Mayline Medina Series User manual

PARTS LIST
1
Name Part Qty.
Spare
Qty
A
B
Spare
Qty
Qty.
PartName
D
F
E
C
G
8
8
8
1
1
1
8 1 2
Wood Dowel
1
2
H4 1
REALS004
HB
HB
HB
HB
HB
HB
HB
Cam
REALS001
Cam Post
REALS002
Cam Sticker
REALS102**
Door Stop
REALS025
3.5 x 16mm White
REALS017
HB
REALS009
Shelf Support
I
MGDCHB
8 1
REALS146
3x19mm Black
HB
20 1
1
J
CALL 1-800-822-8037 FOR ASSISTANCE
ASSEMBLY INSTRUCTIONS
Model No. MGDC
P/N MGDC REV 1 02/27/15 www.mayline.com
Medina Series
Glass Door Cabinet
TM
Handle and Screw
2
K
HARDWARE
REALS428
Foam Tape 15mm
REALS410
Handle-Silver
96mm Center
Handle Screw
M4x35mm White
**Denotes Color Code
Items with HB are in hardware box.

Qty.
PartName
PARTS LIST
Name Part Qty.
L1
1
1
1
1
2
1
1
Top
Left Side Panel
Right Side Panel
Bottom Panel
Back Panel
Shelf Panel
Right Door
Left Door
2 3
1
Insert Wood Dowels (A) into Bottom Panel (O). Install Cam Posts (C) into Side Panels (M
& N). Insert Cams (B) in the underside of the Bottom Panel (O). Attach Side Panels (M &
N) and Bottom Panel (O) by turning Cams (B). Adhere Cam Stickers (D) to Cams(B).
Adhere the Single side Tape (K) to the bottom of the Side Panels (M & N).
NOTE: The arrow on the face of the Cam (B) should
point towards the Cam Post (C) for proper alignment.
Q
M
RN
SO
P
IMPORTANT!
Review ALL instructions before beginning assembly. These
instructions are provided to avoid problems that may occur from
improper assembly or installation. Mayline and/or its distributor
are not responsible for failure resulting from improper assembly
or installation of this product. Moreover, all warranties are void
for failure to follow these assembly instructions.
**Denotes Color Code

45
2
Insert Wood Dowels (A) into Side Panels (M & N). Insert Cam (B) into Side Panel (M & N).
Install Cam Posts (C) to underside of Top (L). Attach Top (L) to assembled cabinet by
turning Cams (B). Apply Cam Stickers (D) to Cams (B) of Side Panel (M & N). Attach Door
Stop (E) to underside of Top (L) using Screws (F).
3
Attach the Back Panel (P) to the Top (L) , Side Panels (M & N) and the Bottom Panel (O)
by using Screws (J).

67
Pre-Installed Replacement
Parts List
4
Insert Shelf Supports (K) into the Side Panels (P & Q) at the desired height. Put the Shelf
Panel (S) on the Shelf Supports (K). Cover Levelers (E) access holes with Cam Caps (M)
in Bottom Panel (T).
Attach Handles (G) to Glass Doors (R & S) using Screws (H). Install Glass Doors (R & S)
onto Cabinet. Adjust doors for alignment as necessary by using the adjustment screws on
the hinges.
Att ntion:
scr w "H" should only
b install d as th final
st p,aft r all ass mbli s
and adjustm ntsar
compl t
L
M
O
Q
Q
R
Part Included
Qty. Part Included Qty.
4X14mm White
REALS417
4
4
16
REALS418
REALS418P