Mazda 2007 6 Sports Sedan User manual

Before Use
Getting
started
Routing
Address
Book
Navigation
Set Up
Voice
Recognition
If
necessary
Preparation
NAVIGATION
SYSTEM
See page for specific information.
See page for specific information.
See page for specific information.
Immediate use
Advanced use
See page for specific information.
If necessary
5
4
4
5
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

2
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Accessories
Please contact an Authorized Mazda Dealer if you are missing the
following accessory.
lMap Disc
CAUTION:
THIS PRODUCT IS A CLASS I LASER PRODUCT.
HOWEVER THIS PRODUCT USES A VISIBLE/
INVISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THIS PRODUCT
CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Laser products:
Wave length: 650 nm
Laser power: No hazardous radiation is emitted with safety protection.
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

3
Before Use If
necessary
Rear View Monitor
MEMO
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

4
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Contents
Preparation
nBefore Use
Accessories........................................................................................ 2
Laser products: .................................................................................. 2
Contents............................................................................................. 4
Safety Information .............................................................................. 6
Introduction ........................................................................................ 8
(Use This Product Safety), (Navigation System), (Screens)
Names and Functions ...................................................................... 10
Immediate use
nGetting started
lActivation....................................................................................... 12
(Removing the Map Disc), (Buttons on the screen)
lScreen Names and Functions....................................................... 14
(Screens Before Setting Route), (Screens During Route Guidance),
(Menu), (Screen adjustments and settings)
lScreen change .............................................................................. 16
(Changing the Map Orientation/Scale)
nRouting
lDestination Entry and Route Search............................................. 18
(Change (Change Search Area)), (Address), (Point of interest),
(Emergency), (Memory Point), (Home), (Preset Destination),
(Previous Destination), (Intersection), (Freeway On/Off Ramp),
(Coordinates), (Select from map)
lQuick POI...................................................................................... 26
(Displaying POI(s) on a Map), (Local Search), (Deleting POI Markers),
(Showing POI Data)
lCharacter Entry............................................................................. 27
(To enter the street name, city name, and other.),
(To enter the house phone number, and other.)
lDirect Destination Input................................................................. 28
(Direct Destination Input), (Selecting Route)
lPOI Icons on Maps / Delete Destination ....................................... 29
(POI (Point of Interest) Icons), (Delete destination)
lRoute Options ............................................................................... 30
(Route Preferences), (Modification of Destination or Way Point Positions),
(Deletion of Destination or Way Points), (Detour), (Turn List),
(Display Preview), (Route Preview)
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

5
Before Use If
necessary
Rear View Monitor
Advanced use
nAddress Book
lAddress Book ................................................................................ 34
(Memory Point Storage), (Memory Point Confirmation and Modification),
(Preset Destinations or Home storage), (Memory Point Deletion), (All Memory
Point Deletion), (Displays Icons at Memory Points), (Avoid Area Storage),
(Avoid Area Confirmation and Modification), (Avoid Area Deletion),
(All Avoid Area Deletion), (Category Name Modification), (Previous
Destination Deletion), (All Preset Destination Deletion)
nVoice Recognition
lVoice Recognition.......................................................................... 38
(Voice Recognition Structure), (Select the Language),
(Basic Usage Pattern), (Cancel Voice Recognition), (Voice Recognition
Command)
nNavigation Set Up
lVolume Adjustment........................................................................ 40
lNavigation Set Up.......................................................................... 42
(User Setting), (Quick POI Selection), (Calibration), (Restore System
Defaults), (Language), (Map Configuration)
If necessary
nIf necessary
lPrecautions/System Performance ................................................. 51
(Voice Guidance), (GPS), (Map Matching), (Positioning Accuracy),
(Route Guide), (Route Search)
lTroubleshooting ............................................................................. 55
(Verification First), (Error Messages)
lMaintenance.................................................................................. 58
(Care of the Product), (Handling and Care of Map Discs)
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

