mazzivo MODO User manual

MODO
www.mazzivo.pl
assembly instructions

MODO
www.mazzivo.pl
assembly instructions
1
2 3
4
5
76
To assemble the bed, you will need the following:
a battery-powered screwdriver, a cross-head screwdriver, an 8mm Allen wrench, a hammer
- two adults.
Bed frame:
Footrest (1) - 1 pc
Side panels (2,3) - 2 pcs
Headboard (4) - 1 pc
Bed support:
Central board (5) - 1 pc
Central legs (6,7) - 2 pcs
Fixing elements:
Note:
Some elements of the structure may already be mounted in the bed frame, therefore their number may
change. If there are any components missing, please contact our customer service department.
General safety notes: Keep all small parts and parts of the frame away from children! Heavy items should
not be lifted up by one person!
Eccentric (A) - 4 pcs
Mandrel (C) - 4 pcs
Peg (G) - 8 pcs
Screw (J) - 4 pcs
Hex socket screw - 16 pcs
T-bolt screw - 4 pcs

MODO
www.mazzivo.pl
assembly instructions
1 Assembly of legs to the headboard and the
footrest (1,4) with hex socket screws
2 Assembly of eccentrics (A) to boxes of ele-
ments of the bed frame, the arrows indicate
the outer edge
3. Assembly of mandrels in the side panels of
the bed (2,3)
4. Assembly of pegs (G) in the side panels of
the bed (2,3)

MODO
www.mazzivo.pl
assembly instructions
5. Connecting side panels (2,3) to the fo-
otrest (1).
6. Tightening the eccentric with a screwdri-
v e r.
7. Connecting the legs (6,7) with the central
board (5).
8. Assembly of the central board (5).
9. Assembly of the headboard (4) to the side
panels (2,3).

MODO
www.mazzivo.pl
assembly instructions
10. Screwing the headboard (4) with the side
panels
(2,3).

MODO
www.mazzivo.pl
assembly instructions
1. Putting caps of the frame on the pegs.
2. Inserting the boards of the frame into the
caps, as in the example shown in the pictu-
res.
assembly instructions
A silent sleep system