mazzivo POOL User manual

POOL
www.mazzivo.pl
assembly instructions

POOL
www.mazzivo.pl
assembly instructions
1
2
3
4
5
67
To assemble the bed, you will need the following:
a battery-powered screwdriver, a cross-head screwdriver, an 8mm Allen wrench, a hammer
- two adults.
Bed frame:
Footrest 2 - 1 pc
Side panels (3) - 1 pc
Headboard (1,4) - 2 pcs
Bed support:
Central board(5) - 1 pc
Bars (6,7) - 2 pcs
Fixing elements:
Note:
Some elements of the structure may already be mounted in the bed frame, therefore their number may
change. If there are any components missing, please contact our customer service department.
General safety notes: Keep all small parts and parts of the frame away from children! Heavy items should
not be lifted up by one person!
Eccentric (A) - 8 pcs
Mandrel (C) - 8 pcs
Peg (G) - 8 pcs
SPAX screw - 8 pcs

POOL
www.mazzivo.pl
assembly instructions
1. Assembly of pegs (G) in the side panels of
the bed (1,4)
2. Assembly of mandrels in the side panels of
the bed (1,4)
3. Assembly of eccentrics (A) to boxes of ele-
ments of the bed frame, the arrows indicate
the outer edge
4. Connecting the footrest (2) and the head-
board (3) with the side panel (1)

POOL
www.mazzivo.pl
assembly instructions
5. Tightening the eccentric with a screwdri-
v e r.
6. Connecting the legs with the central board
(5). 7. Assembly of the central board (5)
8. Connecting side panel (4) to the footrest
(2) and
the headboard (3).
9. Connecting the legs with the bars (6,7)
10. Assembly of bars (6,7)

POOL
www.mazzivo.pl
assembly instructions
11. Screwing the board (5) with the bars
(6,7)
12. Screwing the spax screws in the ttings
that x the bars (6,7)
When this is done, the bed frame can be put
on the legs.

POOL
www.mazzivo.pl
assembly instructions
1. Putting caps of the frame on the pegs.
2. Inserting the boards of the frame into the
caps, as in the example shown in the pictu-
res.
assembly instructions
A silent sleep system

POOL
www.mazzivo.pl
assembly instructions
assembly instructions
Variant with a headboard
1. Assembly of the headboard to the frame.
2. Screwing.