6
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Safety Information
nRead this owner’s manual for your Navigation System carefully before using the system.
It contains instructions about how to use the system in a safe and effective manner.
Mazda assumes no responsibility for any problems resulting from failure to observe the instructions
given in this manual.
nThis manual uses pictographs to show you how to use the product safely and to alert you to potential
dangers resulting from improper connections and operation. The meanings of the pictographs are
explained below. It is important that you fully understand the pictographs and explanations in order to
use this manual and the system properly.
Warning
Warning
The presence of this Warning symbol in the text is intended to
alert you to the importance of heeding the operation
instructions. Failure to heed the instructions may result in
severe injury or death.
nDo not keep your eyes fixed on the monitor screen or operate the system
while driving.
Do not change the settings and destination locations while driving. Minimize the time
spent on viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and can
cause accidents. Always stop the vehicle in a safe location and use the parking brake
before operating the system.
nAlways obey local traffic regulations.
Your guided route may include roads that are not open to vehicles or are closed due to
traffic regulations. Comply with the local traffic regulations and take another route.
nDo not use the unit when it is out of order.
If the unit is out of order (no image, no sound) or in an abnormal state (has foreign matter
in it, is exposed to water, is smoking, or smells), then turn it off immediately and consult
with an Expert dealer, we recommend an Authorized Mazda Dealer. Using the unit in an
out-of-order condition may lead to accidents, fires, or electric shocks.
nUse the proper power supply.
This product is designed for operation with a negative grounded 12 V DC battery system.
nDo not disassemble.
Do not disassemble the product or attempt to repair it yourself. If the product needs to be
repaired, take it to an Expert dealer, we recommend an Authorized Mazda Dealer.
Warnings
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

7
Before Use If
necessary
Rear View Monitor
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Caution
Caution
The presence of this Caution symbol in the text is intended to
alert you to the importance of heeding the operation
instructions. Failure to heed the instructions may result in injury
or material damage.
nDo not use the product where it is exposed to water, moisture, or dust.
Exposure to water, moisture, or dust may lead to smoke, fire, or other damage to the unit.
Make especially sure that the unit does not get wet in car washes or on rainy days.
nKeep the voice guidance volume at an appropriate level.
Keep the volume level low enough to be aware of road and traffic conditions while driving.
nProtect the Deck Mechanism.
Do not insert any foreign objects into the slot of this unit.
nThis navigation system is designed exclusively for use in automobiles.
This navigation system should only be installed in an automobile. Do not install it in a
ship, aircraft, or any other vehicles except an automobile. Do not use it detached from the
vehicle.
nDo not insert or allow your hand or fingers to be caught in the unit.
To prevent injury, do not get your hand or fingers caught in moving parts or in the disc
slot. Especially watch out for infants.
Cautions
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

8
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Introduction
nExtremely low or high temperatures may interfere with normal operation
The inside of the vehicle can become very hot or cold when it is parked for extended
periods in direct sunlight or in cold places with the engine turned off. The navigation system
may not operate normally under such circumstances. Turn off the navigation system until
the inside of the vehicle has cooled down or warmed up. If the system does not operate
thereafter, consult an Authorized Dealer, we recommend an Authorized Mazda Dealer.
This navigation system utilizes GPS* satellite signals, a speed sensor and gyrosensor to track
and display your vehicle’s current position, and to guide you from your starting point to your
destination along a calculated route.
* : GPS (Global Positioning System) is a position detecting system utilizing the signals from GPS satellites
deployed by the U.S. Defense Department.
Screens displayed in this manual may differ from those on the actual display.
Use This Product Safety
Navigation System
Screens
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

9
Before Use If
necessary
Rear View Monitor
MEMO
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

10
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Names and Functions
lTo remove the remote control from the cradle press
lWhen placing the remote control back in the cradle, press it until you hear it engage.
PUSH
Joystick
lSelects items
by tilting it up, down, right, and left.
lScrolls map.
ZOOM key
Changes the map scale.
( page 16)
RET key
Returns to the previous screen.
VOICE key
lInitiates vocal guidance for route
manoeuvres.
lAdjusts screen quality.
( page 15)
P
D
E
l
l
M
S
(
Infrared transmitter
VOICE
POS
ENTER
MENU
ENTER
ZOOM
RET
T
U
r
e
TALK
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

11
Before Use If
necessary
Rear View Monitor
t
engage.
Note
Match the polarity of the batteries
with the and marks in the
battery case.
l
Battery: Two AA batteries (R6PU)
lBattery life: Approximately 5
months of normal use (when
using manganese batteries at
ambient temperatures)
lBattery replacement: Replace
the batteries as soon as possible
when the infrared receiver does
not respond properly to remote
control operations, or when the
remote control does not work.
Note
Make sure that there is not any
pressure applied to any of the
remote control buttons when
placing the remote control in the
console box. Pressure on any of
the buttons will drain the batteries.
Battery Inserting
ÀOpen the
battery
compartment
cover.
ÁInsert the
new
batteries.
ÂClose the
battery
compartment
cover.
POS (Position) key
Displays your current position.
ENTER key
lExecutes a selected item.
lDisplays pop up menu.
MENU key
Select a menu.
( page 15)
d transmitter
POS
ENTER
MENU
TALK Switch
Use for switching to voice
recognition or canceling.
TALK
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

