Mayline Medina MNC12 User manual

PARTS LIST
1
CALL 1-800-822-8037 FOR ASSISTANCE
ASSEMBLY INSTRUCTIONS
P/N MNC12/14 REV 1 02/27/15 www.mayline.com
12' / 14' Con erence Table
Medina Series
TM
Name Part Qty.
Spare
Qty
A
Spare
Qty
Qty.
PartName
HARDWARE
B14
C
2
F
HB
HB
HB
HB
Cam Lock
REALS001
Cam Post
REALS003
11
16 1
16 1
Cam Sticker/Silver
Model No. MNC12/14
REALS102SLV
1D
REALS036
Mntg Plate
8E
HB
1
REALS043
M6x15mm
Cam Sticker
REALS102**
**Denotes Color Code
Items with HB are in hardware box.
MNCT120HB

2
Qty.
PartName
PARTS LIST
Name Part Qty.
2
2
G
H
3
4
I
Top
MNMT~~ST**
Leg
MNCB**
Modesty Panel
1 Insert Cams (A) into the Modesty Panels (I) and MNCB Leg (H) and Center Leg (J). Install
Cam Posts (C) into threaded inserts in MNCB Leg (H) and Center Leg (J). Attach Modesty
Panels (I) to MNCB Leg (H) and Center Leg (J) by turning Cams (A). Apply Cam
Stickers/Silver (B) to Cams (A) o Modesty Panels (I).
NOTE: The arrow on the ace o the Cam (A) should
point towards the Cam Post (C) or proper alignment.
NOTE:
① . 12' Con erence Table 1/2 Top & Modesty Panel with Hardware packed in
one carton -
MNMT72ST
② . 14' Con erence Table 1/2 Top & Modesty Panel with Hardware packed in
one carton -
MNMT84ST
③ . Center Leg 12'/14' Con erence Tables packed in one carton -
MNMTSL
④ . 2 Legs with Hardware packed in one carton -
MNCB
1
J
Center Leg
MNMTSL**
C
A
J
I
H
J
I
I
C
A
B
A
C
MNMT~~STI**
IMPORTANT!
Review ALL instructions before beginning assembly. These
instructions are provided to avoid problems that may occur rom
improper assembly or installation. Mayline and/or its distributor
are not responsible or ailure resulting rom improper assembly
or installation o this product. Moreover, all warranties are void
or ailure to ollow these assembly instructions.
**Denotes Color Code
~~Denotes Size - 72/84

45
Follow the Step ① to install the other MNCB Leg (H) and the other Modesty Panels (I).
2 3 Attach Mntg Plates (D) to the underside o adjacent Top (G) using Screws (E). Install Cam Posts
(C) into threaded inserts in underside o Top (G).
NOTE: The arrow on the ace o the Cam (A) should
point towards the Cam Post (C) or proper alignment.
C
A
J
H
D
C
E
G
4
Place Top (G) onto Legs (H & J) and Modesty Panels (I) and lock in place by turning Cams (A).
Apply MNCB Cam Stickers onto Cams (A) o Leg (H). Apply Cam Stickers/Silver (B) to Cams (A)
o Modesty Panel (I). Insert Grommets into Top holes.
B
G
H
J
I
I
H
I
I
I
I
J
H
H
I
I
B

6
5
Follow the Step ④ to install the other Top (G) and the other MNCB Leg (H) and the other
Modesty Panels (I). Attach the Top to the other Top using Screws (E).
NOTE: The arrow on the ace o the Cam (A) should
point towards the Cam Post (C) or proper alignment.
B
I
I
G
H
E
C
A
G
H
MNCB
Cam Sticker
7
ATTENTION: Due to the loating design o the Medina Con erence
Table, care must be taken when moving the unit. Li t the desk by its
base and avoid pushing the Con erence Table.
12' Con erence Table
14' Con erence Table