mazzivo LUGO User manual

LUGO
www.mazzivo.pl
assembly instructions

LUGO
www.mazzivo.pl
assembly instructions
4
21
6
7
8
39
10
12
11
5
To assemble the bed, you will need the following:
a battery-powered screwdriver, a cross-head screwdriver, an 8mm Allen wrench, a hammer
- two adults.
Bed frame:
Side panels (1,2) - 2 pcs
Footrest (3) - 1 pc
Footboard (4) - 1 pc
Blade (5) - 1 pc
Backrest (6) - 1 pc
Shelf (7) - 1 pc
Elements of the frame (8) -1 pc
Shelf (9) - 1 pc
Bed support:
Central board (10) - 1 pc
Bars (11,12) - 2 pcs
Note:
Some elements of the structure may already be mounted in the bed frame, therefore their number may
change. If there are any components missing, please contact our customer service department.
General safety notes: Keep all small parts and parts of the frame away from children! Heavy items should
not be lifted up by one person!
Fixing elements:
Eccentric (A) - 12 pcs
Mandrel (C) - 12 pcs
Peg (G) - 20 pcs
SPAX screw - 8 pcs
Screw (J) - 4 pcs

LUGO
www.mazzivo.pl
assembly instructions
2. Assembly of pegs (G) and mandrels in the
side panels of the bed (1,2)
1. Assembly of eccentrics (A) to boxes of ele-
ments of the bed frame, the arrows indicate
the outer edge
3. Assembly of pegs (G) and mandrels in the
side panels of the bed (1,2)
4. Connecting the side panels (1) to the
footrest (3), tightening the eccentric with a
screwdriver.

LUGO
www.mazzivo.pl
assembly instructions
5. Tightening the eccentrics with a screwdri-
v e r.
6. Connecting the side panel (1) to the fo-
otboard (4), tightening the eccentrics with a
screwdriver.
7. Assembly of the blade (5) to the footboard
(4).
8. Assembly of the backrest (6) to the side
panel (1), tightening the eccentrics with a
screwdriver.

LUGO
www.mazzivo.pl
assembly instructions
9. Connecting the backrest (6) to the footbo-
ard (4) with the screws (J).
10. Assembly of the shelf (7) to the side pa-
nel (1).
11. Assembly of an element of the frame (8)
to the side panel (1), tightening the eccen-
trics with a screwdriver.
12. Assembly of the shelf (9) to the side pa-
nel (1).

LUGO
www.mazzivo.pl
assembly instructions
13. Assembly of the central board (10)
14. Assembly of the side panel (2), connec-
ting with other element of the bed, tightening
the eccentrics with a screwdriver.
15. Assembly of bars (11,12)
16. Screwing the board (10) with the bars
(11,12)

LUGO
www.mazzivo.pl
assembly instructions
16. Screwing the spax screws in the ttings
that x the bars (11,12)
When this is done, the bed frame can be put
on the legs.

LUGO
www.mazzivo.pl
assembly instructions
1. Putting caps of the frame on the pegs.
2. Inserting the boards of the frame into the
caps, as in the example shown in the pictu-
res.
assembly instructions
A silent sleep system