12
Routing Address
Book Getting started
Activation
Insert the map disc into the unit to start the Mobile Navigation System.
Note
lThe map disc cannot be inserted or ejected while the ignition switch is in the OFF position.
lRemember that the battery can run down if the ignition switch is kept in the ON or ACC
position for a long time while the engine not running.
nMap Disc
lRefer to “Handling and Care of Map Discs” to know how to handle a map
disc ( page 58).
1Turn the ignition switch
to the ON position and
press to open
the display.
Note
l This display angle can be adjusted by pressing .
When the is
pressed, the display
angle changes in
stages.
lPress to close the display.
2Insert the map disc
with the printed side
facing up.
Note
lThe main unit is located under the front passenger
seat.
lCondensation may form on the optical lens or the
map disc inside the unit when the temperature in
the vehicle increases in a short time such as when
heating the car on a cold day. This condensation
may cause malfunctions. If so, unload the map disc
and do not operate the unit for approximately 1
hour. Wipe the condensation off the map disc with a
soft cloth.
If the unit does not operate correctly after 1 hour,
consult an Authorized Mazda Dealer.
Cautions
OPEN/CLOSE
TILT
TILT
OPEN/CLOSE
(CAUTION) screen
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

13
Getting started
lThe Current Position screen appears.
Note
lYou can select the language by select and press . You can also change the
selected language using Language Selection. ( page 49)
lThe CAUTION screen remains on the display unless you select and press .
When the ignition switch is in the ACC position and press (EJECT).
Select the buttons by using Joystick and press .
Colors for unavailable buttons will be pale.
3Read CAUTION
carefully, and select
and press
.
Removing the Map Disc
Buttons on the screen
ENTER
Most functions are inhibited while the
vehicle is in motion.
Please read the handbook for operation
instructions.
Always obey traffic regulations.
Caution
ENTER
ENTER
Do not get your hand or fingers caught in
moving parts or in the disc slot. This can
cause injuries. Children are inquisitive, try
to install or remove the map disc without
infants looking on.
Caution
EJECT
ENTER
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

14
Routing Address
Book Getting started
Screen Names and Functions
Screens Before Setting Route
(1) Map Orientation control
( page 16)
(2) GPS (Global Positioning System) marker
( page 52)
(3) Clock
Clock will be displayed when you set up
Clock on Navigation Set Up On.
(4) Vehicle marker
Shows the current position and
direction of your vehicle.
(5) Scale display
Displays the scale of the map.
(6) Distance from current position
Displays the distance from the current
position to the position pointed by .
(7) Set Destination button
The destination, memory point or way point
will be set at the position pointed by in the
scroll screen.
(8) Store Memory Point button
Stores markers on the map.
(9) POI (Point of Interest) Display button
( page 26)
Screens During Route Guidance
(1) Distance and Time to Destination display
Displays the time* and distance to the
destination or way point.
Selecting this will display the next and
further information on the way point or
time and distance to the destination.
(* Either required time or estimated time
arrival)
(2) Route display
Shows the provided route as a thick
blue line.
(3) Turn Arrow display
Shows the direction to turn at the next
junction and the distance to the junction.
(4) Route Preferences button
( page 30)
(5) Current Road Name
Shows the name of the road you are
currently driving on.
RET
ENTER
ENTER
(6)
(7) (9)
(4)
(3)
(1)
(2)
(8)
RET
(5)
Current position screen
Returns after a
few seconds.
ENTER
(4)
(3)
(1)
(2)
Returns after a
few seconds.
RET
(5)
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

15
Getting started
Menu appears when pressing .
Display Menu screen will be shown when you press (DISP) and hold.
Note
Display Menu screen will be disappeared when they have been unused during a few seconds.
nAdjusting the screen quality
lAdjusts the screen brightness
Select "ADJ", and then "BRIGHT". The screen will brighten when scrolling to the right, or
darken when scrolling to the left.
lAdjusts the screen contrast
Select "ADJ", and then "CONTRAST". The screen will lighten when scrolling to the right, or
deepen when scrolling to the left.
Note
lAdjust by scrolling the Joystick to the right and left.
lRestore the adjustment value to the default when selecting “RESET”, press .
nClearing the screen
Select “DISP OFF”, press and the screen will disappear.
The screen will appear again when pressing any buttons.
nDaytime screen/Night screen
The screen can be returned to the daytime screen when the headlights or running lights
are on. Press (DISPLAY) and hold, then select "DAY MODE" and press .
lThe screen can be returned to the daytime screen while the headlights or running lights
are on using the dashboard illumination switch in the dashboard (Black-out meter).
Menu
Screen adjustments and settings
MENU
Destination Entry and Route Search ( page 18)
Address Book ( page 34)
Cancel Guidance ( page 29)
Route Options ( page 30)
Volume ( page 40)
Navigation Set Up ( page 42)
VOICE
ENTER
ENTER
VOICE ENTER
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

