Mazda NAVIGATION SYSTEM User manual

Before Use
Getting
started
Routing
Address
Book
Voice
Recognition
Rear View
Monitor
Navigation
Set Up
Preparation
NAVIGATION
SYSTEM
See page for specific information.
See page for specific information.
See page for specific information.
Immediate use
Advanced use
See page for specific information.
Rear View Monitor
If
necessary
See page for specific information.
If necessary
Audio
System
See page for specific information.
Audio System
5
4
4
5
61
77
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

2
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Accessories
Please contact an Authorized Mazda Dealer if you are missing the
following accessory.
lMap Disc
CAUTION:
THIS PRODUCT IS A CLASS I LASER PRODUCT.
HOWEVER THIS PRODUCT USES A VISIBLE/
INVISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THIS PRODUCT
CORRECTLY AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Laser products:
Wavelength: 650 nm
Laser power: No hazardous radiation is emitted with safety protection.
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

3
Before Use If
necessary
Rear View Monitor
MEMO
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

4
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Contents
Preparation
nBefore Use
Accessories........................................................................................ 2
Laser products ................................................................................... 2
Contents............................................................................................. 4
Safety Information .............................................................................. 6
Introduction ........................................................................................ 8
(Product Use Safety), (Navigation System), (Screens)
Names and Functions ........................................................................ 9
Immediate use
nGetting started
lActivation....................................................................................... 12
(Removing the Map Disc), (On-screen Buttons)
lScreen Names and Functions....................................................... 14
(Screens Before Setting Route), (Screens During Route Guidance),
(Menu), (Screen adjustments, beep alert and other settings)
lScreen change.............................................................................. 19
(Changing the Map Orientation/Scale)
nRouting
lDestination Entry and Route Search............................................. 20
(Change (Change Search Area)), (Address), (Point of interest),
(Emergency), (Memory Point), (Home), (Preset Destination),
(Previous Destination), (Intersection), (Freeway On/Off Ramp),
(Coordinates), (Select from map)
lQuick POI...................................................................................... 28
(Displaying POI(s) on a Map), (Local Search), (Deleting POI Markers),
(Showing POI Data)
lCharacter Entry............................................................................. 29
(Street name, city name, and other input),
(House phone number, and other input)
lDirect Destination Input................................................................. 30
(Direct Destination Input), (Selecting Route)
lPOI Icons on Maps / Delete Destination ....................................... 31
(POI (Point of Interest) Icons), (Delete destination)
lRoute Options ............................................................................... 32
(Route Preferences), (Modification of Destination or Way Point Positions),
(Deletion of Destination or Way Points), (Detour), (Turn List),
(Display Preview), (Route Preview)
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

5
Before Use If
necessary
Rear View Monitor
Advanced use
nAddress Book
lAddress Book ................................................................................ 36
(Memory Point Storage), (Memory Point Confirmation and Modification),
(Preset Destinations or Home Storage), (Memory Point Deletion),
(All Memory Point Deletion), (Displays Icons at Memory Points),
(Avoid Area Storage), (Avoid Area Confirmation and Modification),
(Avoid Area Deletion), (All Avoid Area Deletion),
(Category Name Modification),(Previous Destination Deletion),
(All Preset Destination Deletion)
nVoice Recognition
lVoice Recognition.......................................................................... 40
(Voice Recognition Structure), (Language Select), (Basic Usage Pattern),
(Cancel Voice Recognition), (Voice Recognition Command)
lVolume Adjustment........................................................................ 42
nNavigation Set Up
lNavigation Set Up.......................................................................... 44
(User Setting), (Quick POI Selection), (Calibration),
(Restore System Defaults), (Language), (Map Configuration)
If necessary
nIf necessary
lPrecautions/System Performance ................................................. 53
(Voice Guidance), (GPS), (Map Matching), (Positioning Accuracy),
(Route Guide), (Route Search)
lTroubleshooting ............................................................................. 57
(Verification First), (Error Messages)
lMaintenance.................................................................................. 60
(Care of the Product), (Handling and Care of Map Discs)
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

