Individual Items, Order by part number.
** Denotes Color Code
~~Denotes Size
When ordering components, specific color and/or size information may be required.
Contact a Mayline Customer Service Representative. 1-800-822-8037

1. Assemble the two End Assemblies (1) to the two Upper Rails (2) with two
Screws (E1) and two Nuts (E2) per leg as shown. DO NOT tighten screws at this
time.
2. Assemble the Foot Rail (5) to the end assemblies with two Screws (E1) and
two Nuts (E2) per leg as shown.
3. Tighten all Screws.
(2)
4. Assemble End Assembly (1) to the Left Upper Rail (3) & the Right Upper Rail (4)
with two Screws (E1) and two Nuts (E2) per leg as shown.

(3)
5. Place Top (6) face down on a clean flat surface.
6. Line up all pilot holes and assemble Frame Assemblies to Top using Screws (E3) as shown.
7. Turn assembled table to an upright position. MAYLINE recommends that two people perform this task.