16
Routing Address
Book Getting started
Screen change
nDo not keep your eyes fixed on the monitor screen or operate the system
while driving
Do not change the settings and destination locations while driving. Minimize the time
spent viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and may
cause an accident. Always stop the vehicle in a safe location and use the parking brake
before operating the system.
Map
orientation
Map scale
Changing the Map Orientation/Scale
Warning
1Press
2Select , and
press
lNorth Up: Geographic north is up.
l Head Up: The direction you are
heading is up.
ENTER
ENTER
1lThe map can be displayed in
13 steps with scales from
to .
lZOOM OUT: Enlarges the map.
lZOOM IN: Reduces the map.
(more detail.)
ZOOM
Position before change <Scale bar>
Imperial
display
1/32 mi
(mile)
1/4 mi
(mile)
2 mi
(mile)
16 mi
(mile)
128 mi
(mile)
Metric
display 50 m 500 m 4 km 32 km 256 km
ZOOM
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

17
Getting started
MEMO
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

18
Before Use
Getting started Routing
Destination Entry and Route Search
lYou can set the destination using various methods provided by the system.
Before Steps
select
Change
(Change
Search Area)
Address
MENU ENTER
Open the [DESTINATION
ENTRY] Menu
Select
Select the desi
: ID, OR, WA,
: CA, NV
: AZ, CO, MT, N
M
: IA, KS, MN, M
O
: OK, TX
: IL, IN, KY, MI,
O
Open the
[DESTINATION
ENTRY] Menu
Select When narrowing
down to city name
Select
When narrowing
down to street name
Select
Enter the
street
name and
select
:
Cancel the
city selection.
:
Displays list of
5 city name s
n earest the
current
position.
:
Displays the
city name
input screen.
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

19
Before Use
Getting started Routing
lFor Character Entry, please refer to page 27.
l Do not keep your eyes fixed on the monitor screen or operate the system while driving.
Do not change the settings and destination locations while driving. Minimize the time spent
viewing the monitor screen and listening to the voice guidance while driving. Operating the system
will distract the driver from looking ahead of the vehicle and may cause an accident. Always stop
the vehicle in a safe location before operating the system.
l Route searches with the navigation system can include roads that you cannot drive on and roads that you
are prohibited from driving on due to traffic regulations. Please comply with the traffic regulations.
Warnings
Select the desired Search Area
: ID, OR, WA, : AR, AL, LA, MS, TN
: CA, NV : CT, MA, ME, NH, NJ, NY, RI, VT
: AZ, CO, MT, NM, UT, WY : DC, DE, MD, PA, VA, WV
: IA, KS, MN, MO, ND, NE, SD : FL, GA, NC, SC
: OK, TX : CANADA
: IL, IN, KY, MI, OH, WI
ENTER RET
n
narrowing
to city name
n
narrowing
to street name
Enter the
street
name and
select
:
Cancel the
city selection.
:
Displays list of
5 city name s
n earest the
current
position.
:
Displays the
city name
input screen.
Select the
street name
from the list
Select
the
city
name
from
the
list
Enter
the
city
name
and
select
Enter
the
street
name
and
select
Select
the
city
name
from
the
list
Select the city
name from the
list
Select
the
street
name
from
the
list
Enter
the
street
name
and
select
Select the
street name
from the list
Enter
the
house
no.
Enter
the
house
no.
Select
Select Direct
destination
input
(
page 28)
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/

20
Before Use
Getting started Routing
Destination Entry and Route Search
Point of
interest
Open the
[DESTINATION
ENTRY] Menu
Select When entering
the destination
point directly
Select
When narrowing
down to category
name
Select
When narrowing
down to city
name
Select
When narrowing
down to the
nearest facility
Select
When narrowing
down to a phone
number
Select
Select the
category
name from
the list
:
Cancel the
city selection.
:
Displays list
of 5 city
names
nearest the
current
position.
:
Displays the
city name
input screen.
:
for facilities clo
s
nearest city hal
l
:
for facilities nea
position.
:
S
facilities near th
position.
Searches for fa
c
the current des
t
Enter the phon
e
and select
/#<&#A0#8+A'#DQQM2CIG9GFPGUFC[#WIWUV#/