6
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Safety Information
nRead this owner’s manual for your Navigation System carefully before using the system.
It contains instructions about how to use the system in a safe and effective manner.
Mazda assumes no responsibility for any problems resulting from failure to observe the instructions
given in this manual.
nThis manual uses pictographs to show you how to use the product safely and to alert you to potential
dangers resulting from improper connections and operation. The meanings of the pictographs are
explained below. It is important that you fully understand the pictographs and explanations in order to
use this manual and the system properly.
Warning
Warning The presence of this Warning symbol in the text is intended to
alert you to the importance of heeding the operation
instructions. Failure to heed the instructions may result in
severe injury or death.
nDo not keep your eyes fixed on the monitor screen or operate the system
while driving.
Do not change the settings and destination locations while driving. Minimize the time
spent on viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and can
cause accidents. Always stop the vehicle in a safe location and use the parking brake
before operating the system.
nAlways obey local traffic regulations.
Your guided route may include roads that are not open to vehicles or are closed due to
traffic regulations. Comply with the local traffic regulations and take another route.
nDo not use the unit when it is out of order.
If the unit is out of order (no image, no sound) or in an abnormal state (has foreign matter
in it, is exposed to water, is smoking, or smells), then turn it off immediately and consult
with an authorized dealer, we recommend an Authorized Mazda Dealer. Using the unit in
an out-of-order condition may lead to accidents, fires, or electric shocks.
nUse the proper power supply.
This product is designed for operation with a negative grounded 12 V DC battery system.
nDo not disassemble.
Do not disassemble the product or attempt to repair it yourself. If the product needs to be
repaired, take it to an authorized dealer, we recommend an Authorized Mazda Dealer.
Warnings
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

6
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Safety Information
nRead this owner’s manual for your Navigation System carefully before using the system.
It contains instructions about how to use the system in a safe and effective manner.
Mazda assumes no responsibility for any problems resulting from failure to observe the instructions
given in this manual.
nThis manual uses pictographs to show you how to use the product safely and to alert you to potential
dangers resulting from improper connections and operation. The meanings of the pictographs are
explained below. It is important that you fully understand the pictographs and explanations in order to
use this manual and the system properly.
Warning
Warning The presence of this Warning symbol in the text is intended to
alert you to the importance of heeding the operation
instructions. Failure to heed the instructions may result in
severe injury or death.
nDo not keep your eyes fixed on the monitor screen or operate the system
while driving.
Do not change the settings and destination locations while driving. Minimize the time
spent on viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and can
cause accidents. Always stop the vehicle in a safe location and use the parking brake
before operating the system.
nAlways obey local traffic regulations.
Your guided route may include roads that are not open to vehicles or are closed due to
traffic regulations. Comply with the local traffic regulations and take another route.
nDo not use the unit when it is out of order.
If the unit is out of order (no image, no sound) or in an abnormal state (has foreign matter
in it, is exposed to water, is smoking, or smells), then turn it off immediately and consult
with an authorized dealer, we recommend an Authorized Mazda Dealer. Using the unit in
an out-of-order condition may lead to accidents, fires, or electric shocks.
nUse the proper power supply.
This product is designed for operation with a negative grounded 12 V DC battery system.
nDo not disassemble.
Do not disassemble the product or attempt to repair it yourself. If the product needs to be
repaired, take it to an authorized dealer, we recommend an Authorized Mazda Dealer.
Warnings
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

7
Before Use If
necessary
Rear View Monitor
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Caution
Caution The presence of this Caution symbol in the text is intended to
alert you to the importance of heeding the operation
instructions. Failure to heed the instructions may result in injury
or material damage.
nDo not use the product where it is exposed to water, moisture, or dust.
Exposure to water, moisture, or dust may lead to smoke, fire, or other damage to the unit.
Make especially sure that the unit does not get wet in car washes or on rainy days.
nKeep the voice guidance volume at an appropriate level.
Keep the volume level low enough to be aware of road and traffic conditions while driving.
nProtect the Deck Mechanism.
Do not insert any foreign objects into the slot of this unit.
nThis navigation system is designed exclusively for use in automobiles.
This navigation system should only be installed in an automobile. Do not install it in a
ship, aircraft, or any other vehicles except an automobile. Do not use it detached from the
vehicle.
nDo not insert or allow your hand or fingers to be caught in the unit.
To prevent injury, do not get your hand or fingers caught in moving parts or in the disc
slot. Especially watch out for infants.
Cautions
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

