Mayline Medina Series Straight Desk User manual

Medina Series
Straight Desk
CALL 1-800-822-8037 FOR ASSISTANC
ASS MBLY INSTRUCTIONS
Model No. MNDTS63/72
P/N MNDS R V 1 02/27/15 www.mayline.com
TM
PARTS LIST
Name Part Qty.
Spare
Qty
A
Spare
Qty
Qty.
PartName
HARDWAR
MNCNZHB
1
9 1
B4 1
C 9 1
D51
5
E
HB
HB
HB
HB
HB
Cam Lock
REALS001
Cam Post
REALS003
Cam Sticker
REALS102**
Cam Sticker/Silver
Base Stand-off
REALS102SLV
REALS414
NOT :
① . 1 Top and 1 Modesty Panel with Hardware packed in one carton
- MNDTS63 / MNDTS72.
② . 2 Legs packed in one carton - MNDS.
**Denotes Color Code
Items with HB are in hardware box.

11 H
F
Qty.
PartName Name Part Qty.
PARTS LIST
MNDTS~~**
TOP
MNDS**
Ri ht Base Le
11 I
G
MNDS**
Left Base Le
MNDTSI~~**
Modesty Panel
2 3
1 Insert Cams (A) into the Modesty Panel (I) . Install Cam Posts (C) into threaded inserts in
Base Legs (G & H). Attach Modesty Panel (I) to Base Legs (G & H) by turning Cams (A).
Apply Cam Stickers/Silver (D) to Cams (A) of Modesty Panel (I).
NOT : The arrow on the face of the Cam (A) should
point towards the Cam Post (C) for proper alignment.
IMPORTANT!
Review ALL instructions before beginning assembly. These
instructions are provided to avoid problems that may occur from
improper assembly or installation. Mayline and/or its distributor
are not responsible for failure resulting from improper assembly
or installation of this product. Moreover, all warranties are void
for failure to follow these assembly instructions.
G
H
A
I
D
D
**Denotes Color Code
~~Denotes Size - 63/72
4
REALS425
Qty.
Part
Replacement #

ATT NTION: Due to the floating design of the Medina desk,
care must be taken when moving the unit. Lift the desk by
its base and avoid pushing the desk
45
Install Base Stand-off ( ) into threaded inserts in underside of Top (F). 2
3
Insert Cams (A) into the Modesty Panel (I) and Base Legs (G & H).Place Top (F) onto base
and lock in place by turning Cams (A). Apply Cam Stickers ( B ) onto Cams (A) of Base Legs
(G & H). Apply Cam Sticker/Silver (D) to Cams (A) of Modesty Panel (I).
NOT : The arrow on the face of the Cam (A) should
point towards the Base Stand-off ( ) for proper alignment.
F
C
E
B
A
F
A
B
D
I
G
H
E
A
B
G & H
F