8
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
Introduction
nExtremely low or high temperatures may interfere with normal operation
The inside of the vehicle can become very hot or cold when it is parked for extended
periods in direct sunlight or in cold places with the engine turned off. The navigation system
may not operate normally under such circumstances. Turn off the navigation system until
the inside of the vehicle has cooled down or warmed up. If the system does not operate
thereafter, consult an authorized dealer, we recommend an Authorized Mazda Dealer.
This navigation system utilizes GPS* satellite signals, a speed sensor and gyrosensor to track
and display your vehicle’s current position, and to guide you from your starting point to your
destination along a calculated route.
* : GPS (Global Positioning System) is a position detecting system utilizing the signals from GPS satellites
deployed by the U.S. Defense Department.
Screens displayed in this manual may differ from those on the actual display.
Product Use Safety
Navigation System
Screens
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

9
Before Use If
necessary
Rear View Monitor
Names and Functions
The navigation system can be operated by pressing a button on the panel (panel button) or
selecting a button displayed on the screen (on-screen button).
1. FM/AM button: FM/AM broadcast reception. Each time the button is pressed,
the reception mode switches through three reception modes:
FM 1 FM 2 AM.
2. SAT button: SIRIUS digital satellite radio reception.
3. CD button: CD playback.
4. MEDIA button: Image and Sound playback is possible using a portable video
player connected to an external input terminal.*1
Sound playback is possible using an audio player connected to
an external input terminal.*1
AUX1: External sound
AUX2: External image
5. LOAD/EJECT button: CD loading and ejection.
If the display is left in the lowered position for a certain period
of time, a beep sound is heard and the display closes
automatically.
6. NAVI button*2 : Display of the navigation screen and the vehicle's present
location.
7. MENU button*2 : Menu screen display (various settings).
1234
Panel button On-screen button Panel button
10
11
12
13
6
5
7
8
9
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

10
Before Use
Navigation Set Up
RDM-TMC If
necessary
Rear View Monitor
8. RTN button*2 : Button used to return to the previous screen.
9. DISP button: Screen brightness/contrast mode selection and adjustment
display.
10.POWER/VOLUME button: The volume can be adjusted by turning the dial. Turn the audio
unit off by pressing the dial.
11.TUNE/SEEK button: Performs tuning (short press) and searching (long press) in
FM/AM mode. Performs track skip (short press) and fast-
forward/reverse (long press) in CD mode.
12.SCAN button: Performs scanning operation in FM/AM and CD modes.
13.AUDIO button: Audio unit-related operation screen display (preset display of
FM and AM).
The on-screen touch button "SOUND" is constantly displayed
at the bottom of the audio unit-related screen for displaying the
sound quality adjustment screen when selected.
*1 : The external input terminal is not equipped on your vehicle
because it is not standard equipment.
*2 : For navigation unit operation
Note
lIf there is no response after selecting the on-screen button, remove your finger from the
screen and select it again.
lOn-screen buttons that cannot be operated are not illuminated.
Select the on-screen button lightly with your finger.
Selecting the on-screen buttons using objects that have a hard or sharp end such
as a ball point pen or mechanical pencil could cause a malfunction.
Caution
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

11
Before Use If
necessary
Rear View Monitor
MEMO
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

12
Routing Address
Book Getting started
Activation
Insert the map disc into the unit to start the Mobile Navigation System.
Note
lThe map disc cannot be inserted or ejected while the ignition switch is in the OFF position.
lRemember that the battery can run down if the ignition switch is kept in the ACC or ON
position for a long time while the engine not running.
nMap Disc
lRefer to “Handling and Care of Map Discs” to know how to handle a map
disc ( page 60).
1Insert the map disc
with the printed side
facing up.
Note
lThe main unit is located under the front passenger
seat.
lCondensation may form on the optical lens or the
map disc inside the unit when the temperature in
the vehicle increases in a short time such as when
heating the car on a cold day. This condensation
may cause malfunctions. If so, unload the map disc
and do not operate the unit for approximately 1
hour. Wipe the condensation off the map disc with a
soft cloth.
If the unit does not operate correctly after 1 hour,
consult an Authorized Mazda Dealer.
Note
lWhen the ignition switch is in the ACC or ON
position, the screen changes as follows to activate
the navigation system.
lThe screen (audio or navigation) that was displayed
prior to the engine being turned off is displayed.
Before the navigation screen is displayed, the
CAUTION screen will be displayed.
Cautions
(CAUTION) screen
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

13
Getting started If
necessary
Rear View Monitor
lThe Current Position screen appears.
Note
lYou can select the language by selecting the on-screen button. You can also
change the selected language using Language Selection. ( page 51)
lThe CAUTION screen remains on the display unless you select the on-screen
button.
Select the on-screen button lightly with your finger.
Colors for unavailable buttons will be pale.
2Read the CAUTION
carefully, and select
the on-screen
button.
Removing the Map Disc
1With the ignition switch in the ACC position, remove the bracket.
2Press (EJECT).
On-screen Buttons
Most functions are inhibited while the
vehicle is in motion.
Please read the handbook for operation
instructions.
Always obey traffic regulations.
Caution
Screw
Screw
Bracket
Do not get your hand or fingers caught in
moving parts or in the disc slot. This can
cause injuries. Children are inquisitive, try
to install or remove the map disc without
infants looking on.
Caution
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

14
Routing Address
Book Getting started
Screen Names and Functions
Screens Before Setting Route
(1) Map Orientation control
( page 19)
(2) GPS (Global Positioning System) marker
( page 54)
(3) Clock
Clock will be displayed when you set up
Clock on Navigation Set Up On.
(4) Vehicle marker
Shows the current position and
direction of your vehicle.
(5) Scale display
Displays the scale of the map.
(6) Distance from current position
Displays the distance from the current
position to the position pointed by .
(7) Current Road Name
Shows the name of the road you are
currently driving on.
(8) Set Destination button
The destination, memory point or way point
will be set at the position pointed by in the
scroll screen.
(9) Store Memory Point button
Stores markers on the map.
(10) Quick POI Display button
( page 28)
(11) Reduces the map screen
( page 19)
(12) Enlarges the map screen
( page 19)
Screens During Route Guidance
(1) Distance and Time to Destination display
Displays the time* and distance to the
destination or way point.
Selecting this will display the next and
further information on the way point or
time and distance to the destination.
(* Either required time or estimated time
arrival)
(2) Route display
Shows the provided route as a thick
blue line.
(3) Turn Arrow display
Shows the direction to turn at the next
junction and the distance to the junction.
(4) Route Preferences button
( page 32)
NAVI
(6)
(7)
(8) (10)
(5)
(4)
(3)
(1)
(2)
MAP SCROLL
(9)
(11) (12)
(4)
(3)
(1)
(2)
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

15
Getting started If
necessary
Rear View Monitor
Menu appears when pressing .
Display menu screen will be shown when you press the (DISP) button.
Press the (DISP) button to display the display menu.
nAdjusting the screen quality
lScreen brightness
Press the on-screen button to brighten the screen, or to darken.
lScreen contrast
Press the on-screen button to increase contrast, to decrease.
lScreen color density (During external image input after pressing the (MEDIA) button.*)
Press the on-screen button to increase color density, to decrease.
lScreen color adjustment (During external image input after pressing the (MEDIA) button.*)
Select using the on-screen button to enhance the red intensity, or to enhance the green.
Note
lSelect the on-screen button to restore the adjustment values to the default settings.
lThe screen changes to SETTINGS when the on-screen button is selected.
lOnly BRIGHTNESS and CONTRAST adjustments are available for screens other than the
video screen. TINT and COLOR are also available while the video screen is displayed.
nTurning off the display
Select the on-screen button to turn off the display.
The screen will reappear if the (NAVI) button is pressed, or the on-screen
button, which is displayed on the screen when the (DISP) button is pressed, is selected.
* The external input terminal is not equipped on your vehicle because it is not standard equipment.
Menu
Screen adjustments, beep alert and other settings
MENU
Destination Entry and Route Search ( page 20)
Address Book ( page 36)
Cancel Guidance ( page 31)
Route Options ( page 32)
Volume ( page 42)
Navigation Set Up ( page 44)
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

16
Routing Address
Book Getting started
nDaytime/Night screen
When the headlights are on, daytime mode can also be selected (Daytime mode can also
be selected while the headlights are turned on.).
nTilt display operation
Select the on-screen button to tilt the display, to close it.
The display angle can be adjusted in three stages.
When opening, the display angle changes one stage at a time each time the on-
screen button is pressed.
When closing, the display angle changes one stage at a time each time the on-screen
button is pressed.
Press the (DISP) button followed by the on-screen button to display the
settings menu.
nReturning to the navigation screen from the audio unit screen
lSelect the on-screen button to set the function to return to the navigation screen
from the audio unit screen by operation of the button only.
lSelect the on-screen button to set the function to return to the navigation screen
from the audio unit screen automatically after 20 seconds.
nBeep sound settings
lSelect the on-screen button to activate the operation beep sound.
lSelect the on-screen button to deactivate the operation beep sound.
nScreen Size Setting
The size of the screen can be changed during external image input*.
1. Press the (MEDIA) button .
2. Select the on-screen button to set the desired screen size.
3. The on-screen button of the desired screen size is selected.
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

17
Getting started If
necessary
Rear View Monitor
nFull screen
A full-screen image is displayed.
lA 16:9 screen ratio image is shown in the above figure.
nNormal screen
A 4:3 screen ratio image is the standard display, and black bands appear on each side of the
screen.
lA 16:9 screen ratio image is scaled to a 4:3 screen ratio.
nWide screen
The center area of the image is compressed toward the center, and the surrounding area is
enlarged toward the edge.
lA 16:9 screen ratio image is shown in the above figure.
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

18
Routing Address
Book Getting started
nCinema screen
The image is enlarged upward and downward. A 4:3 and 16:9 screen ratio image are dis-
played with the upper/lower part of the image cut off.
lA 16:9 screen ratio image is shown in the above figure.
Note
The display varies depending on the style of the image recorded on the disc.
Refer to the following table and set the screen size.
* The external input terminal is not equipped on your vehicle because it is not standard equipment.
Image style Recommendation
4:3 Normal or wide screen
16:9 Full screen
Letter box Full or cinema screen
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/

19
Getting started If
necessary
Rear View Monitor
Screen change
nDo not keep your eyes fixed on the monitor screen or operate the system
while driving
Do not change the settings and destination locations while driving. Minimize the time
spent viewing the monitor screen and listening to the voice guidance while driving.
Operating the system will distract the driver from looking ahead of the vehicle and may
cause an accident. Always stop the vehicle in a safe location and use the parking brake
before operating the system.
Map
orientation
Map scale
Changing the Map Orientation/Scale
Warning
1Select , on-
screen button.
lNorth Up: Geographic north is up.
l Head Up: The direction you are
heading is up.
1Select or on-screen
button.
lThe map can be displayed in
13 steps with scales from
to .
lZOOM OUT: Enlarges the map.
lZOOM IN: Reduces the map.
(more detail.)
Position before change <Scale bar>
Imperial
display
1/32 mi
(mile)
1/4 mi
(mile)
2 mi
(mile)
16 mi
(mile)
128 mi
(mile)
Metric
display 50 m 500 m 4 km 32 km 256 km
%:A'#DQQM2CIG6JWTUFC[/CTEJ2/